• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.1
• /
• pp.61-68
• /
• 2008

A new cementitious material has been developed, called alkali-activated fly ash cement(AAFC), which is used to produce AAFC-concrete for construction. The effect of acid attack, sodium chloride solution, carbonation, freeze-thaw cycling, and SEM, XRD analysis of the AAFC-concrete prepared using alkali-activated fly ash cement and OPC-concrete were experimentally investigated. It was found that the acid resistance of AAFC-concrete(35 MPa) prepared from alkali-activated fly ash at 85$^{\circ}C$ for 24 hrs is far better than OPC-concrete(35 MPa). Also, the AAFC-concrete(35 MPa) had a similar resistance of OPC-concrete(35 MPa) to attack, such as sodium chloride solution, carbonation and freeze-thaw cycling.

• Journal of the Korean Ceramic Society
• /
• v.36 no.5
• /
• pp.555-563
• /
• 1999

Impregnation of phosphorous additiers into graphite bulk was studied with the goal of enhancing the effectiveness of oxidationprotection. In addition graphite acid washing was carried out prior to the impregnation further to improve oxidation resistance. Observation of the oxidation rate for raw graphite(Raw) impregnated graphite with tri-butyl phsophate on raw block(RP) and impregnated graphite on acid-treated graphite(AP) in air are reported. The phsophorus residue adsorbed on the graphite surface at active sites was determined by FTIR, XRS, TGA techniques. AP with tri-butyl phosphate was found to result in both 30% reduction in oxidation rate at 1000$^{\circ}C$ compared to Raw and increase of 120$^{\circ}C$ in oxidation temperature From the samples of oxidation rate of each specimen in Arrhenius plot it can be said that the present oxidation resistance origninates from the change of chemical reaction modesw neigther by acid-washing treatment nor phsophate impregnation

• Korean Journal of Veterinary Research
• /
• v.21 no.1
• /
• pp.25-31
• /
• 1981

A total of 250 enteric bacteria (148 Escherichia coli, 41 Klebsiella pneumoniae, 46 Enterobacter spp. and 15 Proteus spp.) isolated from bovine udder infections in 1979 through 1980 were examined for drug resistance and prevalence of R. plasmids. The drug tested were streptomycin (SM), kanamycin (KM), ampicillin (AP), chloramphenicol (CP), tetracycline (TC), gentamicin (GM), oxolinic acid (OA) and nalidixic acid (NA). The detection of R. plasmids was performed with Escherichia coli ML 1410 NAr as the recipient. Of the 148 Escherichia coli isolated, 68(45.9%) were found to be resistant to one or more drugs tested, and about 50% of the resistant strains were multiply resistant. of the 68 drugresistant strains, 13(19.1%) were found to carry R. plasmids which were capable of performing a conjugal transfer. CP resistance was transfered together with the other resistance. Of 41 strains of Klebsiella pneumoniae isolated, 90.2% were resistant to the drugs, alone or in combination thereof. Strains resistant to AP and TC were 63.4%, and 48.8%, respectively. R. plasmids were detected in 78.4% of the drug-resistant strains, and these strains transfered all or a part of their drug resistance pattern. AP and CP resistance were transfered in 100% of AP and CP-resistant strains. Eleven (37.9%) of 29 R. plasmids showed a thermosensitive transfer. Of the 46 strains of Enterobacter spp. isolated, 37(80.4%) were resistant to the drugs tested. A high percentage of resistance was noted for AP(65.2%). All strains resistant to four or more drugs transferred their resistances to Escherichia coli ML 1410, but strains resistant to three or fewer drugs did not transfer the resistances. All of the 15 Proteus strains isolated were resistant to more than two drugs. of them, 6 were quadruple resistance to SM, KM, CP and TC, and 9 were double one to AP and TC. Three (20.0%) of the drug-resistant isolates had R.plasmids conferring AP and TC resistance. GM, OA and NA of the drugs tested were very active to all of 250 Gram-negative enteric bacteria isolated from bovine udder infections.

• Journal of Sensor Science and Technology
• /
• v.20 no.1
• /
• pp.64-69
• /
• 2011

Porous manganese oxide porous nanostructures were prepared by amino-acid-mediated solvothermal self assembly reaction and subsequent heat treatment at $600^{\circ}C$. When Mn-precursors were heat-treated at $400-550^{\circ}C$, the sensors did not show significant gas responses. In contrast, the manganese oxide heat-treated at $600^{\circ}C$ showed the significant gas responses, that is, the resistance decrease to 100 ppm $C_3H_8$ ($R_a/R_g$ = 2.17, $R_a$ : resistance in air, $R_g$ : resistance in gas) and the resistance increase to 100 ppm $C_2H_5OH$ ($R_g/R_a$ = 1.92). The opposite change of resistance upon exposure to $C_3H_8$ and $C_2H_5OH$ was discussed in relation to the mixed phases of manganese oxides with different valences.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.2
• /
• pp.155-165
• /
• 2018

The objective of the research was to evaluate the effect of particle pre-treatment on physical, mechanical, and durability of jatropha fruit hulls (JFH) particleboard. The pre-treatments included were immersing in cold water, hot water, and acetic acid solution. After each treatment, the particles were dried up to 3% moisture content. Urea-formaldehyde (UF) resin was used to fabricate particleboards with board size, thickness and density target of 25 cm by 25 cm, 0.80 cm, and $0.70g/cm^3$, respectively. Board pressed at $130^{\circ}C$ for 10 minutes, and $25kg/cm^2$ pressure. The evaluation of particleboard followed the JIS A 5908-2003. Whilist their resistance to subterranean termite test (mass loss, mortality, antifeedant value and feeding rate) refers to the Indonesian standard (SNI 01.7207-2006). The physical and mechanical properties of particleboards showed that all pre-treatments decreased the pH of particles. Overall, all particle immersing treatments resulted of better physical and mechanical properties of particleboard than those of untreated ones. The acetic acid treatment resulted the best physical and mechanical properties of particleboard. Based on the mass loss of JFH particleboard, hot water and acetic acid treated particleboards were classified into weak resistance to subterranean attack. The other two treatments were classified into very weak resistance. Hot water treated particleboard provided the highest mortality and antifeedant as much as 87.40% and 34.20%, respectively. Based on antifeedant classification, hot water treated particleboards were classified into moderately strong resistance, while other treatments were categorized into weak resistance. The lowest feeding rate value ($45.30{\mu}g/termite/day$) was attained by hot water treatment.

• Microbiology and Biotechnology Letters
• /
• v.22 no.3
• /
• pp.240-245
• /
• 1994

Relation the phage defense mechanism of phage resistant Lactococcus lactis subsp. cremoris ATCC 11602-A1 to its cell wall components was investigated. To determine whether teichoic acid which is known to be one of the phage receptor site present on the cell wall, phage adsorption was examined after treatment 5% TCA(60%$\CIRC $C) and concanavalin A to the cell wall of A1 and parent strain. However, the adsorption rate of two strains did not change. Total amount of phosphate after TCA treatment did not change in both strains, but a difference between the two strains was observed. Ribitol and glycerol, components of teichoic acid, could not be detected in the cell walls of two strains by GC analysis. These results suggest that although teichoic acid was not present in the cell walls of both strains, the composition of cell wall of two strains was not identical. Measurement of amount of protein and SDS-polyacryamide gel electrophoresis were carried out to examine the involvement of cell wall protein in phage resistance, showing that protein is nothing to do with phage adsorption of parent strain, but phage resistance of A1 is related to protein. Cell wall carbohydrates of A1 contained rhamnose, glucose, and galactose. Total amount of carbohydrate of 1% SDS-treated A1 cell wall was reduced to the level of parent strain. The results suggest that phage resistance of A1 was due to the presence of a higher level of carbohydrates then parent strain, and to interaction of carbohydrate and protein.

• Macromolecular Research
• /
• v.17 no.10
• /
• pp.776-784
• /
• 2009

N,N-dimethyldodecylamine (tertiary amine)-modified MMT (DDA-MMT) was prepared as an organically modified layered silicate (OLS), after which styrene-butadiene rubber (SBR) nanocomposites reinforced with the OLS were manufactured via the latex method. The layer distance of the OLS and the morphology of the nanocomposites were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). By increasing the amount of N,N-dimethyldodecylamine (DDA) up to 2.5 g, the maximum values of torque, tensile strength and wear resistance of the SBR nanocomposites were increased due to the increased dispersion of the silicate layers in the rubber matrix and the increased crosslinking of the SBR nanocomposites by DDA itself. When SBR nanocomposites were manufactured by using the ternary filler system (carbon black/silica/OLS) to improve their dynamic properties as a tire tread compound, the tan $\delta$(at $0^{\circ}C$ and $60^{\circ}C$) property of the compounds was improved by using metal stearates instead of stearic acid. The mechanical properties and wear resistance were increased by direct substitution of calcium stearate for stearic acid because the filler-rubber interaction was increased by the strong ionic effect between the calcium cation and silicates with anionic surface. However, as the amount of calcium stearate was further increased above 0.5 phr, the mechanical properties and wear resistance were degraded due to the lubrication effect of the excessive amount of calcium stearate. Consequently, the SBR/organoclay nanocomposites that used carbon black, silica, and organoclay as their ternary filler system showed excellent dynamic properties, mechanical properties and wear resistance as a tire tread compound for passenger cars when 0.5 phr of calcium stearate was substituted for the conventionally used stearic acid.

• The Plant Pathology Journal
• /
• v.23 no.3
• /
• pp.203-209
• /
• 2007

Infection structures were observed using a fluorescence microscope at the penetration sites on the leaves of potato plants pre-inoculated with the bacterial strains Pseudomonas putida TRL2-3, Micrococcus luteus TRK2-2, and Flexibacteraceae bacterium MRL412, which mediated an induced systemic resistance on potato plants against late blight disease caused by Phytophthora infestans. In order to compare the infection structures on the leaves expressing systemic acquired resistance, the leaves of potato plants pre-treated with DL-3-amino butyric acid (BABA) were also observed after challenge inoculation with the same pathogen. The infection structures were investigated. The total number of germination and appressorium formation of P. infestans were counted. Furthermore, the frequencies of fluorescent epidermal cells at the penetration sites, which indicate a defense response of plant cell, were estimated. There were no differences on the germination rates of the fungal cysts among the untreated control, BABA pre-treated, and bacterial strains pre-inoculated plants. However, appressorium formation was slightly decreased on the leaves of BABA pre-treated plants compared to those of untreated as well as bacterial strains pre-inoculated plants. Furthermore, the frequencies of fluorescent cells of BABA pre-treated and bacterial strains pre-inoculated were higher than that of untreated plants, indicating an active defense reaction of the host cells against the fungal attack. On the other hand, the pre-treatment with BABA caused a stronger fluorescent of epidermal cells at the penetration sites compared to the pre-inoculation with the bacterial strains. Interestingly, the frequency of fluorescent cells by BABA, however, was lower than that by the bacterial strains. Based on the results it is suggested that the infection structures showing resistance reaction on the leaves of potato plants were different between by pre-inoculation with bacterial strains and by pre-treatment with BABA against the late blight pathogen.

• Korean Journal of Exercise Nutrition
• /
• v.23 no.3
• /
• pp.45-49
• /
• 2019

[Purpose] Recent studies suggest that ursolic acid (UA) is a potential candidate for a resistance exercise mimetic that can increase muscle mass and alleviate the deleterious effect of skeletal muscle atrophy on bone health. However, these studies evaluated the effects of UA on skeletal muscle and bone tissues, and they have not verified whether such effect could occur concurrently on muscle and bone, as is the case with resistance exercise. Thus, the aim of this study was to analyze the effect of UA injection on muscle mass and bone microstructure using an animal model of atrophy to demonstrate the potential of UA as a resistance exercise mimetic. [Methods] The immobilization (IM) method was used on the left hindlimb of Sprague Dawley (SD) rats for 10 days to induce muscle atrophy, whereas the right hindlimb was used as an internal control (IC). The animal models were divided into two groups, SED (sedentary, n=6) and UA (n=6) to demonstrate the effect of UA on atrophic skeletal muscles. The UA group received a daily intraperitoneal injection of UA (5 mg/kg/day) for 8 weeks. After 10 days of IM, the data collected for the IC were compared with that of IM to determine whether muscle atrophy might occur. [Results] Muscle atrophy was induced and bone mineral density (BMD) decreased significantly. The 8-week UA treatment significantly increased the gastrocnemius muscle mass compared to the SED group. In regard to the effect of UA on bones, negative results such as a decrease in BMD, trabecular bone volume fraction, and trabecular number, and an increase in trabecular separation, were observed in the SED group, but no such difference was observed in the UA group. No significant difference was observed in atrophic hindlimbs between SED and UA groups. [Conclusion] These results alone are insufficient to suggest that UA is a potential resistance exercise mimetic for atrophic skeletal muscle and weakened bone. However, this study will help determine the potential of UA as a resistance exercise mimetic.

• Korean Journal of Microbiology
• /
• v.50 no.3
• /
• pp.185-190
• /
• 2014

The aim of this study was to investigate the prevalence of quinolone resistant E. coli from raw bulk milk and to characterize the resistance determinants. In this study, the gyrA, gyrB, parC, and parE quinolone resistance determining regions (QRDR) were sequenced from quinolone resistant E. coli isolates. Also, the presence of plasmid-mediated quinolone resistance (PMQR) and the expression of efflux pump genes based on quantitative real-time PCR (qRT-PCR) were investigated. Of the 487 coliform bacteria, 9 strains showed nalidixic acid resistance, and 6 of the 9 nalidixic acid resistant isolates were also ciprofloxacin resistant. These 9 strains had a single mutation at codon 83 (S83L) in gyrA, 2 of them had double mutations at codon 83 and 87 (S83L and D87N) in gyrA and 3 of the 9 isolates had single mutations at codon 80 (S80I) in parC. None of the 9 isolates harbored PMQR determinants. Compared with wild-type E. coli ATCC 25922, an over-expression of the acrB gene (2.15-5.74 fold), encoding the pump component of the AcrAB-TolC efflux pump was observed in 4 of 6 ciprofloxacin resistant isolates. This study identified the quinolone resistance mechanism of E. coli isolated from raw milk samples in Gyeonggi-do.