• 제목/요약/키워드: residual set

검색결과 327건 처리시간 0.022초

초동 주시 측정 오차로 제어된 공대공 주시 토모그래피 사례연구 (A Case Study on the Cross-Well Travel-Time Tomography Regulated by the Error in the Measurement of the First Arrival Time)

  • 이두성
    • 지구물리와물리탐사
    • /
    • 제12권3호
    • /
    • pp.233-238
    • /
    • 2009
  • 시추공 주시 토모그래피의 주요 요소 중 하나인 초동주시의 측정오차 정보를 사용한 주시 토모그래피 법을 제안하고, 이 역산 방법을 실제 시추공 탐사 자료에 적용하는 실험을 수행 하였다. 제안된 역산방법은 2단계 제어 처리 공정이다. 1) 성취하고자하는 속도 영상의 분해능에 기초하여 측정 주시의 허용 오차한계를 설정하고 측정오차가 오차한계 이상인 기록은 역산에서 제외한다. 2) 반복역산 과정에서 계산된 주시 차 중에서 해당기록의 측정오차 보다 작은 주시 차를 0(영) 처리함으로써 무의미한 수치가 누적되어 속도 개선에 기여함을 방지한다. 모든 기록을 사용한 속도영상과 제어역산으로 도출한 속도영상을 비교한 결과에 의하면, 제어 역산으로 도출한 속도영상에서 수치잡음이 상대적으로 적게 표출되었다. 그리고 Fermat 원리에 의하면, 이 영상이 보다 현실가능성이 높은 속도모델임을 확인하였다.

적응 다중 안테나 Bit-Interleaved Coded OFDM 시스템을 위한 향상된 Bit-Loading 기법 (Enhanced Bit-Loading Techniques for Adaptive MIMO Bit-Interleaved Coded OFDM Systems)

  • 조정호;성창경;문성현;이인규
    • 대한전자공학회논문지TC
    • /
    • 제46권2호
    • /
    • pp.18-26
    • /
    • 2009
  • 송신단에서 채널 상태 정보를 알 수 있는 경우, 적응 알고리즘을 통한 전송 및 다중사용자 스케줄링을 통해 시스템 전송률을 향상시킬 수 있다. 본 논문에서는 비트 인터리버와 결합한 부호화된 직교 주파수 다중 분할 (BIC-OFDM; Bit-Interleaved Coded Orthogonal frequency Division Multiplexing) 기법을 기반으로 하는 다중안테나 (MIMO; Multiple-Input Multiple Output) 시스템을 고려한다. 먼저 Levin-Campello 알고리즘을 개선한 비트 로딩 (bit-loading) 기법을 제안하고, 이를 다중안테나 시스템으로 확장하여 한정된 개수의 신호 성상을 사용하는 데 따르는 잔여 파워 문제를 극복하는 알고리즘을 제시한다. 실험 결과는 제안하는 기법이 시스템 성능을 개선시키며 특히 높은 신호 대 잡음비 (SNR; Signal-to-Noise Ratio) 영역에서 기존의 기법에 비하여 큰 성능 이득을 제공함을 보여준다.

Gender Differences in the Sensitivity and Displeasure Caused by the Vibration Stimuli Applied to the Forearm in Upper Limb Amputees

  • Kim, Sol Bi;Ko, Chang-Yong;Chang, Yun Hee;Kim, Gyoo Suk;Kim, Sin Ki
    • 대한인간공학회지
    • /
    • 제32권4호
    • /
    • pp.355-361
    • /
    • 2013
  • Objective: The aim of this study is to investigate the gender-differences in vibrotactile responses(sensitivity and displeasure) of residual forearm simulated by vibration stimulation in upper limb(trans-radial) amputees. Background: Several studies have reported that vibration stimulation using the haptic vibrator is one the most effective methods for delivering sensation to an amputees. However, few studies have reported the perception to haptic vibratory stimulus, particularly sensitivity and displeasure. Method: We set up a custom-made vibration stimulation system that included 6 actuators(3 medial parts and 3 lateral parts) and a graphical user interface(GUI)-based acquisition system to investigate changes in residual somatosensory sensibility and displeasure in the forearm of upper limb(trans-radial) amputees. Vibration actuators were attached at the 25%-point on the proximal forearm. Stimulation with 32Hz, 64Hz, or 149Hz of frequency was used for the sensitivity tests and with 32~257Hz of frequency was used for the discomfort experiments. The subjective responses were evaluated on a 10 point scale. Results: The results showed that vibrotactile sensory perception in male amputees were higher than that in female amputees. In male amputees, the response at lateral area of forearm was the most sensitive than medial area; but, female amputees showed similar sensitive areas. Subjects did not experience any discomfort during vibrotactile stimuli. Conclusion: Vibrotactile response in the amputees was dependent on gender as well as area stimulated by vibration. Application: The results might contribute to develop the vibrotactile feedback system for the amputees.

병렬OMP 기법을 통한 성긴신호 복원과 그 성능 (Sparse Signal Recovery with Parallel Orthogonal Matching Pursuit and Its Performances)

  • 박정홍;정방철;김종민;반태원
    • 한국정보통신학회논문지
    • /
    • 제17권8호
    • /
    • pp.1784-1789
    • /
    • 2013
  • 본 논문에서는 성긴 신호의 복원을 위하여 기존의 직교매칭퍼슛 (orthogonal matching pursuit, OMP) 기술을 보완한 Parallel OMP (POMP) 기법을 제안하고 성능을 분석한다. POMP알고리즘의 과정은 간단하지만 기존 OMP와 비교하여 더 좋은 성능을 보이는 알고리즘이다. POMP 는 첫 번째 반복 과정에서 관찰 행렬과 상관도가 높은 인덱스 집합을 여러 개 선택한다. 선택된 각각의 인덱스를 첫 번째 인덱스로 하는 각각의 POMP 블록에서 OMP 알고리즘 기법이 병렬적으로 동작한다. 마지막으로 신호 복원을 위해 가장 작은 잔류 오차(residual)를 갖는 POMP블록의 인덱스 집합을 선택한다. 컴퓨터 시뮬레이션을 통해 제안된 POMP가 기존의 신호 복원 기술에 비하여 완벽복원비율과 평균 제곱 오차 (MSE) 측면에서 좋은 성능을 보임을 확인하였고, 이미지복원에 있어서는 눈으로 확인 가능할 정도의 성능 개선을 확인하였다.

Calculation of preliminary site-specific DCGLs for nuclear power plant decommissioning using hybrid scenarios

  • Seo, Hyung-Woo;Sohn, Wook
    • Nuclear Engineering and Technology
    • /
    • 제51권4호
    • /
    • pp.1098-1108
    • /
    • 2019
  • Korea's first commercial nuclear power plant at Kori site was permanently shut down in 2017 and is currently in transition stage. Preparatory activities for decommissioning such as historical site assessment, characterization, and dismantling design are being actively carried out for successful D&D (Dismantling and Decontamination) at Kori site. The ultimate goal of decommissioning will be to ensure the safety of workers and residents that may arise during the decommissioning of nuclear facilities and, thereby finally returning the site to its original status in accordance with the release criteria. Upon completion of decommissioning, the resident's safety at a site released will be assessed from the evaluation of dose caused by radionuclides expected to be present or detected at the site. Although the U.S. commercial nuclear power plants with decommissioning experience use different site release criteria, most of them are 0.25 mSv/y. In Korea, both the unrestricted and restricted release criteria have been set to 0.1 mSv/y by the Nuclear Safety and Security Commission. However, since the dose is difficult to measure, measurable concentration guideline levels for residual radionuclides that result in dose equivalent to the site release criteria should be derived. For this derivation, site reuse scenario, selection of potential radionuclides, and systematic methodology should be developed in planning stage of Kori site decommissioning. In this paper, for calculation of a preliminary site-specific Derived Concentration Guideline Levels (DCGLs) for the Nuclear Power Plant site, a novel approach has been developed which can fully reflect practical reuse plans of the Kori site by taking into account multiple site reuse scenarios sequentially, thereby striking a remarkable distinction with conventional approaches which considers only a single site scenario.

임의 차원 데이터 대응 Dynamic RNN-CNN 멀웨어 분류기 (Dynamic RNN-CNN malware classifier correspond with Random Dimension Input Data)

  • 임근영;조영복
    • 한국정보통신학회논문지
    • /
    • 제23권5호
    • /
    • pp.533-539
    • /
    • 2019
  • 본 연구는 본 연구는 Microsoft Malware Classification Challenge 데이터 셋을 사용해 임의의 길이 입력 데이터에 대응할 수 있는 멀웨어 분류 모델을 제안한다. 우리는 기존 연구의 멜웨어 데이터를 이미지화 시키는 것을 기반으로 한다. 제안 모델은 멀웨어 데이터가 큰 경우는 많은 이미지를 생성하고, 작은 데이터는 적은 이미지를 생성한다. 생성된 이미지를 시계열 데이터로 Dynamic RNN으로 학습시킨다. RNN의 출력 값은 Attention 기법을 응용해 가장 가중치가 높은 출력만 사용하고, RNN 출력값을 다시 Residual CNN으로 학습시켜 최종적으로 멀웨어를 분류한다. 제안모델을 실험한 결과 검증 데이터 셋에서 Micro-average F1 score 92%를 기록하였다. 실험 결과 특별한 특징 추출 및 차원 축소 없이 임의 길이의 데이터를 학습 및 분류할 수 있는 모델의 성능을 검증할 수 있었다.

Deriving the Effective Atomic Number with a Dual-Energy Image Set Acquired by the Big Bore CT Simulator

  • Jung, Seongmoon;Kim, Bitbyeol;Kim, Jung-in;Park, Jong Min;Choi, Chang Heon
    • Journal of Radiation Protection and Research
    • /
    • 제45권4호
    • /
    • pp.171-177
    • /
    • 2020
  • Background: This study aims to determine the effective atomic number (Zeff) from dual-energy image sets obtained using a conventional computed tomography (CT) simulator. The estimated Zeff can be used for deriving the stopping power and material decomposition of CT images, thereby improving dose calculations in radiation therapy. Materials and Methods: An electron-density phantom was scanned using Philips Brilliance CT Big Bore at 80 and 140 kVp. The estimated Zeff values were compared with those obtained using the calibration phantom by applying the Rutherford, Schneider, and Joshi methods. The fitting parameters were optimized using the nonlinear least squares regression algorithm. The fitting curve and mass attenuation data were obtained from the National Institute of Standards and Technology. The fitting parameters obtained from stopping power and material decomposition of CT images, were validated by estimating the residual errors between the reference and calculated Zeff values. Next, the calculation accuracy of Zeff was evaluated by comparing the calculated values with the reference Zeff values of insert plugs. The exposure levels of patients under additional CT scanning at 80, 120, and 140 kVp were evaluated by measuring the weighted CT dose index (CTDIw). Results and Discussion: The residual errors of the fitting parameters were lower than 2%. The best and worst Zeff values were obtained using the Schneider and Joshi methods, respectively. The maximum differences between the reference and calculated values were 11.3% (for lung during inhalation), 4.7% (for adipose tissue), and 9.8% (for lung during inhalation) when applying the Rutherford, Schneider, and Joshi methods, respectively. Under dual-energy scanning (80 and 140 kVp), the patient exposure level was approximately twice that in general single-energy scanning (120 kVp). Conclusion: Zeff was calculated from two image sets scanned by conventional single-energy CT simulator. The results obtained using three different methods were compared. The Zeff calculation based on single-energy exhibited appropriate feasibility.

치자(梔子)의 규격 기준 모니터링 및 HPLC 표준크로마토그램 연구 (Quality Monitoring of Specification Standard of Gardeniae Fructus in the Korean Pharmacopoeia and Studies HPLC Standard Chromatogram)

  • 김경희;김선미;신승훈;이영종;백완숙
    • 대한본초학회지
    • /
    • 제32권2호
    • /
    • pp.97-105
    • /
    • 2017
  • Objectives : Gardeniae Fructus is a ripe fruit of Gardenia jasminoides Ellis, which has been used as traditional medicines for anti-inflammatory, diuretic, antipyretic, and antibacterial activity. The aim of this study was to compare of Gardeniae Fructus in South Korea collected during three years according to the standards in monographs of the Korean Pharmacopoeia Eleventh edition (KP11). Methods : 30 items of Gardeniae Fructus from two cultivation regions were classified into dried(n=15) & steamed (n=15) and tested according to the standards in monographs of the KP11. Gardeniae Fructus was carried out identification(comparison of colors, thin layer chromatography), heavy metals, residual pesticides, total ash, and assay registered at KP11. Add to we tested loss on dry, contents of ethanol-soluble extracts, and HPLC profiling. Results : In TLC chromatogram of identification test, the spot of gardenoside and geniposide were observed at $R_f$ value of about 0.3 and 0.5. Heavy metals and residual pesticides met the requirements of the standards for all samples. The results of total ash of each samples are measured maximum 4.87 %. According to HPLC for assay, the samples contain 4.80~6.10 % of geniposide and 0.45~1.83 % of gardenoside. Conclusion : We have verified the current specification standard of Gardeniae Fructus and standard that is not set. By the results, it is proposed a new draft of loss on drying and confirmed the content of gardenoside revised. HPLC standard chromatogram of Gardeniae Fructus is proposed. We hope that it will help the standardization of Gardeniae Fructus.

Effectiveness of endodontic retreatment using WaveOne Primary files in reciprocating and rotary motions

  • Patricia Marton Costa;Renata Maira de Souza Leal;Guilherme Hiroshi Yamanari;Bruno Cavalini Cavenago;Marco Antonio Hungaro Duarte
    • Restorative Dentistry and Endodontics
    • /
    • 제48권2호
    • /
    • pp.15.1-15.7
    • /
    • 2023
  • Objectives: This study evaluated the efficiency of WaveOne Primary files (Dentsply Sirona) for removing root canal fillings with 2 types of movement: reciprocating (RCP) and continuous counterclockwise rotation (CCR). Materials and Methods: Twenty mandibular incisors were prepared with a RCP instrument (25.08) and filled using the Tagger hybrid obturation technique. The teeth were retreated with a WaveOne Primary file and randomly allocated to 2 experimental retreatment groups (n = 10) according to movement type: RCP and CCR. The root canals were emptied of filling material in the first 3 steps of insertion, until reaching the working length. The timing of retreatment and procedure errors were recorded for all samples. The specimens were scanned before and after the retreatment procedure with micro-computed tomography to calculate the percentage and volume (mm3) of the residual filling material. The results were statistically evaluated using paired and independent t-tests, with a significance level set at 5%. Results: No significant difference was found in the timing of filling removal between the groups, with a mean of 322 seconds (RCP) and 327 seconds (CCR) (p < 0.05). There were 6 instrument fractures: 1 in a RCP motion file and 5 in continuous rotation files. The volumes of residual filling material were similar (9.94% for RCP and 15.94% for CCR; p > 0.05). Conclusions: The WaveOne Primary files used in retreatment performed similarly in both RCP and CCR movements. Neither movement type completely removed the obturation material, but the RCP movement provided greater safety.

인체 팬텀(Rando Phantom)을 이용한 CBCT의 Setup 유용성 평가 (Evaluation of Setup Usefulness of CBCT using Rando Phantom)

  • 장은성
    • 한국콘텐츠학회논문지
    • /
    • 제11권7호
    • /
    • pp.234-238
    • /
    • 2011
  • 온보드영상장치(OBI)를 사용하고 있는 콘빔CT(CBCT)를 이용하여 인체 팬텀 자세 및 위치와 모의치료시 인체 팬텀 자세 및 위치를 비교하여 CBCT의 3D 타깃 위치의 유용성을 평가하고자 한다. 실제방사선 치료와 동일한 과정으로 모의 치료계획을 하기 위해서 인체 팬텀(The Rando Phantom) 을 set up 한다. 기준점에 놓인 인체팬텀에서 CBCT를 이용하여 평행이동 및 회전이동 하였다. 이때 얻어진 영상들의 위치 차이에 대한 평균 및 편차를 인체 팬텀의 실제 이동 값과 비교하였다. 실험은 10회씩 반복하여 오차의 표준 편차를 구하였다. CBCT로 획득한 영상과 모의치료 시 획득한 CT영상을 비교하는 3D/3D 매칭에서 평균 setup의 residual error의 평균 및 표준편차는 lateral $0.2{\pm}-0.2$ mm, longitudinal $0.4{\pm}0.3$ mm, vertical $-0.4{\pm}0.1$ mm 로 각각 0~4 mm의 범위 이내로 나타났다. 모의실험 된 회전 내용은 $0.4{\pm}0.2$ mm, $0.3{\pm}0.3$ mm, 그리고 $0.3{\pm}0.4$ mm이다. 회전에 의한 error는 $0{\sim}0.6^{\circ}$ 범위이다. 인체 팬텀을 이용한 CBCT 3D/3D 매칭은 모의 치료 시와 환자 치료 시 정확한 정합을 함으로써 error를 최소화 하였다.