• Journal of Magnetics
• /
• v.17 no.4
• /
• pp.280-284
• /
• 2012

This paper presents a method for evaluating interior permanent magnet synchronous motor (IPMSM) performance over the entire operation region. Using a d-q axis equivalent circuit model consisting of motor parameters such as the permanent magnetic flux, copper resistance, core loss resistance, and d-q axis inductance, a conventional mathematical model of an IPMSM has been developed. It is well understood that in IPMSMs, magnetic operating conditions cause cross saturation and that the iron loss resistance - upon which core losses depend - changes according to the motor speed; for the sake of convenience, however, d-q axis machine models usually neglect the influence of magnetic cross saturation and assume that the iron loss resistance is constant. This paper proposes an analysis method based on considering a magnetic cross saturation and estimating a core loss resistance that changes with the operating conditions and speed. The proposed method is then verified by means of a comparison between the computed and the experimental results.

• Journal of Information Technology Services
• /
• v.15 no.3
• /
• pp.15-31
• /
• 2016

Sales Force Automation (SFA) is a strategic information system and one of the components of operational CRM system. SFA supports salespeople's activities such as selection of potential customers, creative value proposition, after-sales services, etc. SFA is increasingly used in many companies because it has the advantages to raise the salespeople's productivity by developing forecasting ability, value proposition ability, after sales service ability etc. Many researches have shown that implementation of SFA leads to the increase of salepeople performance, organizational performance, and quality of customer relationship. However, Some prior studies have discussed on the SFA implementation failure and pointed out that one of important causes of this failure is salespeople's resistance to SFA. Although many researches explain SFA acceptance phenomenon using Technology Acceptance Model (TAM) and Theory of Planned Behavior (TPB), these researches didn't deeply investigate the salespeople's resistance to SFA. Therefore, this study focuses on the factors influencing salespeople's resistance to SFA and the relationships among these factors. This study identified three factors (salespeople's perceived loss of power, perceived loss of autonomy, and perceived time and effort waste) influencing salespeople's resistance to SFA. The hypotheses testing results showed that salespeople's perceived loss of power and perceived time and effort waste significantly increased salespeople's resistance to SFA. And salespeople's perceived loss of power plays a mediating role between perceived loss of autonomy/perceived time and effort waste and salespeople's resistance to SFA. At the end of the paper, theoretical and managerial implications of this study and the limitations and future research directions are discussed.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.6
• /
• pp.290-295
• /
• 2001

The transport loss of a Bi-2223 tape exposed to external magnetic fields was investigated. The results show that the transport loss is independent on voltage lead arrangements in case the magnetization loss is compensated. A serous increase of the transport loss due to external AC magnetic field is observed. The loss is described well by dynamic resistance loss in relatively high fields, but another mechanism than the dynamic resistance must be responsible for the increase of the loss in low fields. The transport loss is also dependent strongly on the orientation of the external fields.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.5
• /
• pp.473-477
• /
• 2005

A Bi-2223 tape has been developed for power applications such as a fault current limiter, a power cable and a superconducting magnetic energy storage system. In such applications, the Bi-2223 tape carries time varying transport current and in addition experiences time varying external magnetic field. It is well known that the external magnetic field not only causes magnetization loss in the Bi-2223 tape, but also drastically increases transport loss due to a so-called 'dynamic resistance' We developed an evaluation setup, which can measure transport loss in external at magnetic fields. Using this equipment, we measured the dynamic resistances for various amplitudes and frequencies of an external at magnetic field perpendicular to the face in the tape. Simultaneously we investigated the effect of an external ac field on transport loss with different experimental conditions. This paper describes test results ana discussions on correlation between the dynamic resistance and the transport loss for the Bi-2223 tape.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.5
• /
• pp.295-304
• /
• 2004

This paper deals with characteristic analysis method using d-q axis equivalent circuit considering iron loss in a single-phase line-start permanent magnet synchronous motor. The iron loss resistance to account for the iron loss is included in the equivalent circuit to improve the modeling accuracy. Furthermore, for the improved calculation of the iron loss, the iron loss is calculated from the magnetic flux density by 2-dimensional finite element method. The result is represented as the iron loss resistance and connected in parallel with the total induced voltage. Therefore, the currents can be expressed as the summation the output current with the current corresponding to the iron loss. Finally, the steady state characteristic analysis results are compared with the experimental results to verify this approach.

• Structural Engineering and Mechanics
• /
• v.83 no.6
• /
• pp.745-756
• /
• 2022

This study aims to determine the cause of the load resistance loss in storage racks that can be attributed to external forces such as earthquakes and to improve safety by developing reinforcement systems that can prevent load resistance loss. To this end, a static cyclic loading test was performed on pallet racks commonly used in logistics warehouses. The test results indicated that a pallet rack exposed to an external force loses more than 50% of its load resistance owing to the damage caused to column-beam joints. Three reinforcement systems were developed for preventing load resistance loss in storage racks exposed to an external force and for performing differentiated target functions: column reinforcement device, seismic damper, and viscoelastic damper. Shake table testing was performed to evaluate the earthquake response and verify the performance of these reinforcement systems. The results confirmed that, the maximum displacement, which causes the loss of load resistance and the permanent deformation of racks under external force, is reduced using the developed reinforcement devices. Thus, the appropriate selection of the developed reinforcement devices by users can help secure the safety of the storage racks.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.3
• /
• pp.173-181
• /
• 2022

PURPOSE. This analysis aimed to evaluate the intaglio surface trueness, antagonist's wear volume loss, and fracture resistance of full-contour crowns of (Y, Nb)-stabilized fully-sintered zirconia (FSZ), 4 mol% or 5 mol% yttria-stabilized partially sintered zirconia (4YZ or 5YZ) with high-speed sintering. MATERIALS AND METHODS. A total of 42 zirconia crowns were separated into three groups: FSZ, 4YZ, and 5YZ (n = 14). The intaglio surface trueness of the crowns was evaluated at the inner surface, occlusal, margin, and axial areas and reported as root-mean-square, positive and negative average deviation. Half of the specimens were aged for 120,000 cycles in the chewing simulator, and the wear volume loss of antagonist was measured. Before and after chewing, the fracture load was measured for each group. The trueness values were analyzed with Welch's ANOVA, and the wear volume loss with the Kruskal-Wallis tests. Effect of the zirconia type and aging on fracture resistance of crowns was tested using two-way ANOVA. RESULTS. The intaglio surface trueness measured at four different areas of the crown was less than 50 ㎛, regardless of the type of zirconia. No significant P in wear volume loss of antagonists were detected among the groups (P > .05). Both the type of zirconia and aging showed statistically significant effects on fracture resistance (P < .05). CONCLUSION. The full-contour crowns of FSZ as well as 4YZ or 5YZ with high-speed sintering were clinically acceptable, in terms of intaglio surface trueness, antagonist's wear volume loss, and fracture resistance after simulated mastication.

• Korean Journal of Human Ecology
• /
• v.9 no.4
• /
• pp.483-489
• /
• 2000

The purpose of this study is to verify the effect of cellulase treatment on crease resistance of cotton. Cotton fabrics was treated with cellulase under different concentration at $50^{\circ}C$ for 40 min. Also to compare the effect of DMDHEU treatment, DMDHEU treatment was conducted before and after cellulase treatment, also with cellulase. Weight loss, crease resistance and tentile strength of each samples were measured and compared. Maximum weight loss showed at 1g/l con. with 40 min. treatment. Cellulase enzyme treatment was more effective than DMDHEU in the crease resistance and tensile strength. Crease resistant of cotton which treated under different condition with cellulase and DMDHEU showed in the order of cellulase+DMDHEU> cellulase> DMDHEU treatment. Also, tensile strength showed in the order of cellulase> cellulase+DMDHEU> DMDHEU. Among those treatment conditions, condition which treated with cellulase considered more effective to increase crease resistance while keeping tensile strength too.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.50-52
• /
• 2019

Dynamic resistance equalization is a viable technique to balance SOC of cells in a parallel-connected battery configuration due to high equalization performance, simplicity and low-cost. However, an inappropriate design of the equalization resistor can degrade the equalization performance and increase the power loss. This paper proposes an optimization process to design the equalization resistors to minimize power loss and equalization error. The simulation results show that the optimally designed resistor significantly enhance the performance in comparison with the conventional fixed-resistor equalization.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.5
• /
• pp.1-10
• /
• 2008

Decay and mold resistance of zinc borate (ZB) and calcium borate (CB) modified oriented strandboard (OSB) from southern mixed hardwood and southern yellow pine was investigated in this study. Brown rot fungus Gloeophyllum trabeum and white-rot fungus Trametes versicolar were used to examine the decay resistance of the OSB. The OSB test specimens were colonized by brown and white rot fungal mycelium in both the brown and white-rot culture bottles after 8 and 12 weeks, respectively. The wood species and fungus type had the significant effects on the decay resistance. Brown rot decay was evident for all untreated southern pine and mixed hardwood controls. The white-rot decay, however, did not show significant weight loss at both species control samples. The incorporation of ZB and CB composites provides suitable protection against brown-and white-rot fungi. No significant weight loss was observed from the borate treated OSB.