• 대한의용생체공학회:의공학회지
• /
• 제32권3호
• /
• pp.264-269
• /
• 2011

To increase therapeutic efficiency and biological safety, it is important to precision control of acoustic output for therapeutic ultrasound equipment. In this paper, the electro-acoustic radiation conductance, one of electroacoustic characteristics of therapeutic ultrasound equipment, was measured by the radiation force balance method according to IEC 61161 standards and the acoustic output was estimated using the electro-acoustic radiation conductance. The estimation of acoustic output was conducted to continuous wave mode and pulse wave mode of duty cycle between 20% and 80%. The differences between prediction values and measurement results are within 5% of measurement uncertainty, which is a reasonably good agreement. The results show that acoustic output controlled by electro-acoustic radiation conductance was found to be an effective method.

• 한방안이비인후피부과학회지
• /
• 제27권2호
• /
• pp.33-50
• /
• 2014

Objective : The purpose of this study is to analyze research trends on laser output used for treatment of hair loss. Methods : We searched papers using Pubmed, NDSL, KISS, and RISS. First search used the keyword "Laser, Alopecia" in Pubmed. Inclusion criteria were last 15 years, English, related to output. Finally we searched papers using the keyword "Laser and Alopecia" in NDSL, KISS, and RISS. Inclusion criteria were the same as first research except for English. Results : A total of 43 studies were found, 28 studies were excluded and 15 studies were selected and analyzed. And of the 15 studies, 7 studies were foreign papers and 8 studies were domestic papers on clinical application of laser status. Mainly Used type of laser was a diode laser. As a result, we found that treatment group had more improvement than control group. The range of the laser-output was 1mW-150W in Alopecia laser therapy. Conclusions : Low-level (LLLT) as well as High-level laser therapy (HLLT) can be effectively used as an alternative to the treatment of alopecia. Thus, further attention and studies are needed on this topic in order to reduce the side effects and demonstrate the effectiveness clearly.

• ETRI Journal
• /
• 제38권5호
• /
• pp.972-980
• /
• 2016

An ultra-wideband microwave monolithic integrated circuit high-power amplifier with excellent input and output return losses for phased array jammer applications was designed and fabricated using commercial $0.25-{\mu}m$ AlGaN/GaN technology. To improve the wideband performance, resistive matching and a shunt feedback circuit are employed. The input and output return losses were improved through a balanced design using Lange-couplers. This three-stage amplifier can achieve an average saturated output power of 15 W, and power added efficiency of 10% to 28%, in a continuous wave operation over a frequency range of 6 GHz to 18 GHz. The input and output return losses were demonstrated to be lower than -15 dB over a wide frequency range.

• ETRI Journal
• /
• 제15권2호
• /
• pp.35-51
• /
• 1993

This paper presents function approximation based on nonparametric estimation. As an estimation model of function approximation, a three layered network composed of input, hidden and output layers is considered. The input and output layers have linear activation units while the hidden layer has nonlinear activation units or kernel functions which have the characteristics of bounds and locality. Using this type of network, a many-to-one function is synthesized over the domain of the input space by a number of kernel functions. In this network, we have to estimate the necessary number of kernel functions as well as the parameters associated with kernel functions. For this purpose, a new method of parameter estimation in which linear learning rule is applied between hidden and output layers while nonlinear (piecewise-linear) learning rule is applied between input and hidden layers, is considered. The linear learning rule updates the output weights between hidden and output layers based on the Linear Minimization of Mean Square Error (LMMSE) sense in the space of kernel functions while the nonlinear learning rule updates the parameters of kernel functions based on the gradient of the actual output of network with respect to the parameters (especially, the shape) of kernel functions. This approach of parameter adaptation provides near optimal values of the parameters associated with kernel functions in the sense of minimizing mean square error. As a result, the suggested nonparametric estimation provides an efficient way of function approximation from the view point of the number of kernel functions as well as learning speed.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.533-546
• /
• 2018

This study proposes a comprehensive mathematical model that includes coil-system circuit and loss models for power converters in wireless power transfer (WPT) systems. The proposed model helps in understanding the performance of WPT systems in terms of coil-to-coil efficiency, overall efficiency, and output power capacity and facilitates system performance optimization. Three methods to achieve constant output power for variable-load systems are presented based on system performance analysis. An optimal method can be selected for a specific WPT system by comparing the efficiencies of the three methods calculated with the proposed model. A two-coil 1 kW WPT system is built to verify the proposed mathematical model and constant output power control methods. Experimental results show that when the load resistance varies between 5 and $25{\Omega}$, the system output power can be maintained at 1 kW with a maximum error of 6.75% and an average error of 4%. Coil-to-coil and overall efficiencies can be maintained at above 90% and 85%, respectively, with the selected optimal control method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권10호
• /
• pp.1031-1036
• /
• 2015

Proportional-integral-derivative (PID) controllers are widely used in industrial sites. Most tuning methods for PID controllers use an empirical and experimental approach; thus, the experience and intuition of a designer greatly affect the tuning of the controller. The representative methods include the closed-loop tuning method of Ziegler-Nichols (Z-N), the C-C tuning method, and the Internal Model Control tuning method. There has been considerable research on the tuning of PID controllers for single-input single-output systems but very little for multi-input multi-output systems. It is more difficult to design PID controllers for multi-input multi-output systems than for single-input single-output systems because there are interactive control loops that affect each other. This paper presents a tuning method for the PID controller for a two-input two-output system. The proposed method uses a real-coded genetic algorithm (RCGA) as an optimization tool, which optimizes the PID controller parameters for minimizing the given objective function. Three types of objective functions are selected for the RCGA, and each PID controller parameter is determined accordingly. The performance of the proposed method is compared with that of the Z-N method, and the validity of the proposed method is examined.

• STI Policy Review
• /
• 제7권2호
• /
• pp.85-105
• /
• 2016

This study compares the economic impacts among ICT sectors and derives strategic considerations for development of the ICT industry in Korea. Prior to analysis, this study classified ICT industry into four sectors: ICT equipment, components, service, and SW/system. This study conducted Input-Output Analysis on the four ICT sectors. An Input-Output Analysis is a quantitative economic technique that represents the direct and indirect interdependencies between different industries of a national economy. Features of each ICT sector were observed in the results. Within the ICT equipment sector, production is decreasing, import dependence is increasing, and employment size is very low, relative to the overall ICT industry. The component sector accounts for the over half of the output and value added of the ICT industry, but domestic production has recently declined. The subsector experienced decreasing production and increasing imports relative to the other ICT subsectors. In the service sector, output is small but its production and employment impact is very high. The fourth sector, ICT SW/system, has very low impact on production but high impact on employment. These features suggest two strategies to develop the ICT industry in Korea. First, the ICT component and service sectors should be promoted to stimulate growth of the national economy. Second, to encourage employment growth, policies should promote the ICT SW/system and service sectors.

• 센서학회지
• /
• 제7권5호
• /
• pp.300-305
• /
• 1998

본 논문에서는 옵셋전압 및 full scale 출력전압, 옵셋전압 및 full scale 출력전압의 온도특성이 보상된 집적화 된 실리콘 압력센서를 설계하였다. 신호처리회로는 옵셋전압 및 full scale 출력전압을 원하는 값으로 조정할 수 있고 옵셋전압의 온도 드리프트를 최소화할 수 있으며 출력전압이 양의 온도계수를 갖도록 하여 압저항계수의 온도계수와 상쇄되도록 설계하였다. 설계한 신호처리회로는 바이폴라 공정 파라미터를 이용하여 SPICE로 시뮬레이션하였다. 옵셋전압 및 full scale 출력전압의 조정을 위하여 온도계수가 서로 다른 이온주입저항을 이용하였다. 시뮬레이션결과 옵셋전압 및 옵셋전압의 온도계수 조정저항을 이용하여 옵셋전압을 0.133V로 조정하였고 온도 드리프트는 $42\;ppm/^{\circ}C$로 감소시킬 수 있었다. full scale 출력전압 조정저항을 이용하여 full scale 출력전압값을 4.65V로 조정하였고 온도보상을 통해 출력전압의 온도계수를 $40\;ppm/^{\circ}C$로 감소시킬 수 있었다.

• Journal of KIEE
• /
• 제10권1호
• /
• pp.23-27
• /
• 2000

The relative degree one and weakly minimum-phase conditions have been major obstacles for passification of the given system. In this paper, a dynamic output feedback passifier which can remove the obstacles is presented. The proposed method does not require any modification of the given output except just adding a new term. Therefore, the scheme is more suitable for output feedback passification.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1099-1101
• /
• 2003

The diagnosis of power converter using auxiliary circuit connected to output terminal is proposed and verified by experimental results in this paper. On contrary to conventional diagnosis method, the proposed monitoring technique is possible to measure the state of power converter and unbalanced output caused by a misfiring of switch and unusual control signal. Conventional method gives a monitoring approaches for only a unusual operation of power converter. In this paper, three signals with auxiliary circuit are obtained and analyzed to see the state of electrolytic capacitor, power semiconductor switches and output voltage balance. 2kVA inverter is made and fisted to verify the proposed circuit.