• Journal of Environmental Health Sciences
• /
• v.24 no.2
• /
• pp.1-8
• /
• 1998

This study was carried out to investigate the distribution of PAHs in atmosphere and soil, and their relationship, accumulation tendency in soil, and its contain burden ratio (%) the PM$_{10}$ and soil were sampled adjacent to a roadside and analysed by HPLC from August 25th 1996 to September 22nd 1996 in Seoul and Kunggido area. The main results are summarized below 1. The concentration of PM$_{10}$ in the ambient air was showed in order of industrial region ($142.70\pm 21.77 \mu g/m^3$), commercial region ($136.51\pm 31.62 \mu g/m^3$), residential region ($110.12\pm 14.98 \mu g/m^3$), greenbelt region ($77.44\pm 12.12 \mu g/m^3$), respectively. 2. Distribution of PAHs concentration level in PM$_{10}$ and soil was showed in order of industrial region, commercial region, residential region, greenbelt region, respectively in all components. 3. The contain burden ratio (%) in PM$_{10}$ was attested that BbF was the highest contain burden component (21.7-32%) and An was the lowest contain burden component (0.35-1.95%) in all region. 4. The contain burden ratio (%) in soil was attested that Pb (20.5%) was the highest and An (0.8%) was the lowest contain burden component in industrial region and BbF (21.9%) and An (0.45%) were the same tendency in commercial region and Py (21.6%) and BkF (3.5%) were in residential region, Py (29%) and An (2.6%) were in greenbelt region. 5. The relationship between concentration of PAHs in PM$_{10}$ and soil was attested that the component of BbF (r=0.514) was very highly correlated, and there were significant in Fl and BaA in soil between industrial region and commercial region (P<0.05).

• Journal of the Korean housing association
• /
• v.27 no.6
• /
• pp.19-29
• /
• 2016

As a lifeway and social change, the neighborhood build up around elementary school based on Perry's Neighbourhood Unit becomes change. Elementary School does not function as a center of residents' activity or community any longer. Activities occurred near the school move to the community streets that many facilities are distributed to, while utilization of facilities near schools becomes lower. On the bases of the current states, this study aims to draw a practical neighborhood center of residential areas by case study. The research is being mainly about low-rise residential areas in Seoul which includes one elementary school at least. In order to deduct the center of neighborhood, the survey takes two steps. At the preliminary survey, conduct the observation and do an interview to investigate awareness and actual status. Also to analyze practical center, do a main survey about land value, pedestrian volume, distribution of public transit and facility density. The research result shows that there is another activated center street not nearby elementary school in every case. This study assumes that the neighborhood center is not limited around elementary school and could variously build up by circumstances. It has significance that we present a question about the traditional theory and also could be references of the future city maintenance in the long term.

• Journal of the Korean Regional Science Association
• /
• v.6 no.2
• /
• pp.107-121
• /
• 1990

The structural change of occupational composition with the coming of post-industrial society is most evidently observed in the developed country. Specially representative of social changes is the emergence of new occupational sectors, such as the so-called quaternary and quinary sectors, which are based on the use of information technology and managerial skills. The paper raises the question of how and in what this chage of occupational components in a mtro area affects the existing residential structure over the period. In order to extend the discussion of the question, the related hypothetical statements on urban spatial impact due to transformation of the society have xtnsively considered and identified a possible multicenter structure concentration and deconcentration of new jobs and population over the metro area. For further examination, the renowned high tech city of Minneaplis -St. Paul has been selected and the occupational labour forces data for 1960 and 1980 analyzed. As a whole, this area has experienced a dispersal and reconcentration of population in new patterns which have resulted from changes in the occupational structure. In particular, the residential area of white-coller workers(the quaternary / quinary or information workers) has expanded into the city from a suburban core area. In this process, a large proportion of the manual-worker's residential areas in the central city either disappeared or diminished. Consequently, other isolated centers created by the manualworker residents are emerging in both the central city and suburbs. Thus, the development of mulitple centers or cores based on the distribution of occupational characteristics can be considered as a typical ongoing pattern of metro areas in the Unite States.

• Journal of Urban Science
• /
• v.8 no.1
• /
• pp.25-31
• /
• 2019

Infiltration affects indoor environmental and air quality and energy consumptions in buildings. Especially, airflow and the infiltration are more remarkable in high-rise buildings due to the air-driving forces (stack and wind effects). Thus, it is important to understand infiltration distributions in high-rise residential buildings. In this study, the weather-driven infiltration is characterized from the viewpoint of interactions between external wind and stack effect in high-rise residential buildings. To calculate accurately the annual infiltration distributions, this study also suggests an airflow and thermal simulation method with a two-step calibration of air-leakage data. The simulated results show (1) how the interaction between stack and wind effects induce infiltration types (outdoor and interzone air infiltration) and (2) how much the interzone air infiltration (being ignored in previous studies) occurs due to the stack effect, as well as the outdoor air infiltration rates.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.552-557
• /
• 2007

Due to the recent improvement of living standard of residential buildings, the requirements of the thermal comfort and energy saving in heating system have been raised. The radiant floor heating system has been widely used as a residential heating method, which has been modernized to use hot water running into the tubes embedded in the floor structure. The uniform flow distribution is very important factor for a radiant floor heating system such as a blood vessel system in human body. Therefore, it is necessary to investigate the operating characteristics to develop an optimal radiant floor heating system. In this study, numerical analyses were carried out, using a commercial CFD code, FLUENT, to obtain the velocity distribution under steady, three-dimensional, standard k-$\varepsilon$ model and no-slip condition. Results are graphically depicted with various parameters.

• KIEAE Journal
• /
• v.17 no.5
• /
• pp.33-41
• /
• 2017

Purpose: Indoor air quality in residential buildings needs to be evaluated over the long term. In previous research, there has been an attempt to perform the health risk assessment of pollutants by using numerical models as a method of long-term evaluation. However, the numerical model of this precedent study has limitations that do not reflect the actual concentration distribution. Therefore, this study introduces the CRPS index, constructs a numerical model that can reflect the concentration distribution, and then presents a more accurate health risk assessment method using it. At this time, the pollutants are toluene, which is a typical material released from building materials. Method: CRPS index was applied to existing numerical model to reflect concentration distribution. This was used to calculate concentrations at adult breathing area and to use them for exposure assessment in a health risk assessment. After that, we entered adult data and conducted a health risk assessment of toluene. Results: The non-carcinogenic risk of toluene was calculated to be 0.0060. This is 5% smaller than the existing numerical model, meaning that it is more accurate to predict the pollutant risks. This value is also lower than the US EPA reference value of 1. Therefore, under the conditions of this study, long-term exposure of adults to toluene has no impact on health.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.3
• /
• pp.229-235
• /
• 2011

Traffic noise pollution is a growing problem that highly affects the health of people in urban areas. In order to implement effective measures against traffic noise the noise mapping about its distribution is imperative. Urban traffic noise maps will help to establish the existing baseline so that we will be able to look for the effective way to control the noise. They will also let us see in an understandable and visual way how noise spreads from roads into residential areas. In this paper we considered three development types between roads and residential areas, and applied the interpolation of ArcGIS for noise attenuation with distance from the roads to find the noise level at the parcels positions in residential areas, and then generated the noise map using the interpolated results. Therefore we present results that the traffic noise level within residential areas exceed the national noise standard and also can estimate the noise level of individual parcels. These results can be used for traffic noise control planning or assessment of officially assessed land price in near future.

• Korean Journal of Environment and Ecology
• /
• v.25 no.4
• /
• pp.516-525
• /
• 2011

We studied the influence certain environmental factors (proximity of roosting site, roads, and residential areas) have on the spatial distribution of cranes in the Cheorwon, Korea. Using a range finder and GPS, data were collected from January to February 2007 and were subsequently evaluated with ArcGIS. The size of the cranes' wintering habitat was estimated to be 7$76.9km^2$. Five hundred and fifty-five flocks of cranes were observed and detailed distributions were collected. Feeding distribution of the cranes showed clustered distribution, however, no tendencies of spatial autocorrelation were apparent. Adjacent regions with paved roads and residences showed lower densities than other areas. Distances at which paved roads and residential areas induced changes in feeding flock densities were 1500m and 1750m, respectively. Feeding flock density decreased with increased distance from roosting site. Feeding flock density of the two crane species did not increase as distance from roads increased, however, the density of individuals showed a significant increasing tendency with increased distance from roads. In both species, density of feeding flocks and individuals significantly increased with increasing distance from residential areas. In Red-crowned Cranes, the density of feeding flocks and individuals significantly decreased with increasing distance from roosting site, however, in the case of White-naped Cranes, there was an even distribution in density of feeding flocks and individuals.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.1
• /
• pp.29-34
• /
• 2007

The input and output impedances in a low voltage distribution system is one of the most important matters for power line communication because from the viewpoint of communication, the attenuation characteristic of the high frequency signals is greatly caused by impedance mismatch during sending and receiving. The frequency range is from 1MHz to 30MHz. Therefore, this paper investigates the input and output impedances in order to understand the characteristic of high frequency signals in the low voltage distribution system between a pole transformer and an end user. For power line communication, the model of Korea's low voltage distribution system is proposed in a residential area and then the low voltage distribution system is set up in a laboratory. In the low voltage distribution system, S parameters are measured by using a network analyzer. Finally, input and output impedances are calculated using S parameters.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.4
• /
• pp.358-368
• /
• 2023

The fuel cell market is expected to grow rapidly. Therefore, it is necessary to scale up fuel cells for buildings, power generation, and ships. A multi-stack system can be an effective way to expand the capacity of a fuel cell. Multi-stack fuel cell systems are better than single-stack systems in terms of efficiency, reliability, durability and maintenance. In this research, we developed a residential fuel cell stack and system model that generates electricity using the fuel cell-photovoltaic hybrid system. The efficiency and hydrogen consumption of the fuel cell system were calculated according to the three proposed power distribution methods (equivalent, Daisy-chain, and optimal method). As a result, the optimal power distribution method increases the efficiency of the fuel cell system and reduces hydrogen consumption. The more frequently the multi-stack fuel cell system is exposed to lower power levels, the greater the effectiveness of the optimal power distribution method.