• Advances in concrete construction
• /
• v.10 no.1
• /
• pp.1-11
• /
• 2020

This study intends to produce an ultra-high performance fibre reinforced concrete (UHPFRC) made with hybrid fibres (i.e., steel and polypropylene). Compressive and tensile strength characteristics of the hybrid fibres UHPFRC are considered. A total of 14 fibre-reinforced composites (FRCs) with different fibre contents or types of fibres were prepared and tested in order to determine a suitable hybrid fibre combination. The compressive and tensile strengths of each concrete at 7 days were determined. The results showed that a hybrid mix of micro-polypropylene and steel fibres exhibited good compromising performances and is the ideal reinforcement mixture in a strong, cost-effective UHPFRC. In addition, maximum compressive strength of 167 MPa was achieved for UHPFRC using 1.5% steel fibres blended with 0.5% macro-polypropylene fibres.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.3
• /
• pp.312-319
• /
• 2015

The grinding and furbishing process as the finishing process for molds include the works such as the grinding, buffing, lapping and polishing among others. A finishing tool unit is applied to this finishing process for the burr, lapping, polishing and others of molds. A finishing tool unit can carry out the flexible machining, depending on the machining allowance for objects to be cut on the basis of the instrumental driving mechanism which enables the up, down, left and right floating, which is applied in link with the dedicated cutters and robot machining systems. This study selected the shape to increase the rotatory force of an impeller when air is discharged during the driving of a finishing tool unit, and reflected it to the impeller designing. In addition, the study analyzed each flow velocity and pressure distribution per air pressurization value and finally analyzed the rotating torque to suggest the optimal conditions in designing impellers.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.2
• /
• pp.87-91
• /
• 1997

In vitro grown microtubers of potato (cv Jaju) were used for introduction of herbicide resistance gene using bombardment with DNA-coated particles. The apical shoot-tip area of newly sprouted microtubers were intensively bombarded. After bombardment, microtubers were germinated and transplanted in a greenhouse. Northern blot analysis indicated that bar gene was expressed in two plantlets. After 5 weeks of growing, commercial herbicide Basta was sprayed to screen the resistant plants. All untransformed potato plants died after 7 days while two transgenic plants survived.

• Plant Biotechnology Reports
• /
• v.5 no.1
• /
• pp.89-103
• /
• 2011

Two rice varieties, viz. Nonabokra and Pokkali, have been evaluated for their responses to salinity in terms of some physiological and biochemical attributes. During the exposure to salinity (200 mM concentration of sodium chloride for 24, 48, and 72 h), a significant increase in sodium was recorded which was also concomitant with the changes of other metabolic profiles like proline, phenol, polyamine, etc. The protein oxidation was significantly increased and also varied between the two cultivars. The changes in activities of anti-oxidative enzymes under stress were significantly different to the control. The detrimental effects of salinity were also evident in terms of lipid peroxidation, chlorophyll content, protein profiles, and generation of free radicals; and these were more pronounced in Pokkali than in Nonabokra. The assessment and analysis of these physiological characters under salinity could unravel the mechanism of salt responses revealed in this present study and thus might be useful for selection of tolerant plant types under the above conditions of salinity.

• ETRI Journal
• /
• v.28 no.4
• /
• pp.506-508
• /
• 2006

A frequency selective surface (FSS), whose unit cell consists of a ternary tree loop loaded with a modified tripole, is proposed to block multiple frequency bands. Target frequency bands correspond to Korean personal communication services, cellular mobile communication, and 2.4 GHz industrial, scientific, and medical bands. Through the adjustment of inter-element and inter-unit cell gaps, and adjustment of the length of elements, we present an FSS design method that makes the precise tuning of multiple resonance frequencies possible. Additionally, to verify the validity of our approach, simulation results obtained from a commercial software tool and experimental data are also presented.

• Journal of applied mathematics & informatics
• /
• v.7 no.3
• /
• pp.925-940
• /
• 2000

The spatial spread of a disease in an SIRS epidemic model with immunity imparted by subclinical infection on a population has been considered. The incidence rate of infection and the rate of immunization are both of nonlinear type. The dynamics of the infectious disease and its endemicity in local and global sense have been investigated.

• Korean Journal of Veterinary Service
• /
• v.30 no.2
• /
• pp.243-249
• /
• 2007

The tube agglutination test has been used for bovine brucellosis diagnosis in Korea since middle 1950s. The reported high specificity was its value in eradication program. However, the reading of reaction mostly depends on personal experience, thus here we report a way to improve accuracy and uniformity of reading. The tube agglutination was conducted according to the protocol provided by Korean Ministry of Agriculture and Forestry. The intensity of reaction was measured by spectrophotometer. The relationship between turbidity and percentage clearing was generally in direct proportion and linear. The correspondent percent transmittance at 75, 50, and 25% clearing were 91, 82, and 73, respectively. Then, the degree of percentage of clearing at given international unit was measured. With about 1.5 unit of serum, the maximum percentage clearing was observed. The international unit showing 25, 50, and 75 percentage clearing were 0.61, 0.83 and 1.35, respectively. Based on the information obtained using international standard serum, the calculation of international unit of test serum was available. According to the protocol for bovine brucellosis diagnosis which provided by Korean Ministry of Agriculture and Forestry, the available range of detectable international unit was between 15 and 538. And the corresponding international units for suspicious case ranged between 42 and 127. Of the 35 sera from B abortus infected cattle, about half of them had more than 538 international units. Collectively, the reading of turbidity using spectrophotometer and application to international unit improved accuracy and uniformity of reading.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.6
• /
• pp.445-450
• /
• 1996

Gelatinase A is a member of the matrix metalloproteinases that play an important role in cancer invasion and metastasis. In the course of screening gelatinase A inhibitors from microbial sources, a fungal strain PT-262 showed a strong inhibitory activity. The strain was identified as Chaunopycnis alba on the basis of its morphological characteristics. The inhibitor was isolated from acetone extract of mycelial cake by sequential chromatographies on MCI-gel, Sephadex LH-20, and a reverse-phase HPLC column. The purified inhibitor was identified as pyridoxatin by its physico-chemical properties and spectroscopic analysis. Pyridoxatin is not a peptide analog and has cyclic hydroxamic acid moiety. It inhibited activated gelatinase A with an $IC_{50}$ value of 15.2 ${\mu}M$ using fluorescent synthetic peptide. It also had a strong cytotoxicity against human cancer cell lines in vitro. Furthermore, this compound inhibited DNA synthesis with an $IC_{50}$ value of 2.92 ${\mu}M$ in PC-3 prostate cancer cells by [$^3H$]thymidine incorporation assay.

• Ocean and Polar Research
• /
• v.24 no.4
• /
• pp.483-490
• /
• 2002

Detailed investigations on both submarine and subaerial volcaniclastic deposits around Dokdo were carried out to identify geomorphologic characteristics, stratigraphy, and associated depositional processes of Dokdo caldera. Dokdo volcano has a gently sloping summit (about 11km in diameter) and relatively steep slope (basal diameter is about 20-25 km) rising above sea level at about 2,270m. We found ragged, elliptical-form of Dokdo caldera with a diameter of about 2km estimated by Chirp (3-11 kHz) sub-bottom profile data and side scan sonar data for the central summit area of Dokdo volcano. We interpreted that the volcaniclastic deposits of Dokdo unconformably consist of the Seodo (west islet) and the Dongdo(east islet) formations based on internal structure, constituent mineral composition, and bedding morphology. The Seodo Formation mainly consisted of massive or inversely graded trachytic breccias (Unit S-I), overlain by fine-grained tuff (Unit S-II), which is probably supplied by mass-wasting processes resulting from Dokdo caldera collapse. The Dongdo Formation consists of alternated units of stratified lapilli tuff and inversely graded basaltic breccia (Unit D-I, Unit D-III, and Unit D-V), and massive to undulatory-bedded basaltic tuff breccias (Unit D-II and Unit D-IV) formed by a repetitive pyroclastic surge and reworking processes. Although, two islets of Dokdo are geographically near each other, they have different formations reflecting their different depositional processes and eruptive stages.

• Ocean and Polar Research
• /
• v.36 no.4
• /
• pp.383-394
• /
• 2014

The surface sediments from the manganese nodule exploration area of Korea in the Clarion-Clipperton fracture zone were investigated to understand the resource potential of and emplacement mechanism for rare earth elements (REEs). The sediments are categorized into three lithological units (Unit I, II and III from top to bottom), but into two groups (Unit I/II and Unit III) based on the distribution pattern of REEs. The distribution pattern of REEs in Unit I/II is similar to that of Post-Archean Australian Shale (PAAS), but shows a negative Ce anomaly and enrichment in heavy REEs (HREEs). In Unit III, the HREE enrichment and Ce anomaly is much more remarkable than Unit I/II when normalized to PAAS, which are interpreted as resulting from the absorption of REEs from seawater by Fe oxyhydroxides that were transported along the buoyant plume from remotely-located hydrothermal vents. It is supported by the PAAS-normalized REE pattern of Unit III which is similar to those of seawater and East Pacific Rise sediments. Meanwhile, the PAAS-normalized REE pattern of Unit I/II is explained by the 4:1 mixing of terrestrial eolian sediment and Unit III from each, indicating the much smaller contribution of hydrothermal origin material to Unit I/II. The studied sediments have the potentiality of a low-grade and large tonnage REE resource. However, the mining of REE-bearing sediment needs a large size extra collecting, lifting and treatment system to dress and refine low-grade sediments if the sediment is exploited with manganese nodules. It is economically infeasible to develop low-grade REE sediments at this moment in time because the exploitation of REE-bearing sediments with manganese nodules increase the mining cost.