• 한국응용과학기술학회지
• /
• 제24권3호
• /
• pp.253-263
• /
• 2007

Three different weather-resistant coatings were fabricated with the various weight ratios of a mill-base silicone/acrylic resin to let-down silicone /acrylic resin at 2:8, 3:7, and 4:6 respectively. The prepared coatings were tested to investigate the effect of composition of weather-resistant coatings on the physical properties. The thermal stability, salt spray exposure, and weather-resistance were improved with the increased silicone content. It was concluded that the optimum retio of mill-base silicone/acrylic resin to let-down silicone/acrylic resin would be 2:8 and the coating with 30 wt% of silicone content would have high weather-resistance.

• 한국세라믹학회지
• /
• 제34권8호
• /
• pp.797-802
• /
• 1997

The use of carbon materials in mechanical components such as bearings, seals, and bushings that do not require lubricants is increasing rapidly. This paper reports on establishing the optimal condition for resin-bonded carbon materials. We fixed the content ratio of materials, which include graphite powder and diatomite as a lubricant modifier and a friction modifier, respectably, with resin used as a bonding material. We then produced bushings using hot-pressing within the temperature range of resin curing. The properties of bushing, the friction coefficient, wear rate and the mechanical strengths are discussed in relation to the content of respective materials, with correlation of friction coefficient and sliding distance. Finally, we examined the friction coefficient changes according to the applied load on bushing and the friction coefficient changes according to contact speed of bushing.

• 한국표면공학회지
• /
• 제30권6호
• /
• pp.382-390
• /
• 1997

Good appearance of insulation coating is required for non-oriented silicon steel sheets, The property is influenced by both the chemical composition of coating solution and the species of resin. The composition of inorganic-organic coating was studied to obtain good surface quality for non-oriented silicon steel. The greenish degree of coating surface depended on $Cr^{3+}$ content in the coating layer, which was satisfied when chromate content was more than 54.60 wt. %, in the coating solution. The homogeneous pattern and roughness of the coating surface depended on spreading property of the resin. Surface appearance of the coating could be improved by using resin with good spreading property at the chemical composition of chromate 59.00 wt.%.. resin 34.23wt.%, and etyhylene glycol 6.67 wt.% without colloidal sillica.

• 반도체디스플레이기술학회지
• /
• 제11권2호
• /
• pp.23-26
• /
• 2012

The monodispersed polystyrene spheres were prepared by emulsion polymerization in aqueous alcohol system. They coated with silver by reduction of silver ion percolated on the surface of them. The spherical hollow type silver has been prepared by dissolving polystyrene with toluene. Epoxy resin compositions with spherical hollow type silver were manufactured, which were composed of a bisphenol F type epoxy resin (RE-304S), amine type hardener (Kayahard AA), and 1-benzyl 2-methyl imidazole (1B2MI) as catalyst. The electrical conductivity with silver content ratio were investigated after cure, the percolation threshold weight ratio for conductance in this epoxy resin system was obtained above the 70 wt% of silver.

• 한국환경과학회지
• /
• 제28권5호
• /
• pp.503-509
• /
• 2019

To prevent environmental pollution caused by leakage of leachate from waste landfill, vinyl acetate-ethylene (VAE) resin is applied to liner and cover materials to improve their performance. Styrene, styrene butadiene rubber, and VAE are widely used as polymer resins that have excellent water resistance and durability. Further, VAE resin is known to have additional advantages such as adhesion to nonpolar materials and resistance to saponification as a copolymer. In this study, the effect of VAE content on the properties of liner and cover materials was studied. The water and air content ratios, bending and compressive strengths, water absorption ratio, and coefficient of permeability of these materials were measured. The liner and cover materials with 4 wt% VAE showed good properties.

• Journal of the Korean Wood Science and Technology
• /
• 제31권3호
• /
• pp.17-23
• /
• 2003

As a fundamental study of developing sawdust board from thinning softwood logs from three species (Pinus densiflora S. et Z., Larix leptolepis G. and Pinus koraiensis S. et Z.), this study examined the effect of board density and resin content on physical and mechanical properties of sawdust board. As the board density increase, thickness swelling, bending strength, and Brinell hardness increased while water absorption decreased. With increasing the resin content, the bending strength and hardness increased while water absorption and thickness swelling decreased. The board made of L. leptolepis was slightly low in its water absorption, and the one made of P. koraiensis was a little high in its bending strength, while there was no definite difference between each kind of trees in their hardness values.

• 유변학
• /
• 제10권4호
• /
• pp.185-194
• /
• 1998

수지이동 성형공정에서 섬유직조가 수지에 의해 함침될 때 발생하는 기공 또는 나쁜 젖음성은 최종 성형품의 물성 저하에 심각한 영향을 미치게 된다. 본 연구에서는 함침공정에서의 수지 유동특성을 파악하고 기공 형성기구를 규명하기 위하여, 빔 형태의 금형을 대상으로 실리콘 오일과 평직형태의 유리섬유를 사용하여 미시적인 유동가시화 실험을 수행하였다. 시간과 압력에 따른 수지의 침투길이를 측정함으로써 섬유직조의 기공률에 따른 비정상상태의 투과계수와 모세관압을 측정하였고, 낮은 조업압력과 낮은 기공률에서는 모세관압이 함침공정에서 중요한 가공변수임을 확인할 수 있었다. 비디오 카메라를 이용하여 유동전단면의 이동을 근접 확대 촬영하여 기공이 형성되는 과정을 미시적으로 관찰함으로써, 섬유와 수지의 표면에너지에 의해 발생되는 모세관압이 기공의 형성에 미치는 영향을 조사하였다. 그 결과, 수지충전을 유발하는 전체 구동압력에서 모세관압이 상대적으로 클수록 기공은 더욱 쉽게 생성되는 것으로 나타났다. 또한 수지의 점도와 섬유직조의 기공률이 각각 변화할 때, 모세관수에 따른 기공의 함량을 화상 해석 기법(image analysis technique)을 사용하여 정량적으로 측정하였다. 수지가 섬유직조 내로 함침될 때 임계모세관수(Ca~2.75$\times$$10^{-3})이상에서는 기공이 형성되지 않았으며, 그 이하에서는 모세관수가 감소함에 따라 기공의 함량이 지수적으로 증가하였다. 생성된 기공의 함량은 점도에 관계없이 유사한 변화 경향을 보였으며, 모세관수가 동일한 조건에서는, 기공률이 감소함에 따라 기공의 함량이 감소하였다.

• 한국농공학회지
• /
• 제45권1호
• /
• pp.45-54
• /
• 2003

The effects of binder content and silica sand content on the durability characteristics of lightweight polymer concretes are examined. As a result, the flame lingering times using unsaturated polyester resin and non-combustible polyester resin were 60∼120 and 0∼4 seconds respectively, and the combustion lengths were 9∼11 mm and 0∼3 mm, respectively. Thus it is believed that the lightweight polymer concrete was incombustible and the light weight polymer concrete in which non-combustible material was added was perfectly non-combustible. The percent of original mass of lightweight polymer concrete, according to the freezing-thawing experiment, was below 0.3 %, which was much less than that of cement concrete. The pluse velocity, for the case of the binder content 28 %, showed the minimum decreasing rate for the lightweight polymer concrete with silica sand content of 50 %. The higher the binder content, the greater the durability. That is much higher than other material and believed that the freezing-thawing was suppressed by a low absorption.

• 환경위생공학
• /
• 제17권1호
• /
• pp.63-68
• /
• 2002

질소 주입하에 스틸렌과 디비닐벤젠의 양을 조절하면서 1%, 2% 및 5%의 가교도를 가진 공중합체를 합성하고 여기에 염화아연을 첨가하였다. 벤젠을 넣고 팽윤 시킨 다음 톨루엔 용매에서 요드화 칼륨과 21.93g의 1-aza-15-crown-5를 가하고 $55^{\circ}C$로 30시간 교반 환류하여 중감속 이온을 흡착 할 수 있는 기능성 수지를 합성하였다. 이들 수지는 가교도가 증가할수록 디비닐벤젠 함량이 증가하여 다공도가 작아져서 염소의 함량이 감소되고 이것이 치환 과정에서 거대고리 리간드에 영향을 주어 질소의 함량도 감소되었다. 그리고 기능성 합성수지의 형태는 수소와 염소 원자의 치환 반응으로 찌그러짐을 볼 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.343-348
• /
• 1999

The purpose of this study is to evaluated the effects of added expanded polystyrene on the basic properties of UP mortar. Polyester resin mortars are prepared with expanded polystyrene ratio in styrene monomer (EPS/PS), and the ratio of total polystyrene resin to UP resin (PS/UP). And it is tested for viscosity of UP resin added PS resin, slump-flow test, working life, flexural and compressive strengths, and curing shrinkage test. From the test result, Viscosity of resin for polymer mortar increases with increasing PS content. Curing shrinkage of UP mortar is considerably smaller than that of plain UP mortar, nevertheless, reduction in the strengths is not recognized according to adding PS resin. In this study, we can obtain the optimum mix proportions of polymer mortar using PS resin.