• Journal of Chest Surgery
• /
• v.28 no.3
• /
• pp.237-246
• /
• 1995

Between March 1989 and December 1994, one-stage repair was performed for correction of the intracardiac malformations associated with aortic coarctation in 34 patients or interrupted aortic arch in 8 patients via median sternotomy. There were 26 male and 16 female patients, and their body weight ranged from 1.8 to 8 kg [mean weight, 4.0 1.4 kg . The age at the operation ranged from 7 days to 18 months [mean age, 3.1 $\pm$ 3.8 months . The repair of aortic coarctation or interrupted aortic arch was performed using extended end-to-end anastomosis in most of the patients [86%, 36/42 , and six patients underwent ductal tissue excision and patch aortoplasty. Intracardiac defects were corrected concomitantly through the right atrium unless the anatomy dictated otherwise. Obstructive outlet septum was resected whenever necessary. There were seven early deaths [16.8 % , and three late deaths with a mean follow-up period of 25 months [range from 1 to 65 months . Three patients were reoperated upon residual subaortic stenosis, stenosis at the RPA origin, and subacute bacterial endocarditis respectively. None showed any significant residual or anastomotic stenosis postoperatively. One stage repair of the aortic coarctation and interrupted aortic arch associated with intracardiac defect leaves no native coarctation shelf tissue or residual hypoplasia in the repaired segment, has low incidence of recurrent or residual stenosis, minimizes reoperation and incisions, and manages arch hypoplasia easily. We concluded that surgical results of one-stage repair for the intracardiac malformation associated with aortic coarctation or interrupted aortic arch are reasonable.

• Journal of Advanced Navigation Technology
• /
• v.25 no.3
• /
• pp.194-202
• /
• 2021

Ionosphere, one of the largest error sources, can pose potentially harmful threat to single-frequency GNSS (global navigation satellite system) user even after applying ionospheric corrections to their GNSS measurements. To quantitatively assess ionospheric impacts on the satellite navigation-based applications using simulation, the standard deviation of residual ionospheric errors is needed. Thus, in this paper, we determine conservative statistical quantity that covers typical residual ionospheric errors for nominal days. Extensive data-processing computes TEC (total electron content) estimates from GNSS measurements collected from the Korean reference station networks. We use Klobuchar model as a correction to calculate residual ionospheric errors from TEC (total electron content) estimate. Finally, an exponential delay model for residual ionospheric errors is presented as a function of local time and satellite elevation angle.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.8-15
• /
• 2003

A practical design method for supersonic wings has been developed. The method is based on Takanashi's method that uses integral equations and iterative "residual-correction" concept. The geometry correction is calculated by solving linearized small perturbation equation (LSP) with the difference between garget and objective surface pressure distributions as a boundary condition. In the present method, LSP equation is analytically transformed to integral equations by using the Green's theorem. Design results of an isolated wing and wing-nacelle configurations are presented here.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1500-1504
• /
• 2005

This paper proposes the design methodology of genetic algorithm (GA)-based fuzzy Kalman filter for tracking the maneuvering target. The performance of the standard Kalman Filter (SKF) has been degraded because mismatches between the modeled target dynamics and the actual target dynamics. To solve this problem, we use the method to estimate the increment of acceleration by a fuzzy system using the relation between maneuver filter residual and non-maneuvering one. To optimize the fuzzy system, a genetic algorithm (GA) is utilized and this is then tuned by the fuzzy logic correction. Finally, the tracking performance of the proposed method has been compared with those of the input estimation (IE) technique and the intelligent input estimation (IIE) through computer simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.912-919
• /
• 1994

A new error control line code based on an extended Hamming code is proposed and its performance is analyzed in this paper. The proposed code is capable of single error correction and double error detection since its minimum Hamming distance is 4. In addition, the error detection capability can be oncreased due to the redundancy bit used for line coding. As a result, the proposed code shows lower code rate, but better spectral characteristics in low frequency region and lower residual bit error rate than the conventional error correction line code using Hamming (7, 4) code.

• Journal of Radiation Protection and Research
• /
• v.38 no.4
• /
• pp.228-233
• /
• 2013

It has been continuously generated the requirement for the replacement of the main components such as a steam generator due to the deterioration of the nuclear power plant all around the world. Also, a large amount of radioactive metal was generated during the decommissioning in a short period. It is required to make an accurate measurement of the residual radioactivity for recycling the metal waste for releasing from regulatory control. In planning the measurement procedures, the influence of geometry, self-absorption, density and other relevant factors on the representativeness of the measurements should be considered for the decommissioning metal waste. In this study, the method for measurement procedures, the source term evaluation, the ways to secure representative samples, the measurement device for wide area and the self-absorption correction factors for different density were evaluated. The metal samples for measurement were prepared for securing the simple geometry and representative by melting process. The developed correction method for measuring the radioactivity a variety density of metal waste could improve the reliability of the evaluation results for clearance.

• Korean Journal of Remote Sensing
• /
• v.27 no.3
• /
• pp.369-377
• /
• 2011

Since well-calibrated satellite data is critical for their applications, calibration and validation of COMS science data was one of the key activities during the IOT. COMS MI radiometric calibration process was divided into two phases according to the out-gassing of the sensor: calibrations of the visible (VI) and infrared (IR) channels. Different from the VIS calibration, the calibration steps for the IR channels followed additional processes to secure their radiometric performances. Primary calibration steps of the IR were scan mirror emissivity correction, midnight effect compensation, slope averaging and 1/f noise compensation after a nominal calibration. First, the scan mirror emissivity correction was conducted to compensate the variability of the scan mirror emissivity driven by the coating material on the scan mirror. Second, the midnight effect correction was performed to remove unreasonable high spikes of the slope values caused by the excessive radiative sources during the local midnight. After these steps, the residual (difference between the previous slope and the given slope) was filtered by a smoothing routine to eliminate the remnant random noises. The 1/f noise compensation was also carried out to filter out the lower frequency noises caused from the electronics in the Imager. With through calibration processes during the entire IOT period, the calibrated IR data showed excellent performances.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.132.2-132.2
• /
• 2011

We are developing Adaptive Optics (AO) system for astronomical use. The He-Ne laser works as an artificial light source. The tip-tilt correction servo is added to our AO system. The tip-tilt term, among the Zernike terms, is the biggest contributor of wavefront deformation caused by atmospheric turbulence at small telescopes. The tip-tilt correction servo consists of a Piezo tip-tilt platform with a mirror, a quadrant photodiode as a tip-tilt sensor, and controllers. The Shack-Hartmann wavefront sensor measures the residual wavefront errors and they are corrected by the MEMS (Micro Electro Mechanical System) deformable mirror. The MEMS deformable mirror allows the compact size at low cost compare to adaptive secondary mirror and other deformable mirrors. As the frame rates of the MEMS deformable mirror is about tens of kHz, the frame rates of the detector in wavefront sensor is the bottleneck of the wavefront correction speed. For faster performance, we replaced a CCD which provides frame rates only 70 Hz with a CMOS with frame rates up to 450 Hz.

• Korean Journal of Agricultural Science
• /
• v.47 no.3
• /
• pp.567-576
• /
• 2020

One of the main challenges receiving much attention in the Rwandan agriculture and food industry in recent decades is the increases in maize prices. Indeed, a rise in maize prices causes higher living expenses for households because maize, which is a major staple food crop, constitutes a significant share of total food consumption among households in Rwanda. The aim of this study was to assess the extent of integration and how prices are transmitted between retail and wholesale markets of domestic maize in Rwanda. This study used monthly data of retail and wholesale prices of maize from January 1995 to December 2019. This empirical investigation was based on a linear cointegration approach and an asymmetric error correction model framework. Using the augmented dickey-fuller residual-based test and the Johansen Maximum Likelihood cointegration test, the results revealed that the retail and wholesale markets of maize are integrated. Hence, prices in these markets do not drift apart in the long run. The results of the Granger causality test revealed that there is a unidirectional causal relationship flowing from wholesale prices to retail prices, i.e., wholesale prices influence retail prices. Accordingly, the results from the asymmetric error correction model confirmed the presence of a positive asymmetric price transmission between wholesale and retail prices of maize in Rwanda. Thus, we suggest that policymakers take a critical look at the causes and factors that may influence asymmetry price transmission.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.78-87
• /
• 2013

Even though the notice No. 2010-11 of the Ministry of Food and Drug Safety Administration that has been applied to analyze the content of the water soluble residue eluted from multi-layer paperboard was abolished in 2011, its application for the analysis on evaporation residue is still valid. There are very high possibilities that the noticed existing method gives the misleading result on the evaporation residue due to the water soluble starch eluted from the multi-layer paperboard. The quantitative analysis on water-soluble residue with starch content correction has been carried in the study using UV/Vis spectroscopy and HPLC. The UV/Vis spectroscopy absorbance analysis showed the large amount of the oxidized starch obtained from the aqueous residue eluted out of the multi-layer paperboard after the iodine, ${\alpha}$-amylase reaction, and starch hydrolysis. The residual content decreased by the correction through the enzyme hydrolysis.