• 제목/요약/키워드: residential energy use

검색결과 155건 처리시간 0.026초

분산형 전원으로서의 집단에너지사업 열병합발전의 송전망 피해 회피편익 추정 (Measuring the benefits from integrated energy business-based combined heat and power plant as a decentralized generation source with a focus on avoiding the damages caused by large-scale transmission facilities)

  • 김효진;최효연;유승훈
    • 에너지공학
    • /
    • 제24권3호
    • /
    • pp.67-73
    • /
    • 2015
  • 유연탄 및 원자력과 같은 기저 발전원은 대부분 수요지와 떨어진 곳에 위치해 있어 대규모 송전시설을 필요로 하는데, 이러한 송전시설은 다양한 사회적 비용을 야기하고 있다. 반면에 집단에너지사업 열병합발전과 같은 분산형 전원은 주로 수요지 인근에 설치되어 대규모 송전시설을 필요로 하지 않기에 송전시설로 인한 피해를 회피하는 편익을 창출한다. 이에 본 논문에서는 분산형 전원의 송전망 피해 회피편익을 추정하고자 한다. 이를 위해 무작위로 추출된 전국 1,000 가구를 대상으로 조건부 가치측정법을 적용한다. 보다 구체적으로는, 현재 발전량 비중이 가장 큰 유연탄 화력발전을 통해 생산된 전력을 분산형 전원인 집단에너지사업 열병합발전을 통해 생산된 전력으로 교체하여 사용하는 것에 대한 일반 국민의 지불의사액을 추정한다. 분석결과 유연탄 화력발전 대비 집단에너지사업 열병합발전의 송전망 피해 회피편익은 41.4(원/kWh)로 추정되었으며 유의수준 1%에서 통계적으로 유의하였다. 이 값은 2014년 기준 주택용 전력 평균가격의 33%에 해당하는 값으로 분산형 전원으로서의 집단에너지사업 열병합발전의 외부편익이 작지 않음을 시사한다.

아파트단지 외부공간의 친환경적 설계지침 적용특성에 관한 연구 - 김포 한강 신도시 아파트 건설공사 턴키(turn-key) 안을 중심으로- (A Study on the Application Characteristics of Environment-Friendly Design Guidelines at Outdoor Spaces in Apartment Complexes - Focused on Turn-Key Projects of Han River New Town Construction -)

  • 한수애;김신원
    • KIEAE Journal
    • /
    • 제11권5호
    • /
    • pp.97-106
    • /
    • 2011
  • This study has been conducted focusing on the analysis of the turn-key proposal for Gimpo-Han River New City. The study expected that it would come up with design trends and introduction properties of each plan for the eco-friendly development of an apartment house. The concept of environment-friendly design was thought in four parts: 'Land use and transportation,' 'Ecological environment', 'Energy resource and environmental impact' and analysis factors of each part were chosen by specific items from the prospective researches and guidelines that already given on the projects. In conclusion, a proper development of the environmental-friendly apartment house will not be achieved unless the designers try to overcome their prejudice against eco-friendly planning elements applications. Along with the designers' attempt, it is also necessary to review the evaluation articles of the certification system for the existing environmental-friendly structures as well as to compensate and establish detailed evaluation standards. As the problems are being worked on, an integrated, effective evaluation standard for the eco-friendly planning elements will be determined. This way, an environmental-friendly residential development with a better quality will be eventually realized.

주거단지 지하주차장의 조명계획 및 운영방법 (A Lighting Plan and Operation Strategy for Underground Parking Garages in Residential Areas)

  • 장수정;최안섭
    • 조명전기설비학회논문지
    • /
    • 제19권4호
    • /
    • pp.47-54
    • /
    • 2005
  • 어둡고 한정된 지하공간의 이미지의 개선은 지하개발 성공여부에 중요한 결정요소가 되고 있다. 주거단지 지하주차장의 조명환경은 지금까지 양적 위주의 설계와 운영이 이루어졌으나 이제는 지하주차장 공간의 질적 향상이 필요한 때이다. 이를 위해서 우선 고려해야 할 두 가지는, 첫째로 주차장에서 주로 사용되는 광원에 대한 이해이며, 둘째는 균제도의 향상이다. 특히 겨울철 외기의 영향에 의한 주차장 실내의 심각한 조도저하와 균제도의 유지를 위한 방안이 마련되어야 한다. 따라서 조명기구의 간격, 배열에 대한 변화가 필요하며, 운용에 있어서는 시간에 따른 일률적인 기존의 제어방법에서 벗어나 이용패턴을 고려한 방식으로의 전환이 요구된다.

환경친화.자원절약형 농촌마을 계획기술 및 배치모델 연구 (The Planning Techniques and Layout Models of Sustainable Rural Villages)

  • 임승빈;신지훈;윤희정
    • 농촌계획
    • /
    • 제9권1호
    • /
    • pp.1-9
    • /
    • 2003
  • This study intends to select the planning techniques and develop the layouts of environmentally friendly rural villages. As the results of this study, the planning techniques of rural villages are as follows: (1) Development of agricultural technology(organic farming), (2) Environmentally friendly layout considering natural energy, conservation of natural landscape and ecosystem, and sewage and rainwater, (3) Community restoration considering joint work, economic interchange between urban people and rural residents, and unity of rural resident's opinion, and (4) Activation of rural tourism considering satisfaction of tourists, conservation of ecological and cultural resources, and resident's income increasement. According to these 4 techniques, this study also developed 4 general models: (1) land-use and flow, (2) green and blue networks, (3) networks of ecological and cultural resources, and (4) finally residential model, divided rural villages into 2 types. Therefore when we develop a countryside, we can apply to these models, considering the current ecological and cultural resources conditions.

공동주택의 급탕부하 지속시간 및 부하 패턴에 관한 실증연구 (An Empirical Study of Hot Water Supply Patterns and Peak Time in Apartment Housing with District Heating System)

  • 김성민;정광섭;김영일
    • 에너지공학
    • /
    • 제21권4호
    • /
    • pp.435-443
    • /
    • 2012
  • 세계는 원유재고 감소와 국제 정세의 불안정으로 인해 지속적으로 상승하고 있는 유가와 화석연료 사용으로 인한 환경오염에 관심이 고조되고 있다. 국내의 경우 원유를 100% 수입하고 있으며, 사용되고 있는 에너지의 에너지원 중 97%를 수입에 의존하고 있기 때문에 유가 상승에 따른 영향은 더욱 민감하게 나타난다. 국내에 수입되고 유통되는 에너지의 97% 중 1/3 이상이 사무소나 주거용 난방, 급탕 및 취사용으로 사용되고 있다. 이에 따라 정부는 물론 산업체, 연구소 등에서 사무소 및 주거용 에너지 소비패턴으로 인한 경제적인 부담을 줄이고, 고효율 저에너지 기술개발을 통해 소비에너지를 절약함과 동시에 탄소배출을 억제하는 신기술에 대한 연구가 활발하게 이루어지고 있다. 우리나라는 국토가 좁은 반면 인구밀도가 높고, 인구의 도시집중화로 공동주택의 주거비율이 높은 추세이기 때문에 최근 공동주택단지는 초고층화, 대형화가 되고 있으며, 이로 인해 급수 급탕에 대한 사용패턴도 변화하고 있다. 하지만 현재 급수 급탕에 대한 설계 자료는 대부분 외국의 설계 기준과 현장 경험치에 의해 산출된 데이터에 의존하고 있으며, 사용실태에 대한 기초자료가 부족한 실정이며, 이로 인해 급수 급탕 설비 설계 시 과대 또는 과소 설계가 되는 문제가 발생하고 있다. 본 연구에서는 공동주택의 공급자 측 급탕 열 공급환경과 사용자측 열사용량을 측정하여, 급탕부하가 발생하는 시간과 사용 실태 및 패턴을 파악함으로써, 효율적인 공급자 측 급탕설비 설계와 관리를 위한 기초자료를 제시하고자 한다.

왕겨연소기(燃燒機)의 성능(性能)에 영향(影響)을 마치는 설계(設計) 및 작동인자(作動因子)에 관(關)한 연구(硏究) (The Effects of Operational and Mechanical Factors on the Performance of Rice-Husk Furnace)

  • 박승제;노상하
    • Journal of Biosystems Engineering
    • /
    • 제8권2호
    • /
    • pp.39-48
    • /
    • 1983
  • This study was performed to obtain the basic data which could be used for the modification of the manual center-burner-type rice-husk furnace into a small scale automatic type for the multi-purpose use in the farm. For this purpose, first, the utilization feasibility of the rice-husk furnace in the farm was analyzed briefly in aspects of available amount of rice-husk for the fuel, annual operation time and replaceble amount of residential heating energy with rice-husk in the farm. For the experiment a prototype furnace geared with an automatic feeding device was fabricated, and feed rate, mold size and chimney height were changed to investigate the combustion efficiency of rice-husk and thermal efficiency of the furnace. Also, optimum and limiting operational factors were observed in each treatments. The results obtained are summarized as follows. 1. If the rice-husk is intensively used for residential heating in the farm for winter season, on an average 51 percent of the total heating energy can be replaced with the rice-husk. Therefore, development of a small scale automatic rice-husk furnace was recognized to be feasible. 2. The operational condition depending on husk-feed rates was very important factor for successive steady burning operation of the given furnace. When the feed-rate was 1.5 kg/hr, the top of the burning zone should be kept at the position about 55 cm from the bottom of the combustion chamber with the periodic removal of ash (termed as steady state position), which was 18 cm above the mold waist. When the feed rates were 2.4 kg/hr and 3.0 kg/hr, the steady state position was at about 4 cm above the mold waist. 3. The mold size affected inflow rate of air into the furnace and consequently CO content in the exhaust gas. The relatively bigger mold gave positive effect on the air-inflow rate. 4. When the husk-feed rates were 1.5 kg/hr, 2.4 kg/hr, 3.0 kg/hr, the combustion efficiencies of the rice-husk were 98.5%, 97.4% and 95.0%, the thermal efficiencies of the furnace were 93.4%, 93.2% and 87.6%, and CO content in the exhaust gas were 1.21%, 1.03%, and 2.43%, respectively. The air-inflow rates were decreased with the increase of feed rates. When the amount of excess air was 30-40%, the CO content in the exhaust gas was at the minimum level. 5. When the chimney height was lowered from 260 cm to 96 cm, the air-inflow rate was slightly decreased, but the average temperature in the combustion chamber, CO content in the exhaust gas and combustion and thermal efficiencies were not changed significantly. 6. The incidental problems associated with the protytype furnace were accumulation of the ash inside the mold, accumulation of the cinder between the outer-drum of the furnace and the combustion chamber wall, and accumulation of the cinder in the chimney.

  • PDF

1990년대 대구의 신도시화 과정과 도시정책 (The New Urbanization Process and Urban Policy of Daegu in the 1990s)

  • 김순천;최병두
    • 한국지역지리학회지
    • /
    • 제9권4호
    • /
    • pp.461-480
    • /
    • 2003
  • 본 논문은 대구를 사례로 신도시화 과정을 경제, 정치, 사회문화, 환경 그리고 공간적 측면으로 나누어 고찰하였다. 경제적으로 대구의 산업구조는 제조업 중심에서 서비스산업으로 바뀌었으며, 산업의 특화정도는 조립금속과 정밀 광학분야의 비중이 높아지고 있으나 여전히 섬유산업위주의 단선적 산업구조의 틀을 벗어나지 못하고 있다. 정치적으로 지방자치제의 실시로 지역 간의 경쟁이 첨예해지는 상황에서, 대구 지방정부는 전반적으로 지역여건을 성장주의적 분위기로 이끌어가면서, 약화되는 지역 투자나 생산기능을 확충하기 위해 민 관 학의 연계체계를 구성하여 지역의 현안 문제를 해결하는 경향을 보이고 있다. 사회적으로 구도시 체제에서는 대규모 하드웨어 시설에 많은 투자를 하였으나 신도시 체제에서는 사회문화적 소프트웨어시설에 많은 투자를 하게 되었다. 문화적으로는 기존의 축제가 행정 편의적이고 가시적 축제였다면, 현재의 축제는 시민들과 함께 할 뿐만 아니라 지역경제 활성화에 도움을 주는 축제로 변하고 있다. 환경적으로 지방자치제가 본격적으로 시작되면서 산업기반시설과 혐오시설의 입지로 인해 지방자치단체간의 가치 및 이해관계를 둘러싼 갈등문제가 심각하게 표출하고 있다. 마지막으로 신도시화 과정에서 주거팽창과 공간구조의 불균형적 이용은 토지이용의 비효율성을 야기하고 있다. 이런 무계획적인 도시의 외연적 확산은 직주분리와 사람들의 이동의 필요성을 증대시켰으며 이는 에너지 과소비적 도시공간구조를 가져왔다.

  • PDF

컴팩트형 공간구조가 대중교통수단의 이용활성화에 보다 효과적인가? (Is Compact Urban Spatial Structure Effective for Public Transportation Mode?)

  • 이재영;김영철
    • 대한교통학회지
    • /
    • 제22권3호
    • /
    • pp.7-16
    • /
    • 2004
  • 본 연구는 도시공간구조와 통행행태 및 접근성 분석을 통하여 어떠한 형태의 도시구조가 대중교통의 활성화에 보다 적합한지를 모색하는 데 목적이 있다. 분석대상도시는 한국과 일본의 도시를 대상으로 하였으며 지구(district) 수준에까지 분석의 범위를 좁힘으로써 연구결과의 적용성을 높이고자 하였다. 비교분석구조로서 각 나라 및 도시에서 각각 컴팩트형도시 및 분산형도시, 고밀지구 및 저밀지구를 설정하였고, 통행행태분석은 로짓모형을 이용하였다. 또한 접근성지표(CAI)를 이용하여 주거공간분포에 따른 대중교통에의 접근성을 분석하였다. 분석결과, 첫째, 고밀도시 및 지구의 거주자가 보다 짧은 통근거리를 나타냈다. 둘째, 통근통행에 있어서 저밀지구의 거주자들이 훨씬 더 높은 자가용승용차의 이용율을 보이는 나타났다 셋째, 고밀도시에서 자가용승용차의 시간 및 비용에 대중교통의 교차탄력성이 저밀도시보다 큰 것으로 나타났다. 넷째, 접근성지표(CAI)의 분석결과, 대중교통으로의 접근성은 단순한 주거밀도보다는 밀도의 공간분포와 더 깊은 관련성을 갖는 것으로 나타났다.

중.고층 주상복합 R/C 건축물의 단차형 내부 보-기둥 접합부 내진성능평가 (Seismic Performance Evaluation of R/C Different Floor Type Interior Beam-Column Joints in the Middle and High-rise Mixed-use Residential Building)

  • 하기주;신종학;허민행;홍건호;하재훈;남영식
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
    • /
    • pp.453-454
    • /
    • 2009
  • 본 연구에서는 중 고층 철근콘크리트 주상복합형 건축물에서 지진하중과 같은 반복하중이 작용할 때 단차형 내부 보-기둥 접합부의 거동 특성을 파악하기 위하여 단차 유무에 따른 내부 보-기둥 접합부 실험체를 대상으로 실험을 실시하여 다음과 같은 결론을 얻었다. 단차가 있는 내부 보-기둥 접합부 실험체는 단차가 없는 표준실험체(FJ-0D)와 비교하여 단차 수준(1.0D, 2.0D)이 증가함에 따라 수평내력과 에너지소산능력이 증가하였고 내부 보-기둥 접합부 영역을 중심으로 균열진전 상황이 상이하였다. 또한 에너지소산능력은 내부 보-기둥 접합부 단차가 높을수록 1.1${\sim}$1.35배 증가하였다.

  • PDF

친환경 건축물 단열재 최근 연구 동향 (Recent Research Trends for Green Building Thermal Insulation Materials)

  • 박종문;김동환;서동진
    • 청정기술
    • /
    • 제18권1호
    • /
    • pp.14-21
    • /
    • 2012
  • 친환경 건축물에 사용되는 미네랄울, 폴리우레탄 등 전통적인 단열재로부터 최근에 주목받고 있는 VIP (Vacuum Insulation Panel), 에어로젤, 그리고 미래기술로 연구되고 있는 VIM (Vacuum Insulation Material), DIM (Dynamic Insulation Material) 등 단열재 및 단열 시스템의 특성과 장단점을 비교하였다. 매우 낮은 열전도율을 지닌 VIP 및 에어로젤은 기존 단열재에 비해 에너지 소모를 줄일 수 있으므로 주거면적을 크게 확대할 수 있는 장점이 있으며, 특히 에어로젤은 반투명 및 투명재질로 만들 수 있어 건물에 응용될 수 있는 가능성이 매우 크다. 단열재는 낮은 열전도율뿐만 아니라, 건설현장 응용성, 기계적강도, 내화성, 비용 및 환경영향 등을 고려하여야 하므로, 전통적인 단열재 및 최신 단열재를 활용하고 지속적으로 개선시키는 노력을 해야 할 것이다.