• 대한치과의사협회지
• /
• 제53권7호
• /
• pp.468-475
• /
• 2015

Cleft 상악수술은 근본적으로 재발 성향을 가지며 Lefort I 후에 대부분 횡적으로 완전하게 안정되어 있지않고 움직임이 존재하므로 악간 고정기간을 통상적인 수술에서보다도 좀 더 충분히 두는 것이 좋다. 수술과 동시에, 추가적으로 비대칭적인 piriform aperture 나 alar base를 correction하기 위하여 골이식이 고려될 수 있으며 경우에 따라서는 조심스럽게 반흔조직을 절개해 주어야 하는 경우도 있다. Cleft 환자의 경우 상순이 얇고 수술에 의한 전방이동효과가 적기때문에 상악 수술시 이를 적극 고려하는 것이 필요하다. 또한 cleft 환자의 pterygomaxilla 부위의 해부학적 구조가 일반인과 차이가 있다는 것을 숙지하여 상악 수술에 임하는 것이 필요하다.

• Macromolecular Research
• /
• 제11권5호
• /
• pp.297-302
• /
• 2003

The imidization and cure reaction of a thermosetting phenylethynyl-terminated amic acid (LaRC PETI-5) in film form have been monitored as a function of temperature by means of a steady-state fluorescence technique using a front-face illumination method. The variation of the fluorescence emission spectra of LaRC PETI-5 can be divided into four temperature regions; Region I: below 15$0^{\circ}C$, Region II: 150-25$0^{\circ}C$, Region III: 250-35$0^{\circ}C$, and Region IV: above 35$0^{\circ}C$. The fluorescence spectra in Region I are largely influenced by residual N-methyl-2pyrrolidinone in the polymer and also slightly by partial imidization of the polymer. There is a combined effect of imidization and solvent removal on the fluorescence behavior in Region II. The spectra in Regions III and IV are due significantly to the cure reaction of LaRC PETI-5 and to a post-cure effect of the polyimide, respectively. This spectroscopic evidence indicating the transformation of the amic acid imide oligomer into the corresponding polyimide via imidization and cure, agrees well with thermal analysis results obtained previously. The intermediate stage of cure in the range of 250-30$0^{\circ}C$ predominantly influences the change of the fluorescence intensity. The later stage above 30$0^{\circ}C$ significantly influences the position of the spectrum. This fluorescence study also supports the mechanism proposed in earlier work that the crosslinking reaction takes place at the reaction sites in the conjugated polyene and the phenylethynyl end group in the polyimide chain.

• 대한의용생체공학회:의공학회지
• /
• 제18권3호
• /
• pp.223-231
• /
• 1997

본 논문에서는 3차원 의료 영상의 압축을 위한 인터프레임 부호화 방법을 제안한다. 슬라이스 사이의 변화를 뼈나 조직의 움직임으로 간주하여 움직임 보상 기법을 통해 이전 프레임으로부터 현재 프레임을 예측하고, 변환 부호화를 사용하여 오차 영상을 압축한다. 의료 영상의 슬라이스 사이의 복잡한 변화를 잘 예측하기 위해 동영상 부호화에서 가장 널리 사용되는 블럭 정합 알고리즘 (BMA) 대신 bilinear 변환을 통한 영상 warping을 사용하였다. 이 warping 방법은 슬라이스 사이에서 object가 없어지는 경우 예측 성능이 저하되는데, 이러한 단점을 보완하기 위해 블럭 겹침 움직임 보상 (OBMC) 기법을 결합하였다. 움직임 보상된 오차 영상의 부호화에는 EZW 부호화를 사용하였고, 이 때 각 프레임의 wavelet 계수의 양자화 오차를 동일하게 하여 프레임마다 일정한 화질을 얻도록 하였다. 모의 실험에서 warping을 사용한 인터프레임 부호화는 각 프레임을 독립적으로 부호화하는 방식보다 높은 압축 성능을 보였고, OBMC를 결합함으로써 warping만을 사용했을 때보다 성능이 더 개선되었다.

• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.342-356
• /
• 2016

Purpose: The drying of a thin layer of native cassava starch in a tray dryer was modeled to establish an equation for predicting the drying behavior under given conditions. Methods: Drying tests were performed using samples of native cassava starch over a temperature range of $40-60^{\circ}C$. We investigated the variation in the drying time, dynamic equilibrium moisture content, drying rate period, critical moisture content, and effective diffusivity of the starch with temperature. The starch diffusion coefficient and drying activation energy were determined. A modification of the model developed by Hii et al. was devised and tested alongside fourteen other models. Results: For starch with an initial moisture content of 82% (db), the drying time and dynamic equilibrium moisture content decreased as the temperature increased. The constant drying rate phase preceded the falling rate phase between $40-55^{\circ}C$. Drying at $60^{\circ}C$ occurred only in the falling rate phase. The critical moisture content was observed in the $40-55^{\circ}C$ range and increased with the temperature. The effective diffusivity of the starch increased as the drying temperature increased from 40 to $60^{\circ}C$. The modified Hii et al. model produced randomized residual plots, the highest $R^2$, and the lowest standard error of estimates. Conclusions: Drying time decreased linearly with an increase in the temperature, while the decrease in the moisture content was linear between $40-55^{\circ}C$. The constant drying rate phase occurred without any period of induction over a temperature range of $40-55^{\circ}C$ prior to the falling rate period, while drying at $60^{\circ}C$ took place only in the falling rate phase. The effective diffusivity had an Arrhenius relationship with the temperature. The modified Hii et al. model proved to be optimum for predicting the drying behavior of the starch in the tray dryer.

• Steel and Composite Structures
• /
• 제38권1호
• /
• pp.17-31
• /
• 2021

Post-earthquake fire is a common disaster which causes serious safety issues to infrastructures. This study aims to investigate the residual loading capacities of circular concrete-filled steel tube (CFST) columns under post-earthquake fire experimentally and numerically. The experimental programme contains two loading steps - pre-damage cyclic loading at room temperature and transient state tests with constant compression loads. Three finite element models are developed and validated against the test results. Upon validation, a total of 48 numerical results were generated in the parametric study to investigate the effects of thickness and strengths of steel tube, axial compression ratio and damage degree on the fire resistance of circular CFST columns. Based on the analysis on experimental and numerical results, the loading mechanism of circular CFST columns is discussed. A design method is proposed for the prediction of fire resistance time under different seismic pre-damage and compression loads. The predictions by the new method is compared with the newly generated experimental and numerical results and is found to be accurate and consistent with the mean value close to the unity and a coefficient of variation around 1%.

• 한국방재안전학회논문집
• /
• 제15권2호
• /
• pp.45-56
• /
• 2022

가뭄 및 갈수시에 용수부족 현상이 발생하나 회귀수량을 고려한 대응이나 대책 마련이 진행되지 않고 있다. 이에 본 연구에서 자료기반의 기계학습 모형(LSTM)을 통해 회귀수량 중 하수종말처리장의 방류량을 예측하였다. 입력자료로 방류량, 유입량, 강수량, 수위를 사용하였고 예측 결과의 정확도를 개선하기 위하여 추가적으로 입력변수의 변동성 분포를 고려하였다. 방류량 자료의 변동성을 확인하기 위해서 관측값과 분포 사이의 잔차를 복합삼각함수 형태로 가정하여 이론적인 확률분포와 함께 방류량 최적의 분포 형태로 나타내었다. 변동성 분포를 고려한 입력자료를 이용한 결과와 그렇지 않는 결과를 비교한 결과, 오차정도가 감소함을 보였으며 이는 변동성 분포가 계절성을 상대적으로 잘 재현하였기 때문이라 판단된다. 따라서 본 연구에서 구축한 하수종말장처리장의 방류량 예측 모형을 활용할 경우 보다 정확한 회귀수량 예측이 가능하여 효율적인 하천수 관리 체계를 수립하는데 기초자료로 활용될 수 있을 것으로 기대된다.

• 한국축산식품학회지
• /
• 제43권5호
• /
• pp.914-937
• /
• 2023

The objective of this study was to establish a multi-residue quantitative method for the analysis of anthelmintic and antiprotozoal drugs in various livestock products (beef, pork, and chicken) using ultra-high-performance liquid chromatography-tandem mass spectrometry. Each compound performed validation at three different levels i.e., 0.5, 1, and 2× the maximum residue limit according to the CODEX guidelines (CAC/GL 71-2009). This study was conducted according to the modified quick, easy, cheap, effective, rugged, and safe procedure. The matrix-matched calibrations gave correlation coefficients >0.98, and the obtained recoveries were in the range of 60.2%-119.9%, with coefficients of variation ≤32.0%. Furthermore, the detection and quantification limits of the method were in the ranges of 0.03-3.2 and 0.1-9.7 ㎍/kg, respectively. Moreover, a survey of residual anthelmintic and antiprotozoal drugs was also carried out in 30 samples of beef, pork, and chicken collected in Korea. Toltrazuril sulfone was detected in all three samples. Thus, our results indicated that the developed method is suitable for determining the anthelmintic and antiprotozoal drug contents in livestock products.

• 대한수의학회지
• /
• 제63권3호
• /
• pp.23.1-23.9
• /
• 2023

This study was conducted to investigate tiamulin (TML) residues in the edible tissues of orally dosed broiler chickens and to re-establish the withdrawal time (WT). Thirty-six healthy Ross broiler chickens were administered 0.5 (TML-1) and 2.5 kg (TML-2) per ton feed, respectively, of the drug containing TML 78 g/kg for 10 days. Twenty-four tissue samples were collected from 6 chickens in each of the TML-1 and TML-2 groups on 0, 1, 3, and 5 days after drug administration, respectively. The residual concentrations of TML were measured using liquid chromatography-tandem mass spectrometry (LC-MS/MS). The correlation coefficient of the calibration curves was 0.9978 to 0.9998, and the limits of detection and the limits of quantification (LOQ) were in the range of 0.03 to 0.06, and 0.1 to 0.2 ㎍/kg, respectively. Recoveries ranged between 89.0% to 116.7%, and the coefficients of variation were less than 13.9%. After the drug administration, TML in the TML-1 and TML-2 groups was detected above the LOQ in 1 and 6 samples of liver, respectively, at day 0, and in 1 liver sample from both groups on day one. At 3 days after administration, TML was detected below the LOQ in all samples of TML-1 and TML-2. The calculated WT of TML in both TML-1 and TML-2 using the WT calculation program WT 1.4 was 0 days. In conclusion, the developed analytical method is suitable for detection, and the calculated WT of TML in poultry edible tissues is shorter than the current recommended WT of 7 days for TML in broiler chickens.

• Design & Manufacturing
• /
• 제17권3호
• /
• pp.8-14
• /
• 2023

In this study, basic research was conducted on manufacturing technology of thick-walled light guide a component that controls the light source of automobile lamps. As a preliminary study for manufacturing the final injection molded parts, a model for analyzing the influence of micro patterns on light guides is presented. The optical characteristics of the light guide were analyzed according to the change of the curvature radius of the micro-optical pattern, and the injection molding characteristics of the light guide according to the change of injection molding conditions were analytically evaluated. It was confirmed that the luminance uniformity improves as the R value decreases for changes in the micro-pattern R value, but it was confirmed that there are technical limitations in actual injection mold core processing and high-replication injection molding. Injection molding analysis showed that cooling channel design is very important compared to general injection molding due to thick-wall characteristics and thickness variation. It was also confirmed that the cooling channel has a great influence on the cycle time and birefringence result due to residual stress. As a result of analyzing the influence of filling time, holding condition, and cooling on shrinkage, it was found that the cooling water temperature has a significant effect on the shrinkage of ultra-fine light guide parts, and the holding condition also has a significant effect.

• 농약과학회지
• /
• 제20권3호
• /
• pp.211-220
• /
• 2016

본 연구는 풋고추 시료를 이용하여 농약다성분 분석표준물질을 개발하기 위해 수행하였다. 10종의 농약성분을 풋고추 시료에 처리하여 균질하게 분포될 수 있도록 조제하였으며, 국제적인 지침서인 'ISO Guide 35', 'ISO Guide 13528' 그리고 'EURL-PT'에서 요구하는 균질성, 안정성, 인증값 및 표준불확도가 확립된 농약다성분 풋고추 분석표준물질을 개발하였다. 개발된 분석표준물질의 병간 표준편차와 병내 표준편차는 인증값의 1.7~3.7%로 매우 우수한 균질성을 나타냈으며, 불균질성에 의한 표준불확도는 인증값의 0.8~1.15% 매우 낮아 분석표준물질로 사용하기에 매우 적합하였다. 다양한 조건에서의 안정성을 확인한 결과, 실온 $20{\sim}30^{\circ}C$)에서는 7일, 냉동($-20^{\circ}C$)에서는 30일 동안 안정하였으며, 초저온 상태($-80^{\circ}C$)에서는 bifenthrin, Fenpropathrin을 제외한 8종이 245일 동안 안정하였다. 개발된 농약다성분 풋고추 분석표준물질을 사용하여 잔류농약을 분석하는 8기관의 시험소를 평가한 결과, 일부기관에서는 6성분을 검출하지 못하였으며 일부 농약성분에 대해서는 의심스러운(questionable) 또는 부적합(unacceptable)의 평가를 받았다. 동일한 분석표준물질에 대해서 각 기관마다 분석결과의 차이가 나타나는 것을 확인하였으며, 이런 결과를 통해서 잔류농약의 분석결과 신뢰성과 일관성을 향상시키기 위해 풋고추 분석표물질을 활용한 정도관리 또는 숙련도 평가시험이 필요할 것으로 보인다.