• International Journal of Concrete Structures and Materials
• /
• 제10권1호
• /
• pp.75-85
• /
• 2016

Fire ranks high among the potential risks faced by most buildings and structures. A full understanding of temperature effects on fiber reinforced concrete is still lacking. This investigation focuses on the study of the residual compressive strength, stress strain behavior and surface cracking of structural polypropylene fiber-reinforced concrete subjected to temperatures up to $300^{\circ}C$. A total of 48 cubes was cast with different fiber dosages and tested under compression after exposing to different temperatures. Concrete cubes with varying macro (structural) fiber dosages were exposed to different temperatures and tested to observe the stress-strain behavior. Digital image correlation, an advanced non-contacting method was used for measuring the strain. Trends in the relative residual strengths with respect to different fiber dosages indicate an improvement up to 15 % in the ultimate compressive strengths at all exposure temperatures. The stress-strain curves show an improvement in post peak behavior with increasing fiber dosage at all exposure temperatures considered in this study.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권9호
• /
• pp.3672-3684
• /
• 2015

Recently, the standardization of backward compatible JPEG image coding for high dynamic range (HDR) image has been undertaken to establish an international standard called "JPEG XT." The JPEG XT consists of two layers: the base layer and the residual layer. The base layer contains tone mapped low dynamic range (LDR) image data and the residual layer contains the error signal used to reconstruct the HDR image. This paper gives the result of a study to evaluate the overall performance of tone mapping operators (TMOs) for this standard. The evaluation is performed using five HDR image datasets and six TMOs for profiles A, B, and C of the proposed JPEG XT standard. The Tone Mapped image Quality Index (TMQI) and no reference image quality assessment (NR IQA) are used for measuring the LDR image quality. The peak signal to noise ratio (PSNR) is used to evaluate the overall compression performance of JPEG XT profiles A, B, and C. In TMQI and NR IQA measurements, TMOs using display adaptive tone mapping and adaptive logarithmic mapping each gave good results. A TMO using adaptive logarithmic mapping gave good PSNRs.

• Journal of Astronomy and Space Sciences
• /
• 제22권4호
• /
• pp.483-490
• /
• 2005

CCD 영상센서의 경우 포화 상태를 초과하는 막대한 양의 광자가 조사될 때 $Si-SiO_2$ 접합 면에서 전하가 포획될 순 있으며 이 접합 면에 남아 있는 전하와 관련되어 잔존영상이 보일 수 있다. 이러한 잔존영상은 특히 전면조사 방식의 CCD에서 일어난다. 이 현상이 정밀 측광에 영향을 줄 수 있음에도 불구하고 잔존영상에 대한 정량적인 분석과 보고간 국내에서는 찾아보기 힘들었다. 이에 본 연구에서는 전면조사 방식의 CCD를 사용하는 레몬산천문대 관측자료의 암전자화면에서 잔존영상을 확인하고 잔존영상이 관측에 미칠 수 있는 영향을 분석해 보았다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.101-103
• /
• 2009

Minimizing the residual impurity level on the MgO layer is the key factor for reducing temporal dark image sticking on bright screen. In this paper, to reduce the residual impurity level on the MgO layer of 50-in. full-HD ac-PDP with He (35%) - Xe (11%) contents, RF-plasma treatments on the MgO layer are adopted under various gases for plasma treatment. As a result of monitoring the difference in the display luminance between the before and after 5-min. sustain discharge with a square-type image at peak luminance, the Ar and Ar>$O_2$ plasma treatments can reduce the temporal dark image sticking on the bright screen in an ac-PDP.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.867-870
• /
• 2007

In order to solve image sticking phenomena, the gas-phase and liquid-phase interfacial reactions of photosensitive polyimide can annihilate photoreactive carbon-carbon double bonds, which remain after photo-alignment process. The annihilation processes dramatically affect residual DC and photochemical reorientation of photoactive functional groups.

• 한국공작기계학회논문집
• /
• 제13권3호
• /
• pp.119-125
• /
• 2004

Generally, it is used the compensation spring to compensate the inaccuracy of screen image induced by thermal deformation in CRT monitor. Its mechanism is bi-metallic system made of heterogeneous metals and these is bonded by laser welding. But laser welding induces the non-uniform temperature distribution and locally residual stress is yielded by these temperature deviation. This paper studies residual stress of laser weldment using FEA and hole drilling method. The results are followed. In the case of heterogeneous materials weldment, higher residual stress induced in the weldment region of SUS 304 which have larger CTE than Ni 36 and residual stress on the middle of specimen is higher by 10.9% than that of its surface Measured residual stress of SUS 304 yield 481MPa and that of Ni 36 is 140.5MPa in the vicinity of the welding region. And the residual distribution is very similar in comparison with FEA result.

• 한국정보통신학회논문지
• /
• 제26권12호
• /
• pp.1919-1925
• /
• 2022

본 논문에서는 시맨틱 분할을 위한 조건부 생성적 적대 신경망 기반의 이미지 대 이미지 변환 접근법을 제안한다. 시맨틱 분할은 동일한 개체 클래스에 속하는 이미지 부분을 함께 클러스터링하는 작업이다. 기존의 픽셀별 분류 방식과 달리 제안하는 방식은 픽셀 회귀 방식을 사용하여 입력 RGB 이미지를 해당 시맨틱 분할 마스크로 구문 분석한다. 제안하는 방법은 Pix2Pix 이미지 합성 방식을 기반으로 하였다. 잔차 연결이 훈련 프로세스를 가속화하고 더 정확한 결과를 생성하므로 생성기 및 판별기 아키텍처 모두에 대해 잔여 연결 기반 컨볼루션 신경망 아키텍처를 사용하였다. 제안하는 방법은 NYU-depthV2 데이터셋를 이용하여 학습 및 테스트 되었으며 우수한 mIOU 값(49.5%)을 달성할 수 있었다. 또한 시맨틱 객체분할 실험에서 제안한 방법과 현재 방법을 비교하여 제안한 방법이 기존의 대부분의 방법들보다 성능이 우수함을 보였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 제14회 신호처리 합동 학술대회 논문집
• /
• pp.747-750
• /
• 2001

The paper presents an algorithm for estimating the variance of additive zero mean Gaussian noise in an image. The algorithm uses the wavelet transform which is a good tool for energy compaction. The algorithm consists of three steps. At first, high frequency components, wavelet coefficients in HH band, are generated from a noisy image by the wavelet transform. In a second step, high frequency components which are out of the noise range ate eliminated. Finally, if the image has many components eliminated in the previous step, then its noise estimated value is reduced. Experimental results show that the wavelet filter has better performance than the other high pass filters such as a Laplacian filter, residual from a median filter, residual from a mean filter, and a difference operator. In various images, the algorithm reduces 50% of estimated error on an average.

• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.385-392
• /
• 2013

An uncalibrated visual servo control method for tracking a target is presented. We define the robot-positioning problem as an unconstrained optimization problem to minimize the image error between the target feature and the robot end-effector feature. We propose a method to find the residual term for more precise modeling using the secant approximation method. The composite image Jacobian is estimated by the proper method for eye-to-hand configuration without knowledge of the kinematic structure, imaging geometry and intrinsic parameter of camera. This method is independent of the motion of a target feature. The algorithm for regulation of the joint velocity for safety and stability is presented using the cost function. Adaptive regulation for visibility constraints is proposed using the adaptive parameter.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2019년도 춘계학술발표대회
• /
• pp.525-528
• /
• 2019

Atmospheric particle removal is a challenging task and attacks wide interests in computer vision filed. In this paper, we proposed a single image snow removal framework based on deep residual networks. According to the fact that there are various snow sizes in a snow image, the inception module which consists of different filter kernels was adopted to extract multiple resolution features of the input snow image. Except the traditional mean square error loss, the perceptual loss and total variation loss were employed to generate more clean images. Experimental results on synthetic and realistic snow images indicated that the proposed method achieves superior performance in respect of visual perception and objective evaluation.