• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.83-90
• /
• 2004

In this study, CT specimens were prepared from spring steel(SUP9) processed shot peening which was room temperature and low temperature experiment. And we got the following characteristics from fatigue crack growth test carried out in the environment of room temperature and low temperature at $25^{\circ}C$, $-30^{\circ}C$, $-50^{\circ}C$, $-70^{\circ}C$,$-100^{\circ}C$, and $-150^{\circ}C$, in the range of stress ratio of 0.05 by means of opening mode displacement. The threshold stress intensity factor range ΔKth in the early stage of fatigue crack growth (Region I)was increased but stress intensity factor range ΔK in the stable of fatigue crack growth (Region II) was decreased in proportion to decrease temperature. It is assumed that the fatigue resistance characteristics and fracture strength at low temperature and high temperature is considerably higher than that of room temperature in the early stage and stable of fatigue crack growth region.

• 한국안전학회지
• /
• 제18권3호
• /
• pp.1-7
• /
• 2003

In this study, CT specimens were prepared from spring steel(SPS5) processed shot peening. The fatigue crack growth tests were carried out in the environment of the room temperature md low temperature at $25^{\circ}C$, $-30^{\circ}C$, $-50^{\circ}C$, $-70^{\circ}C$ $-100^{\circ}C$ and $-150^{\circ}C$ in the range of stress ratio of 0.05 by means of opening mode displacement. The threshold stress intensity factor range ΔKth in the early stage of fatigue crack growth (Region I) and stress intensity factor range $\Delta$K in the stable of fatigue crack growth (Region II) were decreased in proportion to descend temperature. It was shown that the fatigue resistance characteristics and fracture strength at low temperature are considerable higher than those of mom temperature in the early stage and stable of fatigue crack growth region.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권5호
• /
• pp.23-31
• /
• 2010

For an efficient remediation of Pb-contaminated soil (S-1) in a clay shooting range, a soil washing test was performed with mineral acid, organic acid, chelating agent, and chloride. The Pb extraction efficiency of extractant (0.1 M) used in the washing test showed the order of HCl > $Na_2$-EDTA > NTA > DTPA > citric acid > malic acid > succinic acid > acetic acid > $CaCl_2$ > $MgCl_2$, for S-1 soil. As compared to initial Pb concentration, extraction efficiency by the concentration of extractant was 93.35%, 80.80%, 73.92%, and 24.57% in S-1 soil for HCl (0.5 M, pH 1.10), $Na_2$-EDTA (0.01 M, pH 3.99), citric acid (0.5 M, pH 1.27), and $MgCl_2$ (0.1 M, pH 8.82), respectively. S-1 soil had 56.83% of residue form and 43.17% of non-residue form (18.04% of exchangeable form), respectively. Although the concentrations of these fractions sharply decreased after HCl washing, since the exchangeable forms with relatively large mobility are still distributed as high as 18.78% (to Pb total content in residual soils) in S-1 soil, it is necessary to devise a proper management plan for residual soils after soil washing application.

• 한국환경농학회지
• /
• 제38권1호
• /
• pp.54-60
• /
• 2019

본 연구는 실제 불화수소 누출 사고에 대한 OCA(Off-site consequence analysis) 분석을 통해 최악 및 대안의 사고시나리오를 선정하여 사고영향범위 예측치를 평가하고, 사고 반경 내 농작물의 잔류오염도를 측정함으로써 화학사고로부터 발생될 수 있는 환경 피해영향범위를 도출하고자 하였다. KORA 소프트웨어를 이용하여 사고영향범위를 분석한 결과, 최악의 사고시나리오는 사고 발생지점으로부터 10 km 이상, 대안의 사고시나리오는 1,968 m의 영향범위가 산정되었고, ALOHA 소프트웨어 구동 결과는 약 1.9 km를 나타내었다. 아울러, 실제 사고 지역 내 농작물의 불소화물 잔류 여부를 측정한 결과, 피해지역 내 불소화물 농도는 4.96~276.82 mg/kg 범위로 사고 발생지점 인근이(E-1) 가장 높았고(276.82 mg/kg), 동쪽방향으로 멀어질수록 잔류농도가 감소하는 경향이었다. 한편, 북동 방향 2지점과 남동 방향 4지점은 사고 발생지점 인근보다는 낮은 경향이었다(4.96~28.98 mg/kg). 이러한 결과를 비추어 2 km 내외 지점의 불소화물 농도가 5 mg/kg 이하의 미미한 수준과 대안의 사고시나리오 예측 영향범위인 약 1.9 km를 고려했을 때 피해영향범위는 약 2 km 내외 수준인 것으로 추정된다. 이와 같이 OCA 평가는 누출조건, 기상조건, 시간경과에 따른 물리화학적 변수 등을 사고현장과 동일하게 입력할 수 없기 때문에 실제 피해영향범위와 다른 경향은 있지만 농작물 중 불소화물 잔류오염 여부를 동시에 평가함에 따라 화학사고로부터 화학물질의 확산범위를 산정하는데 있어 도움이 될 수 있을 것으로 판단된다.

• 농약과학회지
• /
• 제15권1호
• /
• pp.28-35
• /
• 2011

안산 및 수원시에서 유통 중인 다류 19품목(감잎차, 국화차, 녹차, 라벤더차, 로즈마리차, 민들레차, 보이차, 뽕잎차, 수국차, 자스민차, 나미향차(찹쌀차), 메밀차, 쑥차, 연화차, 오룡차, 용정차, 장미차, 철관음차, 화과차)을 대상으로 218종의 농약 잔류실태를 조사하였다. 조사대상 65건 중 19건에서 15종(bifenthrin, bromopropylate, chlorpyrifos, cyhalothrin, cypermethrin, chlorfenapyr, dicofol, endosulfan, fenpropathrin, fludioxonil, fenvalerate, iprobenfos, isoprothiolane, tetradifon, triazophos)의 농약이 검출돼 23.1%의 검출률을 나타냈다. 검출된 농약의 잔류량은 0.01~1.24 mg/kg으로 대부분 잔류허용기준 이하로 나타났으나 보이차(2006 년산) 1건에서 bifenthrin이 기준치(0.3 mg/kg)를 초과한 것으로 나타났다. 검출된 농약 15종에 대한 위해도를 평가한 결과 EDI/ADI 값은 0.0001~0.0844%로 나타나 다류에 존재하는 잔류농약은 안전한 수준인 것으로 평가되었다.

• 한국산업융합학회 논문집
• /
• 제26권6_2호
• /
• pp.1011-1017
• /
• 2023

In this study, the harmless crack size (a_hml) by double shot peening (DSP) using shot balls with different diameters was evaluated on carburized, quenched-tempered SCM822H steel. The minimum crack size (a_NDI) detectable by non-destructive inspection was also evaluated. The relationship between the crack size (a_25,50) that reduces the fatigue limit by 25% and 50% and a_hml was evaluated. The residual stress of DSP was greater in SP_(0.6+0.08) than SP_(0.8+0.08) and appeared deeper in the depth direction. In addition, the hardness below the surface appeared larger. The fatigue limit of DSP increased 2.07 times and 1.95 times compared to non-SP. All a_hml of the DSP specimen was determined at the depth (a). The compressive residual stress distribution affects a_hml, and the a_hml of SP_(0.6+0.08), which has a large compressive residual stress and a high fatigue limit, appeared large. a_hml of SP_(0.6+0.08) introduced deeper than the residual stress of SP_(0.8+0.08) is larger in the range of As=1.0-0.3. Since the residual stress in the thickness direction has a greater effect on a_hml than the residual stress at the surface, it is necessary to introduce it more deeply. The relation of a_hml, a_25,50, and a_NDI were evaluated in the point for safety and reliability.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권1호
• /
• pp.24-33
• /
• 2010

Design of a Pump Jet Propulsor (PJP) was undertaken for an underwater body with axisymmetric configuration using axial/low compressor design techniques supported by Computational Fluid Dynamics (CFD) analysis for performance prediction. Experimental evaluation of the PJP was earned out through experiments in a Wind Tunnel Facility (WTF) using momentum defect principle for propulsive performance prior to proceeding with extensive experimental evaluation in towing tank and cavitation tunnel. Experiments were particularly conducted with respect to Self Propulsion Point (SPP), residual torque and thrust characteristics over a range of vehicle advance ratio in order to ascertain whether sufficient thrust is developed at the design condition with least possible imbalance torque left out due to residual swirl in the slip stream. Pumpjet and body models were developed for the propulsion tests using Aluminum alloy forged material. Tests were conducted from 0 m/s to 30 m/s at four rotational speeds of the PJP. SPP was determined confirming the thrust development capability of PJP. Estimation of residual torque was carried out at SPP corresponding to speeds of 15, 20 and 25 m/s to examine the effectiveness of the stator. Estimation of thrust and residual torque was also carried out at wind speeds 0 and 6 m/s for PJP RPMs corresponding to self propulsion tests to study the propulsion characteristics during the launch of the vehicle m water where advance ratios are close to Zero. These results are essential to assess the thrust performance at very low advance ratios to accelerate the body and to control the body during initial stages. This technique has turned out to be very useful and economical method for quick assessment of overall performance of the propulsor and generation of exhaustive fluid dynamic data to validate CFD techniques employed.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.93-96
• /
• 2003

Laser beam welding process is a relatively new process in comparison with arc welding process, but it is expected to apply widely because of the many advantages, and research and development of that process is being progressed actively for the practical use. the application of this welding process has been restricted due to the high initial investment and the need of precise processing against the material, but cost reduction and thick plate welding in high speed have become practial by recent technological development, and this welding process to not only small parts in automobile, machinery and physicochemical field, but also a large structure and pipe line are being applied. In order to utilize this welding process appropriately to a steel structure, the properties of welding residual stresses and fracture toughness in welded joints are to be investigated for relibilty. On this study, after performing the finite element analysis, thermal and residual stress properties have been examined to the general structural steel (HT50) by laser beam welding. Besides, the property of fracture toughness has been investigated by the Charpy impact test and 3-points bending CTOD test carried out in the range of temperature between $-60^{\circ}C$ and $20^{\circ}C$. From the research results it is revealed that the maximum residual stress appears in the center of plate thickness and the fracture toughness is influenced by strength mis-match.

• Toxicological Research
• /
• 제34권2호
• /
• pp.111-125
• /
• 2018

Solvents can be used in the manufacture of medicinal products provided their residual levels in the final product comply with the acceptable limits based on safety data. At worldwide level, these limits are set by the "Guideline Q3C (R6) on impurities: guideline for residual solvents" issued by the ICH. Diisopropyl ether (DIPE) is a widely used solvent but the possibility of using it in the pharmaceutical manufacture is uncertain because the ICH Q3C guideline includes it in the group of solvents for which "no adequate toxicological data on which to base a Permitted Daily Exposure (PDE) was found". We performed a risk assessment of DIPE based on available toxicological data, after carefully assessing their reliability using the Klimisch score approach. We found sufficiently reliable studies investigating subchronic, developmental, neurological toxicity and carcinogenicity in rats and genotoxicity in vitro. Recent studies also investigated a wide array of toxic effects of gasoline/DIPE mixtures as compared to gasoline alone, thus allowing identifying the effects of DIPE itself. These data allowed a comprehensive toxicological evaluation of DIPE. The main target organs of DIPE toxicity were liver and kidney. DIPE was not teratogen and had no genotoxic effects, either in vitro or in vivo. However, it appeared to increase the number of malignant tumors in rats. Therefore, DIPE could be considered as a non-genotoxic animal carcinogen and a PDE of 0.98 mg/day was calculated based on the lowest No Observed Effect Level (NOEL) value of $356mg/m^3$ (corresponding to 49 mg/kg/day) for maternal toxicity in developmental rat toxicity study. In a worst-case scenario, using an exceedingly high daily dose of 10 g/day, allowed DIPE concentration in pharmaceutical substances would be 98 ppm, which is in the range of concentration limits for ICH Q3C guideline class 2 solvents. This result might be considered for regulatory decisions.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권8호
• /
• pp.4847-4851
• /
• 2013

Objectives: To evaluate accuracy of FDG-PET CT in prediction of persistent disease in head and neck cancer cases and to determine prognostic value of metabolic tumor response. Materials and Methods: Between 2009 and 2011, 46 patients with squamous cell carcinoma of head and neck receiving PET-CT were treated with definitive radiotherapy, with or without chemotherapy. There were 29 nasopharyngeal, 11 hypopharyngeal, 3 oropharyngeal and 3 laryngeal cancer patients, with a median age of 50.5 years (range 16-84), 32 males and 14 females. All patients were evaluated with PET-CT median 3-5 months (2.4-9.4) after completion of radiotherapy. Results: After a median 20 months of follow up, complete metabolic response was observed in 63% of patients. Suspicious residual uptake was present in 10.9% and residual metabolic uptake in 26.0% of patients. The overall sensitivity, specificity, positive predictive value and negative predictive value of FDG-PET-CT for detection of residual disease was 91% and 81%, 64% and 96% respectively. Two year LRC was 95% in complete responders while it was 34% in non-complete responders. Conclusions: FDG PET CT is a valuable tool for assessment of treatment response, especially in patients at high risk of local recurrence, and also as an indicator of prognosis. Definitely more precise criteria are required for assessment of response, there being no clear cut uptake value indicating residual disease. Futhermore, repair processes of normal tissue may consume glucose which appear as increased uptake in control FDG PET CT.