• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1554-1560
• /
• 2019

Development of digital main control rooms (MCRs) has greatly changed operating environments by altering operator tasks, and thus the unique characteristics of digital MCRs should be considered in terms of human reliability analysis. Digital MCR tasks can be divided into primary tasks that directly supply control input to the plant equipment, and secondary tasks that include interface management conducted via soft controls (SCs). Operator performance regarding these secondary tasks must be evaluated since such tasks did not exist in previous analog systems. In this paper, we analyzed SC-related tasks based on simulation data, and classified the error modes of the SCs following analysis of all operational tasks. Then, we defined the factors to be considered in human reliability analysis methods regarding the SCs; such factors are mainly related to interface management and computerized operator support systems. As these support systems function to reduce the number of secondary tasks required for SC, we conducted an assessment to evaluate the efficiency of one such support system. The results of this study may facilitate the development of training programs as well as help to optimize interface design to better reflect the interface management task characteristics of digitalized MCRs.

• ETRI Journal
• /
• 제29권3호
• /
• pp.270-280
• /
• 2007

In Linux, real-time tasks are supported by separating real-time task priorities from non-real-time task priorities. However, this separation of priority ranges may not be effective when real-time tasks make the system calls that are taken care of by the kernel threads. Thus, Linux is considered a soft real-time system. Moreover, kernel threads are configured to have static priorities for throughputs. The static assignment of priorities to kernel threads causes trouble for real-time tasks when real-time tasks require kernel threads to be invoked to handle the system calls because kernel threads do not discriminate between real-time and non-real-time tasks. We present a dynamic kernel thread scheduling mechanism with weighted average priority inheritance protocol (PIP), a variation of the PIP. The scheduling algorithm assigns proper priorities to kernel threads at runtime by monitoring the activities of user-level real-time tasks. Experimental results show that the algorithms can greatly improve the unexpected execution latency of real-time tasks.

• 가족자원경영과 정책
• /
• 제8권2호
• /
• pp.15-26
• /
• 2004

This research evaluated counseling tasks performed by consumer counselors between Korea and Japan. Results of this research could be summarized as follows. First, not only female but also male counselors occupied counseling tasks in Korea, in Japan, all counselors were female, most of whom were married and older than in Korea. The average number of counselors in Korea was large than those in Japan, but income of counselors was higher in Japan. Average numbers of counseling were large, the level of perception on the significance of counseling tasks was lower in Korea, but degree of job satisfaction was higher in Korea than their Japanese counterparts. Second, evaluation scores of Korean counselors were higher than those in their Japanese counterparts in the light of objectiveness and fairness of counseling. On the other hand, the degree of job satisfaction among counselors and their perceptions on the significance of counseling tasks affected the evaluation scores. In contrast, both degree of job satisfaction and hours of job-training education generated those impacts. finally, Korean counselors highly evaluated their agencies' counseling tasks than their Japanese counterparts. In sum, this study showed that the overall performance of consumer counseling tasks was more positive in Korea than in Japan.

• Human Ecology Research
• /
• 제59권3호
• /
• pp.311-324
• /
• 2021

The purpose of this study was to reveal the effects of internal characteristics, such as fashion involvement, personality characteristics, and customer orientation of fashion brand salespeople on the core sales tasks, and how the core sales tasks and internal characteristics differ depending on differences in the way salespeople are remunerated. The data were collected as a questionnaire to fashion brand salespeople in Gwangju from September to October 2020. Using 235 responses, the data were analyzed with SPSS 21.0 for frequency analysis, reliability analysis, t-test, factor analysis, and regression analysis. The research results were as follows. First, fashion involvement comprises factors such as 'fashion passion and sense'and 'fashion trend interest', and the greater the 'fashion passion and sense', the better the 'sales management'and 'customer relationship management'jobs. Second, 'esthetic openness', 'responsibility' and 'extroversion' of the big five personality characteristics have a positive impact on 'sales management' and 'customer relationship management' tasks. Third, customer orientation comprises factors such as 'customer-centric understanding'and 'gain customer trust', the greater the customer-orientation, the better the 'sales management'and 'customer relationship management'tasks. Fourth, according to the position of the salesperson, the group of professional salespeople at manager level had high responses in core sales tasks, fashion involvement, customer orientation, and characteristics such as 'agreeableness', 'esthetic openness', and 'responsibility'.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제6권1호
• /
• pp.39-51
• /
• 2002

This study described an elementary teacher's practical knowledge of selecting and using mathematical tasks for promoting students' understanding and discourse. The informant of this ethnographic inquiry was a third grade teacher and has 10 years of teaching experience. According to the analysis of multiple data sources, this study showed that based on his beliefs about the development of understanding of mathematics and discourse, he continually employed two different types of tasks: open-ended tasks and tasks from students' mistakes and comments during discourse. Teachers' practical knowledge of teaching mathematics and the classroom norms for students' understanding and discourse are suggested to be given attention for further research on this area.

• 한국경영과학회지
• /
• 제18권2호
• /
• pp.1-22
• /
• 1993

This paper deals with the problem of mixed model assembly line balancing. In mixed model assembly lines, tsks should be assigned to stations in such a manner that all stations have approximately the same amount of work on a production cycle basis. Further in balancing assembly lines, the related tasks, the performing task side and the team tasks should be considered to improve work methods, to give more job satisfaction to workers, and to allow greater flexibility in the design of assembly lines. In this paper, the heuristic dispatch assignment rule is developed to assign evenly tasks of each model to all stations. The heuristic method based on the assignment rule developed is presented for mixed model assembly line balancing with the considerations of the related tasks, the performing task side, and the team tasks. The proposed method is analyzed, and compared with other methods for line balancing.

• Nuclear Engineering and Technology
• /
• 제42권1호
• /
• pp.115-124
• /
• 2010

According to wide-spread experience in many industries, a procedure is one of the most effective countermeasures to reduce the possibility of human related problems. Unfortunately, a systematic framework to evaluate the complexity of procedural tasks seems to be very scant. For this reason, the TACOM measure, which can quantify the complexity of procedural tasks, has been developed. In this study, the appropriateness of the TACOM measure is investigated by comparing TACOM scores regarding the procedural tasks of high speed train drivers with the associated workload scores measured by the NASA-TLX technique. As a result, it is observed that there is a meaningful correlation between the TACOM scores and the associated NASA-TLX scores. Therefore, it is expected that the TACOM measure can properly quantify the complexity of procedural tasks.

• 대한수학교육학회지:수학교육학연구
• /
• 제23권3호
• /
• pp.353-371
• /
• 2013

본 연구에서는 예비중등교사들이 2007 개정 교육과정에 따른 수학 교과서에서 제시하고 있는 문제의 수준 및 특성을 어떻게 이해하고 있으며, 교육과정의 성격과 수업 목표 등에 적합한 문제를 어떻게 선별하고 변형하는지 알아보았다. 그 결과, 많은 예비교사들이 Procedures Without Connections[PNC] 문제를 high-level 문제로 인식하고 있으며, 교육과정의 성격과 수업 목표 등에 부합하는 문제를 제대로 선별한 인원이 전체 예비교사의 절반 이하였다. 또한 대부분의 예비교사는 낮은 인지적 노력수준의 문제를 높은 수준의 문제로 변형하는데 어려움을 느끼는 것으로 나타났다.

• 대한간호학회지
• /
• 제42권7호
• /
• pp.1027-1038
• /
• 2012

Purpose: This study was done to analyze the job of clinical research coordinators (CRCs). Methods: Through the "developing a curriculum (DACUM)" workshop, the definition of CRCs' role was described and CRCs' duties and tasks were identified. Finally, the developed duties and tasks were validated for importance, difficulty, and frequency. Results: A CRC is defined as the one who coordinates and performs tasks related to clinical research/trials among investigators, participants, and sponsors according to the Good Clinical Practice at institutions conducting clinical trials. Twelve duties and 78 tasks were identified on the DACUM chart which represented the importance, difficulty, and frequency of tasks represented as A, B, and C respectively. Based on determinant coefficient (DC) of the task, the highest ranked task was confirming the eligibility of participants for research (DC=8.03) and the lowest was inventory management for clinical study materials (3.95). Conclusion: In this study, the job of a CRC was analyzed through the DACUM process and it was found that CRCs were doing various duties and tasks. Based on these results, it is suggested that it is necessary to develop CRC education programs considering the career ladder of CRCs.

• International Journal of Safety
• /
• 제3권1호
• /
• pp.38-46
• /
• 2004

This paper introduces the software life-cycle V&V (verification and validation) tasks for the KNICS (Korea nuclear instrumentation and control system) project. The objectives of the V&V tasks are mainly to develop a programmable logic controller (PLC) for safety critical instrumentation and control (I&C) systems, and then to apply the PLC to developing the prototype of an engineered safety features-component control system (ESF-CCS) in nuclear power plants. As preparative works for the software V&V, various kinds of software plans and V&V task procedures have been developed according to the software life-cycle management. A number of software V&V tools have been adopted or developed to efficiently support the V&V tasks. The V&V techniques employed in this work include a checklist-based review and inspection, a requirement traceability analysis, formal verification, and life-cycle based software testing.