• Transactions of Materials Processing
• /
• v.17 no.7
• /
• pp.496-500
• /
• 2008

Plastics is commonly used in consumer electronics because of it is high strength per unit mass and good productivity. But plastic parts are usually distorted after injection molding due to the residual stress after filling, packing, cooling process, and etc. And plastic material is to be deteriorated according to various temperature conditions and operating time, which can be characterized by stress relaxation and creep. The viscoelastic behavior of plastic materials in time domain can be expressed by the Prony series of the commercial code, ABAQUS. In the paper, the process to predict the post deformation under cyclic thermal loadings was suggested. The process was applied to the real panel, and the deformation predicted by the analysis was compared with that of real test, which showed the possibility of applying the suggested process to predict the post deformation of plastic product under thermal loadings.

• Proceedings of the Korean Professional Engineer Association Conference
• /
• 1984.12a
• /
• pp.84-91
• /
• 1984

Heavy Residual Fuel oils is a mixture of reduced crude from crude unit, bottom products from vacuum and/or catalytic cracking unit with distillate to meet the specification and generally used as Heavy Fuel Oil for large combustion engines, boilers, etc…. But this study was made to investigate Heavy Residual Fuel oils for using as industrial raw material and resulted the following possibilties as valuable raw material as well as Heavy Fuel Oil. 1) Production of straight asphalt through vacuum distillation unit. 2) Using straight asphalt from vacuum distillation unit for manufacturing of Blown Asphalts, Cut Back Asphalts, Emulsified Asphalts and Asphalt Compound, etc…. 3) Using waxy oil side streams for manufacturing of raw oil to be Lube Oil base stocks through solvent dewaxing. 4) Production of lube base oils from dewaxed raw oil through chemical treatments. 5) Manufacturing of paraffine wax from slack wax to be produced as by product of dewaxing process.

• Microbiology and Biotechnology Letters
• /
• v.19 no.2
• /
• pp.186-192
• /
• 1991

It is very important to have a good kinetic model which considers the effects of both ammonium and glucose for the control and optimization of the poly-${\beta}$-hydroxybutyrate (PHB) fermentation. A kinetic model for the growth of Alcaligenes eutrophus and the biosynthesis of PHB under both ammonium and glucose limitation was proposed. Growth rate of residual biomass was expressed as a function of concentrations of residual biomass, glucose and ammonium having glucose inhibition. PHB production rate was expressed as a function of concentrations of residual biomass, glucose, ammonium and PHB content having ammonium and product inhibitions. Novel approaches were made to estimate the parameters in the model equations which considered two limiting substrates. Model parameters were evaluated by graphical and simplex methods. The proposed kinetic model fitted the data very well.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.5
• /
• pp.44-52
• /
• 1996

A procedure predicting warpage and post-deformation due to heat resistance test is presented. The procedure is applied to the injection molding processes of automotive plastic components, which are the door trim and the instrument pannel. The warpage of products is obtained from the residual stress after filling, packing and cooling process, and the post deformation due to the heat resistance test is calculated in the structural analysis of the product at the ejection temperature with the initial condition of residual stress, the boundary conditions and heat resistance conditions. The analyses give some useful guide lines in the design of automotive plastic parts which should satisfy heat resistance regulation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.288-292
• /
• 2008

Plastics is commonly used in consumer electronics because of it is high strength per unit mass and good productivity. But plastic parts are usually distorted after injection molding due to the residual stress after filling, packing, cooling process, and etc. And plastic material is to be deteriorated according to various temperature conditions and operating time, which can be characterized by stress relaxation and creep. The viscoelastic behaviour of plastic materials in time domain can be expressed by the Prony series of the commercial code, ABAQUS. In the paper, the process to predict the post deformation under cyclic thermal loadings was suggested. The process was applied to the real panel, and the deformation predicted by the analysis was compared with that of real test, which showed the possibility of applying the suggested process to predict the post deformation of plastic product under thermal loadings.

• Mass Spectrometry Letters
• /
• v.14 no.2
• /
• pp.36-41
• /
• 2023

A simple method was developed to determine residual p-arsanilic acid (ASA), an organo-arsenic compound used as a feed additive, in aquatic products (eel, halibut, and shrimp) using EDTA-assisted solvent extraction and LC-MRM. The method was successfully validated in terms of specificity, linearity (coefficient of determination ≥ 0.995), accuracy (recovery or R, 72.72-78.73%), precision (the relative standard deviation of R, 2.08-6.98%), and sensitivity (the lower limit of quantitation, 5 ppb) according to CODEX guidelines (CAC-GL 71-2009). The use of EDTA in the extraction solvent and water with a suitable pH modifier as the reconstitution solvent may be the key factors for successful results. This is the first method that can be used for monitoring residual ASA in aquatic products using LC-MRM and could contribute to establishing a better aquatic product safety management system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.271-274
• /
• 2009

This paper deals with an evaluation of the product quality according to intermesh of the roller straightening process of a steel cord. To perform the experiments, a single-layered steel cord with three wires is selected as a target. Intermeshes at inlet and outlet of the roller straightening device are selected as a respective design parameter. According to two intermeshes of the roller straightening device, a design table is generated and experiments were performed. Three assessment items of the product quality, such as the residual torsion, the arc-height and the pre-forming ratio, are measured in each experimental case for the quantitative evaluation of a steel cord. Based on the measured data, the sensitivity of two intermeshes was analyzed and the prediction equation for the product quality of a steel cord was also constructed from the regression analysis.

• Bulletin of the Korean Mathematical Society
• /
• v.20 no.2
• /
• pp.99-103
• /
• 1983

Internal heat generation is one of the insidious conditions affecting the quality of an industrial product after it is cast, coated, molded, forged or laminated. Frequently, the product is pressed into service before the exothermic chemical reactions in the generic material has been completed. The heat liberated from this continuing chemical reaction or the residual deformation from the rheological activities in the materials must be adequately removed or prevented, or the product may be discolored, warped, weakened or even "ignited" spontaneously. Numerous instances of premature structural failures, product-recalls, and/or system-malfunctions have been recorded in recent history. The Coulee Dam was poured with pre-chilled concrete just to negate this freakish encore. It is well-known that concrete (a non-isotropic conducting medium), for instance, takes 28 days to develop its full strength. During this period of curing it is conceivable that the processes of internal heat generation, heat conduction and heat dissipation take place simultaneously inside the medium.he medium.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1179-1182
• /
• 2005

Nowadays, CRTs are threatened by the flat panel displays (FPD). The screen quality of the CRT is one of best among the displays, however, the depth of CRTs becomes one of the most important design factor to maintain the dominated portion in the display market. When designing slim CRTs, the structure of the glass is important design factor because of the weight and safety. The stress in the glass is increased according to the shortening the total length of tube. The residual stress of the seal is also a major factor should be considered due to the large seal edge thickness. The glass design concept for Vixlim is introduced in this paper.

• International Journal of Reliability and Applications
• /
• v.7 no.2
• /
• pp.177-186
• /
• 2006

Typical confidence intervals for a mean or mean residual life (MRL) are centered about the mean or mean residual life. We discuss novel confidence intervals that produce statements like "we are 95% confident that the MRL function, e(t), is greater than a prespecified $\mu_o$ for all t in the interval [0, $\hat{\theta})$)" where $\hat{\theta}$ is determined from the sample data, confidence level, and $\mu_o$. Also, we can have statements like 'we are 95% confident that the MRL of population 1, namely $e_1$(t), is greater than the MRL of population 2, $e_2$(t), for all t in the interval [0, $\hat{\theta}$)" where $\hat{\theta}$ is determined from the sample data and confidence level. We illustrate these one and two sample confidence intervals on internal bonds (tensile strengths) for an important modem engineered wood product, called medium density fiberboard (MDF), used internationally.