• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1370-1376
• /
• 2015

Generally, an autotransformer(AT) feeding system consists of double tracks, up and down, with the trolley wire and feeder wire of the up and down tracks connected in the sectioning post(SP). Consequently, load current or fault current flows on two tracks based on catenary impedance characteristics, making it difficult to estimate catenary impedance accurately. This paper presents a technique for the estimation of catenary impedance using boosting current compensation based on the current division characteristics of an AT feeding system to improve the operation performance of impedance relay. To verify the technique, we model an AT feeding system through a power analysis program (PSCAD/EMTDC) and simulate various operation and fault conditions. Through the simulation, we confirmed that the proposed technique has estimated catenary impedance with a similar degree of accuracy to the actual catenary impedance

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.8
• /
• pp.1355-1362
• /
• 2000

Microstrip antennas are attractive for many applications because of their compact size, low profile, and light weight. Recently, the demand for the miniaturization of the personal communication equipment has been increasing along with the proliferation of personal communication systems. Thus, the development of small antenna has been highly demanded. In this paper, a new technique to reduce the overall dimension of a microstrip antenna with a locally non-homogeneous substrate configuration is proposed. The miniaturized microstrip antenna for a repeater system in a mobile communication cellular band(824~894 MHz) is designed with the proposed technique, and commercialized with low cost, light weight, and small size. Comparison between simulations, based on Agilent Technologies HFSS software, and measurements are provided. The proposed method will be more attractive for a light-weight, small-size, and low-cost microstrip array design. This paper also presents the bandwidth improvement technique for under-coupled microstrip patch antenna with a tuning stub.

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1176-1180
• /
• 2021

The current study relates to RADAR (RAdio Detection and Ranging) application for level measurement of vitrified radioactive liquid nuclear waste. The vitrification of radioactive liquid waste is carried out in special equipment called 'Melters'. The study is directed towards the design and frequency modulation used in the level measurement of vitrified waste. More specifically, the RADAR design and frequency used for level measurement in a melter. This level measurement technique can also be used for dynamic vitrification process and can be used to measure the level variations without using any external medium/material and using only electromagnetic waves. Also, this technique is durable and accurate even under the high radioactive environment present inside the melter.

• Architectural research
• /
• v.11 no.2
• /
• pp.43-49
• /
• 2009

Since the late 1980s, the schedule technique applied to the construction industry around the world has rapidly changed from the traditional ADM (Arrow Diagramming Method) to the PDM (Precedence Diagramming Method) technique. The main reason for this change is to overcome the limits and inconveniences of the traditional ADM technique. The time-cost trade-off is one of the core scheduling techniques to establish the best optimized combination plan in terms of a relationship between the cost and schedule. However, most of the schedule-related textbooks and research papers have discussed and proposed applications of a time-cost trade-off technique based only on the Finish to Start relationship. Therefore, there are almost no consideration and discussion of problems or restrictions that emerge when the time-cost trade-off technique is applied to the PDM network that has overlapping relationships. This paper proposes the lead-time adjustment method as a methodology for overcoming some restrictions that are encountered when the time-cost trade-off technique is applied to the overlapping relationships of the PDM network.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.201-204
• /
• 1992

In the conventional load flow technique, it is assumed that the generator at the slack bus is used to supply the transmission losses and the change of power due to the generator outage. The assumption is not true in physical sense. This paper presents a new load flow technique that considers the governor-frequency characteristics and load-frequency characteristics and the technique is consistent with the actual power system phenomenon. This paper proposes an efficient methodology using sensitivity with the new technique for contingency analysis, which is used to calculate the line flows. Computational results of this technique applied to IEEE 14-bus system are presented.

• Electrical & Electronic Materials
• /
• v.7 no.1
• /
• pp.42-48
• /
• 1994

The preventive diagnosis technique for power system is being highlighted as a research area for deterioration of insulation in machinery because of high-voltage power system. We make efforts to develop not only diagnosis of aging state but also detection of defects in the initial stage from preventive diagnosis technique. Especially, partial discharge is actively studied as a non-destructive diagnosis technique and very useful because partial discharge measurement reduces damage than conventional diagnosis technique. The loaded stress during this test is smaller than that of other diagnosis techniques. But the continuous research for various complicated analysis method is required because partial discharge has very small signals and its signals have complex forms. In this paper, the measurement of partial discharge was investigated and studied on many specimens with void. We made samples having artificial voids and measured partial discharge. In order to use as a practical diagnosis technique, we studied ways of measurement, measured illustrations and types of partial discharge which could be used in order to diagnose defects of power machinery.

• Journal of Radiation Protection and Research
• /
• v.26 no.3
• /
• pp.275-279
• /
• 2001

In uranium enrichment plants and nuclear fuel fabrication facilities, exact measurement of fissile isotope enrichment of uranium is required for material accounting in international safeguards inspection as well as process quality control. The purpose of this study was to develop a simple measurement system which can portably be used at nuclear fuel fabrication plants especially dealing with low enriched uranium. For this purpose, a small size CZT (CdZnTe) detector was used, and the detector performance in low uranium gamma/X -rays energy range was investigated by use of various enriched uranium oxide samples. New enrichment measurement technique and analysis method for low enriched uranium oxide, so-called, 'semi-peak ratio technique' was developed. The newly developed method was considered as an alternative technique for the low enrichment and would be useful to account nuclear material in safeguarding activity at nuclear fuel fabrication facility.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.3
• /
• pp.208-223
• /
• 2014

Since the recent restoration of the Sungnyemun gate (South gate of Seoul) which was burnt down in 2008, there were dispute about the application of traditional technique for the conservation of cultural heritage. In this research, the definition of traditional technique for cultural heritage conservation is thought and mentioned. In general, the understanding of traditional technique is based on the idea of 'tradition'. Tradition is not defined as a 'eternal doctrine existence', but a 'development of succession' and a 'living existence'. Thus 'traditional performance and craft as intangible cultural heritage' is defined as 'intangible' which also makes it difficult to define the 'original form/state' from 'the conservation of the original form' which is a major principle of cultural heritage. In case of Korea, if the 'traditional technique as intangible cultural heritage' is put into application to cultural heritage conservation, the unclear definition will cause many problems in the restoration/conservation site. This is because the site will apply this technique without any discussion of the range and limitation of 'traditional technique'. This means there will be the lack of discussion for the conservation of the cultural heritage which will not have a strict criteria for the allowable range of usage for the 'traditional material' using the vaguely defined 'traditional technique'. In this study, these application issues of the traditional technique were also considerecl, comparing the development of international wnservation principles. As a result, the conservation of 'traditional technique as intangible cultural heritage' is important, but the 'technique left inside the tangible cultural heritage' which is the 'material which is carrying the technique when it was firstly built' has more importance to preserve and need to be in the major considerations.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.6
• /
• pp.687-695
• /
• 2002

Media-specific FEC techniques, suggested to confront with VoIP speech packet loss, improve speech quality at the expense of generating additional one-frame delay. In this paper, we suggest new media-specific FEC, i.e, LSF FEC technique which is able to improve speech quality with much shortened additional delay. In the proposed technique, the LSF parameters of the future frame are utilized to recover a lost packet. To evaluate performance of the proposed technique, we use ITU-T G.723.1 and G.729 Codec and apply Gilbert packet loss model and estimate MOS per every packet loss rate using PESQ speech quality estimation algorithm. The proposed technique has effect of shortening delay over from 6.5ms to 27ms compared with existing media-specific FEC techniques. Simulation results for comparison of reconstructed speech quality show this novel technique improves the MOS over 0.1 in practical lossy environment of 5 % packet loss rate.

• Journal of the Korea Furniture Society
• /
• v.27 no.2
• /
• pp.145-153
• /
• 2016

Today, furniture design, which is changing and diversified, a movement to search a new formative world while reviving our traditionality is continuously proceeded, that implies a new possibility in our culture. In respect of such diversified materials, Korean traditional paper, Hanji (韓紙), has already been acknowledged with its excellence. Also, Hanji is a material that fully contains aesthetic consciousness of Korean people, accordingly, this research investigated and analyzed mainly with Sarangbang furniture among Joseon antique furniture, in order to study the possibility of Hanji decorated furniture as the objet in our interior space. This research utilized Paper cut technique (剪紙技法) among Hanji Crafts technique of expressive elements of Sarangbang furniture using Hanji, which is to make patterns and attach them by cutting out or engraving colored papers using scissors or graver to the wooden frame (白骨). Through this, this research could investigate production process utilizing Paper cut technique, also, Sarangbang furniture utilizing such Paper cut could be settled down as the objet with functional aspect and aesthetic completion in our interior space. Also, the researcher presents value of our original furniture by suggesting final output and considers that systematic researches should be conducted continuously on furniture henceforth utilizing Paper cut technique.