• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.6
• /
• pp.39-48
• /
• 2004

The purpose of this paper was to confirm the application of the equation of the soil-water characteristic curve on an unsaturated soil. To this ends, a series of suction test was conducted on the selected 4 kinds of soil which is located in Korea, using the modified pressure extractor apparatus. And it was carried out to analyze the experimental parameters which can describe the soil-water characteristics, were determined by using the data obtained from the experiment. From the results, it was found that the matric suction was varied according to the grain size distribution, amount of fine grain particle and void ratio. Also it was found that the residual volumetric water content was decreased with the void ratio, but the index related air entry value, the soil parameter related water content and the parameter with residual water content were increased with the void ratio. And the application of equation of the soil-water characteristic curve was confirmed for the various conditions and the various state by the comparison between the volumetric water content measured by the experiment and the predicted values.

• Journal of Environmental Science International
• /
• v.6 no.5
• /
• pp.521-529
• /
• 1997

In the study, we Investigated the behavior and removal efficiency of organics, nitrogen. phosphorus with operating conditions in SBRs. Substrate used was synthetic wastewater in which the ratio of $COD_{cr}$. : N : P was 100 : 12 : 2. The cycling the in SBRs was adjusted at 6 hours and 8 hours, and then certainly Included anaerobic and aerobic conditions. Also, for each cycling time. we performed 2 series of experiment simultaneously which was set up 10 days and 20 days as SRT. The removal efficiency of $COD_{cr}$. was over 97% in all operating conditions. In the 6 hours cycling time, the removal efficiency of $PO_4^{3-}-P$ reached almost 100% in steady state. And then we could observe a typical phonemena of phosphorus release and uptake, and the removal efficiency of N was 67%, Residual N source was almost TKN and most of the rest remained as $NO_2-N$. Also the difference in both SRTs was not observed practically. In the 8 hours cycling time, dissolution of sludge appeared. and, $PO_4^{3-}-P was not nearly removed but nitrogen was removed up to 75%, And the residual nitrogen was accumulated as $NO_2^--N$.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.2
• /
• pp.109-118
• /
• 2013

We propose a method for estimating coefficients of AR (autoregressive) model which named MLPAR (Maximum Likelihood of Pearson system for Auto-Regressive model). In the present method for estimating coefficients of AR model, there is an assumption that residual or error term of the model follows the normal distribution. In common cases, we can observe that the error of AR model does not follow the normal distribution. So the normal assumption will cause decreasing prediction accuracy of AR model. In the paper, we propose the MLPAR which does not assume the normal distribution of error term. The MLPAR estimates coefficients of auto-regressive model and distribution moments of residual by using pearson distribution system and maximum likelihood estimation. Comparing proposed method to auto-regressive model, results are shown to verify improved performance of the MLPAR in terms of prediction accuracy.

• Steel and Composite Structures
• /
• v.23 no.3
• /
• pp.285-302
• /
• 2017

Buckling-restrained braced frames (BRBFs) are commonly used as the lateral force-resisting systems in building structures in the seismic regions. The nearly-symmetric hysteretic response and the delayed brace core fracture of buckling-restrained braces (BRBs) under the axial cyclic loading provide the adequate lateral force and deformation capacity to BRBFs under the earthquake excitation. However, the smaller axial stiffness of BRBs result in the undesirable higher residual drift response of BRBFs in the post-earthquake scenario. Two alternative approaches are investigated in this study to improve the elastic axial stiffness of BRBs, namely, (i) by shortening the yielding cores of BRBs; and (ii) by reducing the BRB assemblies and adding the elastic brace segments in series. In order to obtain the limiting yielding core lengths of BRBs, a modified approach based on Coffin-Manson relationship and the higher mode compression buckling criteria has been proposed in this study. Both non-linear static and dynamic analyses are carried out to analytically evaluate the seismic response of BRBFs fitted with short-core BRBs of two medium-rise building frames. Analysis results showed that the proposed brace systems are effective in reducing the inter-story and residual drift response of braced frames without any significant change in the story shear and the displacement ductility demands.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.445-454
• /
• 2006

Myungji Housing Complex is located in the Nakdong River plain in which the Busan soft clays are developed. It has thick soft soil laver of about GL(-)50m including loose sandy layers, upper and lower clayey layers. The clayey layers have been being consolidated since the land reclamation was completed to build the place for Housing Complex(Apartment) in 1997. Therefore, as one of a series of advance preparations of this project, study was carried on the geotechnical characteristics under the foundation The first part of this paper represents a brief geological history. Then, geotechnical characteristics of clay was analyzed in the classical developments in soft clay. They were based on the geotechnical data obtained by site investigations performed from 1992 to 2005. Finally, we evaluated the average degree of consolidation at this point in time and the residual settlements of upper clayey layer using dissipation and oedometer tests for this project

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.6
• /
• pp.7-16
• /
• 1984

This paper describes the overall procedure of the development of a digital audio response system. It has been developed specifically as an answering system to the inquiries of telephone numbers from subscribers. The system has been realized based on the residual excited linear prediction (RELP) algorithm that incorporates a pitch predictive loop. Its major advantage over other similar systems is that it produces high quality of synthetic speech, although its memory size is relatively small. The hardware which consists of a speech synthesizer, a controller and an I/O part has been constructed using 2900 series bit-slice microprocessors and an INTEL 8085 microprocessor. The system is capable of real time processing, reliable, and adaptable to other applications.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.329-336
• /
• 2001

In this study, a series of fatigue tests are carried out in order to estimate quantitatively the characteristics of fatigue crack growth rate for high strength steels of SM570, POSTEN60, and POSTEN80 steel, that is, the influence on fatigue crack growth rate according to the welding line, the characteristics of fatigue crack growth according to the welding method and the kinds of steel, and the characteristics of fatigue crack growth for base metal, heat affected zone and weld metal. From the test results, in case that the notch if parallel to welding line, it knows that the retardations of fatigue crack growth rate in crack tip at early stage increase remarkably than in case that the notch is perpendicular to welding line due to compressive residual stress. And the characteristics of fatigue crack growth rate according to welding method are that the dispersion of fatigue crack growth rate in case of FCAW method is smaller than that of SAW method. Also, it knows that the fatigue crack growth rate converges in high stress intensity factor range.

• Korean Journal of Materials Research
• /
• v.11 no.10
• /
• pp.863-868
• /
• 2001

The present study was carried out to investigate the effect of MA processing variables on the microstructural properties of composite powders and the coefficient of thermal expansion of pulse electric current sintered AlN-Cu powder compacts. The AlN-Cu powders had a size of less than 15 $\mu\textrm{m}$ with 25 nm size of copper crystallite after MA 32 hours. The finely distributed AlN-Cu powder compacts were completely achieved after PECS. The residual oxygen was considerably removed after hydrogen reduction treatment. The residual carbon was completely removed to 97%. The CTE of AlN-Cu powder compacts showed a good consistency with Kingery-Tuner model when the volume fraction of copper was less than 60%. When it was more than 60%, the CTE had a good agreement with Series model.

• Clinics in Shoulder and Elbow
• /
• v.18 no.1
• /
• pp.8-12
• /
• 2015

Background: The aim of this study was to assess demographics, clinical outcomes, and complications of classic floating elbow in adults. Methods: Six patients with ipsilateral diaphyseal fractures of the humerus, radius, and ulna were reviewed retrospectively. All patients were treated operatively and available for follow-up at a minimum of 1 year after surgery. The average age of the patients was 45.2 years (22-64 years) and the average follow-up period was 37.0 months (14-103 months). They were evaluated with postoperative outcome measures, including a visual analog scale (VAS) for pain, Mayo elbow performance score (MEPS), and American Shoulder and Elbow Surgeons (ASES) shoulder score. Residual complications were also evaluated. Results: Five patients (83.3%) had open fracture, and 4 patients (66.7%) presented with associated nerve injury. All fractures were united within postoperative 4 months, except 1 delayed union. The average VAS pain score, MEPS, and ASES shoulder score at the final follow-up examination was 2.5, 79.8, and 67.5 respectively. Three patients including 2 cases of joint stiffness with incomplete recovery from nerve injury and 1 case of complex regional pain syndrome had poor clinical outcome. Conclusions: Although the classic floating elbow is rare, these injuries potentially have associated problems such as open fracture or nerve injury. The presence of residual neurological symptoms predispose to poorer clinical outcomes.

• Journal of Chest Surgery
• /
• v.14 no.3
• /
• pp.187-194
• /
• 1981

Cardiac surgery is generally followed by a period of routine ventilator support. When the patient seems hemodynamically stable and relatively alert following surgery, respiratory adequacy is tested by the weaning trial. In this study, physiological and clinical prediction of postoperative respiratory adequacy, including values of pulmonary function tests, were examined in an attempt to identity those few variables which predicted the outcome of the ventilator weaning trial following surgery. Our series comprised 27 patients who underwent elective open intracardiac operations at the Department of Thoracic and Cardiovascular Surgery, School of Medicine, Kyungpook National University, from October 1979 to July, 1980. The pulmonary function tests performed on all patients included the following; forced vital capacity [FVC], forced expiratory volume [FEV1.0], forced expiratory flow [FEF 25--75~], residual volume [RV], and functional residual capacity [FRC], measured with a helium dilution technique. Of our 27 patients, 8 were successfully weaned within 20 hours of operation. All patients with cyanotic heart diseases or acquired heart diseases were unsuccessfully weaned. The bypass time in the successful weaning group was shorter in the mean value [82.8 minutes]than in the unsuccessful weaning group [120.5 minutes]. There was a relatively significant difference in the mean values for the two groups in arterial pressure, bleeding amounts and FiO2 among the postoperative monitoring variables, and in forced vital capacity [FVC]. The postoperative clinical assessments appeared vague but corresponded reasonably well to appraisal of success in weaning, especially in variables of cough and self-respiration efforts.