• 한국안전학회지
• /
• 제8권2호
• /
• pp.64-71
• /
• 1993

In this study, the purpose is to investigate the influence of initial residual stresses on the fatigue crack growth behaviors after the distribution of initial residual stresses Is measured when the crack is growing from the compressive residual stresses field to the tensile residual stress field. Also, the Influence of the variation of residual stress distribution on the fatigue crack growth behaviors at the crack tip is studied when the initial crack li applied on base metal, weld metal and HAZ respectively.

• 자동차안전학회지
• /
• 제12권4호
• /
• pp.54-60
• /
• 2020

In a previous study, an investigation of occupant behaviors and injuries (to the head and chest) was performed during vehicle impact loading cases in order to ensure the safety of wheelchair passengers on a bus. The computational results showed overall safety tolerances of wheelchair occupants under different accident configurations. The bus crashworthiness is described as the capability of a bus to protect occupants during rollover loadings. The residual space containing occupants should be undamaged without any intrusions. However it is necessary to evaluate the residual space according to the bus occupant kinematic analysis under the rollover crash simulation. This study focuses on the evaluation of occupant behaviors during rollover loading cases in order to ensure the safety of bus passengers sitting in general seats and wheelchairs and evaluates the residual space of the bus by analyzing the bus occupant kinematics.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1451-1469
• /
• 2019

This paper proposes a residual stress mitigation of a nuclear safety-related austenitic stainless steel TP304 pipe bended by local induction heating process via performing elastic-plastic finite element analysis. Residual stress distributions of the pipe bend were calculated by performing finite element analysis. Validity of the finite element analysis procedure was verified via comparing with temperature histories measured by using thermocouples, ultrasonic thickness measurement results, and residual stress measurement results by a hole-drilling method. Parametric finite element stress analysis was performed to investigate effects of the process and geometric shape variables on the residual stresses on inner surfaces of the pipe by applying the verified procedure. As a result of the parametric analysis, it was found that it is difficult to considerably reduce the inner surface residual stresses by changing the existing process and geometric shape variables. So, in order to mitigate the residual stresses, effect of an additional process such as cooling after the bending on the residual stresses was investigated. Finally, it was identified that the additional heating after the bending can significantly reduce the residual stresses while other variables have insignificant effect.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.8-13
• /
• 2004

The purpose of this paper is to investigate the welding residual stress distribution according to the constraint or non-constraint welding condition with titanium commonly using power station, aircraft, and ship. The measuring method of the residual stress was applied stress release rating method with strain gages and a potable strain meter. The x direction residual stress generally showed the tensile residual stress in case of res03int welding. On the other hand, the x direction residual stress under non-restraint welding were changed tensile stress into compressive stress on 15mm away from welding bead center. Also, the y direction residual stress generally showed the tensile residual stress in case of non-restraint welding and the y direction residual stress under restraint welding were changed tensile stress into compressive stress about 60mm away from welding bead center.

• 한국강구조학회 논문집
• /
• 제9권1호통권30호
• /
• pp.51-63
• /
• 1997

Highly curved steel-box bridges are usually constructed as ramp structures for the highway interchange and metropolitan elevated highway junction, but a number of these bridges are deteriorated and damaged to a significant degree due to heavy traffic. The main objective of the study is to develop a practical reliability-based assessment of safety and residual load carrying-capacity of existing curved steel-box ramp bridges. In the paper, for the realistic assessment of safety and residual load carrying-capacity of deteriorated and/or damaged curved steel-box bridges, an interactive non-linear limit state model is formulated based on the von Mises's combined stress yield criterion. It is demonstrated that the proposed model is effective for the assessment of reliability-based safety and the evaluation of residual load carrying-capacity of curved steel-box bridges. In addition, this study comparatively shows the applicability of various reliability analysis methods, and suggests a practical and effective one to be used in practice.

• International Journal of Safety
• /
• 제7권2호
• /
• pp.27-30
• /
• 2008

In the 21st century, safety issues in the strained silicon industry, such as dislocation injection, should be carefully considered. This is because a microelectronic device usually contains sharp features (e.g., edges and corners) that may intensify stresses, inject dislocations into silicon, and ultimately cause the failure of the device. In this paper, critical residual stresses in various strained structures are calculated. It is confirmed that this model correctly predicts trends and the order of magnitude of critical residual stresses.

• 한국안전학회지
• /
• 제12권3호
• /
• pp.30-37
• /
• 1997

This paper deals with the residual stress of carburized spur gears is calculated being on the assumption that the main cause of residual stress is the volume difference between case and core due to the martensitic transformation in cooling. A formula is proposed to estimated the residual stress from the hardness and the amount of retained austenite. The estimated residual stress is close to the stress measured by X-ray method. The estimated residual stress is applied to the analysis of the fracture mechanics of carburized spur gear teeth. The stress intensity factor due to the residual stress is demonstrated. The stress intensity factor is computed by the influence function method, and it is shown that the factor is decreased by the residual stress in Carburized gear tooth.

• 한국안전학회지
• /
• 제24권1호
• /
• pp.7-13
• /
• 2009

The objective of this study is to design a laboratory specimen for simulating residual stress of circumferential butt welding between pipes. Specimen type and method to generate residual stress were proposed based on the review of prior studies and parametric finite element analysis. To prove the proposed specimen type and loading method, the residual stress was generated using the designed specimen by applying proposed method and was measured. The measured residual stress using X-ray diffraction reasonably agreed with the results of finite element analysis considered in the specimen design. Comparison of residual strains measured at several locations on the specimen and given by finite element simulation also showed good agreement. Therefore, it is indicated that the designed specimen in this study can reasonably simulate the axial residual stress of a circumferential butt welding of pipe.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.7-13
• /
• 2001

Wire electrical discharge machining experiments in conducted to investigate characteristics of acoustic emission (AE) and electrical discharge energy due to current peak (I$_{p}$), pulse on time($\tau$/on/). The AE signals are obtained with a sensor attached to workpiece side. Machining states are identified with scanning electron microscopy and residual stress analyzer. It is demonstrated that the residual stress provide reliable informations about the machining states. Moreover, machining states can be detected successfully using both the residual stress and AE count rate.e.

• 한국안전학회지
• /
• 제22권1호
• /
• pp.19-23
• /
• 2007

The aim of this study was to determine residual stresses in thermal barrier coatings(TBCs) by isothermal heating. Specimens were heated at the range of $1000{\sim}1600^{\circ}C$. A finite element method was used to determine the residual stresses. Finite element coupled heat transfer and elastic-plastic thermal stress analysis using a general purpose commercial FEM software ABAQUS. I obtained the stresses were not affected below the temperature of $1400^{\circ}C$ but affected over that of temperature.