• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.5
• /
• pp.353-366
• /
• 2019

This research proposes an optimal flushing operation technique in an effort to prevent secondary water pollutions and accidents in aged pipes, and to improve the cleaning effect of unidirectional flushing. Water flow directions were analyzed using EPANET 2.0, while flushing and air scouring experiments in forward and reverse directions were performed in the field. In 42 experiments, average residual chlorine concentration and turbidity were improved after cleaning compared to before cleaning. It was found that even when the same cleaning method was used, further improvement of cleaning effect was possible by applying air injection and reverse direction cleaning techniques. By means of one-way ANOVA(Analysis of variance), it was also possible to statistically verify the need of actively utilizing air injection and reverse direction cleaning. Based on correlation between turbidity and TSS, the total amount of suspended solids removal was estimated for 874 flushing operations and 194 air scouring operations. The result showed that air scouring used more discharge water than flushing by an average of $4.9m^3$ yet with larger amounts of suspended solids removal by an average of 145.9 g. The result of analysis on turbidity values from 887 flushing operations showed low cleaning effect of unidirectional flushing for the pipes with diameters over 300 mm. In addition, the turbidity values measured during cleaning showed an increasing tendency as pipe age increased. The methodology and results of this research are expected to contribute to the efficient maintenance and improvement of water quality in water distribution networks. Follow-up research involving the measurement of water quality at regular time intervals during cleaning would allow a more accurate comparison of discharge water quality characteristics and cleaning effects between different cleaning methods. To this end, it is considered necessary to develop a standardized manual that can be used in the field and to provide relevant trainings.

• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.380-386
• /
• 2020

The study was conducted for the safety evaluation of 320 pesticide residues in 768 Lentinula edodes fruit body samples and 143 L. edodes media samples, which are distributed nationwide in South Korea. The monitoring method was the second of the multi-residue methods in the Korean Food Code. GC-ECD, GC-NPD, and GC-MSD were used as evaluation equipment for analysis. Single-analysis of the target pesticides was performed for mepiquat chloride. Through the analysis of collected L. edodes samples, pesticide residues were detected in total seven cases, including four L. edodes fruit body samples and three L. edodes media samples. The detected pesticide residues were carbendazim, diflubenzuron, fluopyram, and dinotefuran. In this study, carbendazim was detected in three L. edodes fruit body samples and one L. edodes media sample. The detected amount of carbendazim was 0.056, 0.17, 0.043, and 0.09 mg/kg, respectively. The amount of carbendazim in the collected L. edodes samples was detected below the MRLs (maximum residue level). The detected amounts of fluopyram and dinotefuran were 0.068 mg/kg and 0.06 mg/kg, respectively. Two pesticide residues were detected in the medium in one case. Mepiquat chloride was not detected in this study. These results suggested that residual pesticides were detected in a small number of collected L. edodes. However, the PLS for unregistered pesticides MRL was 0.01 ppm; therefore, we have to conduct research on preparing safety standards for mushrooms, including L. edodes.

• Journal of Broadcast Engineering
• /
• v.27 no.3
• /
• pp.378-390
• /
• 2022

With the recent development of deep composite multiplication neural network learning, deep learning techniques applied to single-image super-resolution have shown good results, and the strong expression ability of deep networks has enabled complex nonlinear mapping between low-resolution and high-resolution images. However, there are limitations in applying it to real-time or low-power devices with increasing parameters and computational amounts due to excessive use of composite multiplication neural networks. This paper uses blocks that extract hierarchical characteristics little by little using information distillation and suggests the Recursive Distillation Super Resolution Network (RDSRN), a lightweight network that improves performance by making more accurate high frequency components through high frequency residual purification blocks. It was confirmed that the proposed network restores images of similar quality compared to RDN, restores images 3.5 times faster with about 32 times fewer parameters and about 10 times less computation, and produces 0.16 dB better performance with about 2.2 times less parameters and 1.8 times faster processing time than the existing lightweight network CARN.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.643-659
• /
• 2022

Geologic sequestration technologies such as CCS (carbon capture and storage), EGS (enhanced geothermal systems), and EOR (enhanced oil recovery) have been widely implemented in recent years, prompting evaluation of the mechanical stability of storage sites. As fluid injection can stimulate mechanical instability in storage layers by perturbing the stress state and pore pressure, poroelastic models considering various injection scenarios are required. In this study, we calculate the pore pressure, stress distribution, and vertical displacement along a surface using commercial finite element software (COMSOL); fault slips are subsequently simulated using PyLith, an open-source finite element software. The displacement fields, are obtained from PyLith is transferred back to COMSOL to determine changes in coseismic stresses and surface displacements. Our sequential use of COMSOL-PyLith-COMSOL for poroelastic modeling of fluid-injection and induced-earthquakes reveals large variations of pore pressure, vertical displacement, and Coulomb failure stress change during injection periods. On the other hand, the residual stress diffuses into the remote field after injection stops. This flow pattern suggests the necessity of numerical modeling and long-term monitoring, even after injection has stopped. We found that the time at which the Coulomb failure stress reaches the critical point greatly varies with the hydraulic and poroelastic properties (e.g., permeability and Biot-Willis coefficient) of the fault and injection layer. We suggest that an understanding of the detailed physical properties of the surrounding layer is important in selecting the injection site. Our numerical results showing the surface displacement and deviatoric stress distribution with different amounts of fault slip highlight the need to test more variable fault slip scenarios.

• Korean Journal of Materials Research
• /
• v.33 no.1
• /
• pp.15-20
• /
• 2023

'Tracers' are bullets that emit light at the backside so that the shooter can see the trajectory of their flight. These light-emitting bullets allow snipers to hit targets faster and more accurately. Conventional tracers are all combustion type which use the heat generated upon ignition. However, the conventional tracer has a fire risk at the impact site due to the residual flame and has a by-product that can contaminate the inside of the gun and lead to firearm failure. To resolve these problems, it is necessary to develop non-combustion-type tracers that can convert heat to luminance, so-called 'thermoluminescence (TL)'. Here, we highly improve the thermoluminescence properties of MgB₄O₇ through co-doping of Dy³⁺+Ce³⁺ and Dy³⁺+Na⁺. The presence of doping materials (Dy³⁺, Ce³⁺, Na⁺) was confirmed by XPS (X-ray photoelectron spectroscopy). The as-synthesized co-doped MgB₄O₇ was irradiated with a specific radiation dose and heated to 500 ℃under dark conditions. Different thermoluminescence characteristics were exhibited depending on the type or amounts of doping elements, and the highest luminance of 370 cd/m² was obtained when Dy 10 % and Na 5 % were co-doped.

• Korean Journal of Environmental Agriculture
• /
• v.41 no.4
• /
• pp.355-364
• /
• 2022

BACKGROUND: Pre-harvest interval and decline pattern of thiamethoxam were determined in kiwifruit using liquid chromatography-tandem mass spectrometry (LCMS/MS). The study was carried out to propose import tolerance using OECD maximum residue limit (MRL) calculator for the export promotion of kiwifruit to Taiwan. METHODS AND RESULTS: The thiamethoxam residue in kiwifruit was determined by using the LC-TriQ-MS/MS with the analytical process to set up the import tolerance under greenhouse conditions for Taiwan. Excellent linearity was observed for all of the analytes with a determination coefficient (R²)≥0.99. The limit of quantification was determined to be 0.01 mg/kg for both thiamethoxam and clothianidin in kiwifruit. Linearity was determined from the co-efficient of determinants (R²) obtained from the seven-point calibration curve. The standard calibration curve showed as follows; 1) Site 1 (Gimje): y = 944,406X + 1,583 (R²=0.9995), 2) Site 2 (Goheung): y = 1,356,205X + 934 (R²=0.9983), and 3) Site 3 (Jangheung): y = 1,239,937X - 3,090 (R²=0.9908). The residue of thiamethoxam in the kiwifruit for three decline trials showed the range of 0.35 to 0.56 mg/kg in site 1 (Gimje), 0.24 to 0.55 mg/kg in site 2 (Goheung), and 0.28 to 0.42 mg/kg in site 3 (Jangheung), respectively. However, clothianidin was not detected in all of the treatments. The maximum residual amounts (decline) in the samples, sprayed according to the safe-use standard for thiamethoxam 10% WG in kiwifruit (30 days before harvest, 3 sprays every 7 days) were 0.56 mg/kg in site 1, 0.55 mg/kg in site 2, and 0.42 mg/kg in site 3, respectively. CONCLUSION(S): The import tolerance (IT) of thiamethoxam for kiwifruit may be proposed to be 0.9 mg/kg by using the OECD MRL calculator.

• Journal of Applied Biological Chemistry
• /
• v.57 no.3
• /
• pp.267-277
• /
• 2014

Objective of this paper is to assess the available data on the pesticide uses and regulations in the golf courses, and provide the nationwide systematic management options. Numbers of golf courses in Korea are rapidly increasing from 2000s and reached at 421 sites by the end of 2011. Accordingly pesticide usage has been increased with years in direct proportion to the increasing number of golf courses. Amounts of pesticide applied in 2011 were 118,669 kg as of an active ingredient and were in the orders of fungicides (54.9%) > insecticides (24.4%) > herbicides (13.3%) > growth regulators (0.1%). Average pesticide usages in 2011 were 280.9 kg per golf course and $5.4kg\;ha^{-1}$. Frequencies of the residual pesticide detections in green and turf were higher than those in fairway and soil, respectively. Residue of highly toxic pesticides was not detected in golf courses. Ministry of Environment in 2010 has developed the 'golf course pesticide monitoring and management system' which is the advanced online registry for kind and amount of pesticides applied in each golf course. This system is intended for monitoring of the pesticide uses and residual levels and protecting the environmental pollution from pesticides in the golf course. In 2009, management of pesticides in the golf courses became the task of Ministry of Environment, being merged from many federal agency and ministries. The protocol for the site-specific best management practices, on which to base results from the risk assessment, should be set for pesticides in the golf to minimize the environmental impacts.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.479-495
• /
• 2018

This study was carried out to research the multimedia fate modeling, concentration distribution and impact assessment of polycyclic aromatic hydrocarbons (PAHs) emitted from automobiles, which are known as carcinogenic and mutation chemicals. The amount of emissions of PAHs was determined based on the census data of automobiles at a target S-city and emission factors of PAHs, where multimedia fugacity modeling was conducted by the restriction of PAHs transfer between air-soil at the impervious area. PAHs' Concentrations and their distributions at several environmental media were predicted by multimedia fugacity model (level III). The residual amounts and the distributions of PAHs through mass transfer of PAHs between environment media were used to assess the health risk of PAHs at unsteady state (level IV), where the sensitivity analyses of the model parameter of each variable were conducted based on Monte Carlo simulation. The experimental result at S-city showed that Fluoranthene among PAHs substances are the highest residual concentrations (60%, 53%, 32% and 34%) at all mediums (atmospheric, water, soil, sediment), respectively, where most of the PAHs were highly accumulated in the sediment media (more than 80%). A result of PAHs concentration changes in S-city over the past 34 years identified that PAHs emissions from all environmental media increased from 1983 to 2005 and decreased until 2016, where the emission of heavy-duty vehicle including truck revealed the largest contribution to the automotive emissions of PAHs at all environment media. The PAHs concentrations in soil and water for the last 34 years showed the less value than the legal standards of PAHs, but the PAHs in air exceeded the air quality standards from 1996 to 2016. The result of this study is expected to contribute the effective management and monitoring of toxic chemicals of PAHs at various environment media of Metropolitan city.

• The Korean Journal of Pesticide Science
• /
• v.10 no.2
• /
• pp.99-106
• /
• 2006

Chlorothalonil and imidacloprid sprayed onto the green peppers were degraded more faster at outdoor than in greenhouse. These results were affected by dew and photodegration, considering no rain during the experimental period. Chlorothalonil, esfenvalerate and imidacloprid in green pepper, green twist pepper and sweet pepper did not show any residual pattern, because green peppers are one of the continuous harvesting crops and pesticides could not be sprayed homogeneously on them. When green peppers were pickled with soy sauce and green twist peppers were fried with vegetable oil, the amounts of pesticides such as alpha-cypermethrin, bifenthrin, chlorfenapyr, esfenvalerate and imidacloprid were diminished to the levels of about $30{\sim}71$ and $20{\sim}41%$, respectively. Esfenvalerate and imidacloprid could not be detected in 2 month-old hot pepper paste. The removal rates of pesticide residues in leaves of green peppers were about $22{\sim}37%$ by washing, about $74{\sim}95%$ by parboiling, and about $17{\sim}55%$ by drying after parboiling.

• The Korean Journal of Pesticide Science
• /
• v.11 no.3
• /
• pp.154-163
• /
• 2007

In order to elucidate the residual characteristics of some pyrethroid insecticides commonly used for Korean cabbage, such as bifentbrin, lambda-cyhalothrin and deltametbrin, the test pesticides were sprayed onto the crop at recommended rate and doubled rate of the recommendation. Their detection limits were 0.004 mg $kg^{-1}$ and mean recoveries at the fortification levels of 0.04 and 0.2 mg $kg^{-1}$ were from 95.16 to 99.32 and from 86.81 to 103.73%, respectively. Half-lives were from 2.5 to 3.6 at the recommended rate and from 2.3 to 3.9 days at the doubled rate of the recommendation. Initial residue amounts of bifenthrin and lambda-cyhalothrin at the recommended rate and doubled rate of recommendation and of deltamethrin at the recommended rate were less than their MRL, whereas, in case of deltamethrin sprayed at doubled rate of the recommendation, the residue level exceeded its MRL. However, the residue levels of the pesticides in the crop sampled at harvest were less than their maximum residue levels and the ratios of the estimated daily intake (EDI) to acceptable daily intake (ADI) for the pesticides tested calculated from the residue data at harvest were less than 7%, suggesting that these pesticides would be safe for Korean cabbage from the residue concern.