• 공연문화연구
• /
• 제42호
• /
• pp.47-75
• /
• 2021

이 글은 1979년 MBC의 6·25 특집극 <최후의 증인>을 분석하여 1970년대에 추리와 전쟁이 어떤 상관관계를 맺고 있는지를 분석하려 한다. 전쟁의 기억을 전유하려는 국가의 기획과 이를 새로운 방식으로 전유하려는 제작주체의 의도, 그리고 시청자들이 브라운관을 통해 드라마를 수용하는 맥락에 대한 종합적인 이해를 통해 텔레비전의 시대로 전진하는 1970년대의 굴절을 특집극에서 찾으려 한다. 이를 위해 소설 『최후의 증인』과 1979년 방송된 6·25 특집극 <최후의 증인>을 주요 텍스트로 삼아 김성종의 추리가 텔레비전드라마로 각색되는 양상을 살펴보려 했다. 본고가 분석대상으로 삼은 6·25 특집극 <최후의 증인>은 예술성과 목적성을 동시에 갖춘 수준 높은 특집극을 제작하기 위한 기획의 산물이었다. 하지만 텔레비전 시청이 여가의 중요한 수단으로 자리 잡게 되면서 텔레비전드라마 시청의 핵심적인 이유가 되면서 시청자의 즐거움을 위해 고안된 자극적이고 선정적인 서사들이 정권의 입장에서는 장애물로 인식되었다. 주지하다시피 특집극은 일일극 위주의 텔레비전드라마 시장에 예술성과 목적성을 함께 충족시키기 위해 고안된 예술형식이다. 제작주체가 추진하던 예술적인 드라마와 시청자들이 요구하던 즐거운 드라마의 충돌은 역동적인 소통의 장을 형성한다. 이 과정에서 특집극은 본래 기획을 포괄하는 동시에 시청자들의 즐거움을 충족시키기 위해 구성된 새로움은 국민총화의 의도를 아득히 벗어나기도 했다. 추리과정을 시각적으로 형상화하는 방식으로 고안된 수사드라마는 시대적 리얼리티를 담보하는 새로운 가능성이 되기도 했지만 본래의 의도를 상실한 저속한 문화의 표본으로 지적되었다는 점에서 역설적인 존재와도 같았다. 그렇게 보자면 한국 대중예술에서 유독 힘을 쓰지 못했다고 여겨졌던 추리물은 1970년대에 이르러 한국 텔레비전드라마와 조우하며 수용자들에게 적지 않은 영향력을 발휘했다는 사실을 기억할 필요가 있다. 모든 장르물이 그러하겠지만 장르를 구성하는 다양한 요소들은 이식과 수용의 과정을 거친 형태로 수용자와 대면하게 된다. 주지하다시피 한국에서 추리는 반공, 수사와 결합을 거듭하면서 자신의 고유한 양식을 형성해냈다. 이러한 결합의 양상은 <최후의 증인>의 각색 과정에서 선택과 배제된 요소들을 통해 자연스럽게 장르적 정체성을 형성하는 방식에서 확인할 수 있다. 결론적으로 특집극 <최후의 증인>은 1970년대 내내 반공과 수사를 통해 형성된 텔레비전드라마의 추리가 범죄로 이동해가는 경향을 드러낸 중간적인 텍스트라고 볼 수 있다. 결국 이 글이 도달한 결론은 추리라는 특정한 장르가 텔레비전드라마와 조우할 때 공적 체제에 대한 신뢰감을 드러내는 한편 즐거움에 대한 정치적 해석을 우회할 수 있는 가능성을 끊임없이 탐색한다는 사실이다. 전쟁의 기억은 사회와 체제의 어두운 이면에 새겨진 불온한 상상을 중화시켜줄 알리바이에 가깝다. 결과적으로 유신정권의 말기에 방송된 <최후의 증인>은 특집극의 논리가 텔레비전의 매체적 특성과 조우한 기이한 결과물인 셈이다. 텍스트에 새겨진 흔적을 쫓아 사회적 담론에 대응하여 대결과 우회를 거듭하며 소통을 시도하던 시청자들의 장르적 욕망은 이제 다시 복원될 필요가 있다.

• 지능정보연구
• /
• 제28권1호
• /
• pp.175-196
• /
• 2022

우리나라의 주력 산업 중 하나였던 정보통신 및 가전 산업은 점차 수출 비중이 낮아지는 등 수출 경쟁력이 약화되고 있다. 본 연구는 이런 정보통신 및 가전 산업의 수출 제고를 돕기 위해서 객관적으로 수출경쟁력을 분석하고 수출 유망국가를 제시하고자 했다. 본 연구는 수출경쟁력 평가를 위해서 네트워크 분석 중 구조적 특징, 중심성 그리고 구조적 공백 분석을 수행했다. 유망 수출 국가를 선정하기 위해서는 기존에 경제적 요인 외에도 이미 형성된 글로벌 무역 네트워크(ITN) 즉 글로벌 밸류체인(GVC)의 특성을 고려할 수 있는 새로운 변수를 제안했다. 국가간 무역 네트워크 분석에서 Exponential Random Graph Model(ERGM)을 통해 도출된 개별적인 링크에 대한 조건부 로짓값(log-odds)을 수출가능성을 나타낼 수 있는 대리변수로 가정했다. 이런 ERGM의 링크 연결 가능성까지 고려해 수출 유망국가를 추천하는 데는 모수적 접근 방법과 비모수적 접근 방법을 각각 활용했다. 모수적 방법에서는 ERGM에서 도출된 네트워크의 링크별 특성값을 기존의 경제적 요인에 추가 고려하여 우리나라 정보통신 및 가전 산업 수출액을 예측하는 회귀분석 모형을 개발했다. 또한 비모수적 접근 방법에서는 클러스터링 방법을 바탕으로 한 Abnormality detection 알고리즘을 활용했는데, 2개 Peer(동배)에서 벗어난 이상값을 찾는 방법으로 수출 유망국가를 제안했다. 연구 결과에 따르면, 해당 산업 수출 네트워크의 구조적 특징은 이전성이 높은 연결망이었으며, 중심성 분석결과에 따르면 우리나라는 수출에 규모에 비해서 영향력이 약한 것으로 나타났고, 구조적 공백 분석결과에서 수출 효율성이 약한 것으로 나타났다. 본 연구가 제안한 추천모델에 따르면 모수 분석에서는 이란, 아일랜드, 북마케도니아, 앙골라, 파키스탄이 유망 수출 국가로 나타났으며, 비모수 분석에서는 카타르, 룩셈부르크, 아일랜드, 북마케도니아, 파키스탄이 유망 국가로 분석되었으며, 분석방법에 따라 추천된 국가에서는 일부 차이가 나타났다. 본 연구결과는 GVC에서 우리나라 정보통신과 가전 산업의 수출경쟁력이 수출 규모에 비해서 높지 않음을 밝혔고, 따라서 수출이 더욱 감소될 수 있음을 보였다. 또한 본 연구는 이렇게 약화된 수출경쟁력을 높일 수 있는 방안으로 다른 국가들과의 GVC 네트워크까지 고려해 수출유망 국가를 찾는 방법을 제안했다는데 의의가 있다.

• Asia Marketing Journal
• /
• 제12권4호
• /
• pp.55-78
• /
• 2011

외식업계에서는 충성도제고를 위한 장기적 고객 관리 프로그램으로서 사용금액 대비 일정률의 포인트를 적립해주는 고객보상(로열티)프로그램을 시행해왔으며, 단기적인 매출 증대를 목적으로 신용카드사나 이동통신사와의 전략적 제휴를 통해 소비자에게 할인혜택을 제공하는 제휴할인카드를 경쟁적으로 도입하고 있다. 포인트 적립과 제휴카드할인 프로그램은 추구하는 목적은 서로 다르나 소비자에게는 동일한 구매시점에 둘 중에서 하나를 선택해야하는 경합적인 대안이 된다. 일반적으로 소비자는 손실에 대해 더 민감하게 반응하는 위험회피 성향을 보이며, 실용적 동기에 의한 취득 및 거래효용의 관점에서 할인이 강력한 구매 동기가 되므로, 분리된 이익으로서의 포인트 적립 보다 할인 혜택을 제공함으로써 손실의 감소로 인식되는 제휴카드할인이 더 선호될 것으로 예상할 수 있다. 기업의 입장에서도 제휴기업간의 비용분담을 통해 보다 적은 비용으로 큰 소비자 할인혜택을 제공할 수 있다는 비용효율의 장점 및 경쟁 대응 필요성 때문에 제휴카드할인을 도입하게 된다. 그러나 할인판촉은 실제적인 비용이 투입되므로 매출의 증가를 통해 비용 보다 큰 수익이 보장될 때만 의미를 가지는 촉진 수단이다. 외식업의 경우 방문객수가 증가해야 매출의 증대를 이룰 수 있으며 운영효율이 향상된다. 테이블당 고객수 증가는 공간효율을 높여주어 이익개선에 기여가 크다. 따라서 제휴카드할인이 실제적인 기업성과향상을 가져오려면 할인이 객수의 증가 특히 테이블당 객수의 증가에 기여를 해야 한다. 제휴카드할인이 객수증가 및 이익률의 향상에 도움이 되는지의 여부를 알아보기 위하여 패밀리 레스토랑업체의 실제 매출 데이터를 사용하여 검증해 본 결과 포인트 적립제도는 객수 증가와 유의적 관계를 보이지 않은 반면 제휴할인은 객수 증가에 실제적인 영향이 있음이 밝혀졌으며, 할인율이 증가하면 테이블당 고객수도 증가하며 약 25%의 할인이 제공되면 추가로 한 명의 고객이 유인되는 효과가 있었다. 또한 수익성의 측면에서는 1인당 지불금액 즉 객단가는 할인율의 증가에 따라 하락하는 경향을 보였지만 객수의 증가로 인한 추가이익이 추가비용을 상쇄하고 있어서 제휴할인카드의 도입이 비용 대비 효과의 측면에서 적극적으로 고려할 수 있는 촉진 수단임이 입증되었다. 본 연구는 기업의 실측 데이터를 활용하고 있다는 점에서 소비자 태도나 의도의 변화를 기준으로 기업의 의사 결정 정보를 제공하고자한 기존연구보다 현실적인 접근을 하고 있다. 즉, 기업의 실제 데이터로 제휴카드할인 프로그램의 효과를 측정하였고, 포인트 적립 및 차감제도를 직접 비교함으로써 기업에게 향후 마케팅 전략 수립에 관한 현실적인 시사점을 제공하였다는 점에서 연구의 의의를 찾을 수 있을 것이다.

• 대한간호
• /
• 제36권1호
• /
• pp.77-96
• /
• 1997

The duty shifts of hospital nurses not only affect nurses' physical and mental health but also present various personnel management problems which often result in high turnover rates. In this context a study was carried out from October to November 1995 for a period of two months to find out the status of hospital nurses' duty shift patterns, and preferred duty hours and fixed duty shifts. The study population was 867 RNs working in five general hospitals located in Seoul and its vicinity. The questionnaire developed by the writer was used for data collection. The response rate was 85.9 percent or 745 returns. The SAS program was used for data analysis with the computation of frequencies, percentages and Chi square test. The findings of the study are as follows: 1. General characteristics of the study population: 56 percent of respondents was (25 years group and 76.5 percent were "single": the predominant proportion of respondents was junior nursing college graduates(92.2%) and have less than 5 years nursing experience in hospitals(65.5%). For their future working plan in nursing profession, nearly 50% responded as uncertain The reasons given for their career plan was predominantly 'personal growth and development' rather than financial reasons. 2. The interval for rotations of duty stations was found to be mostly irregular(56.4%) while others reported as weekly(16.1%), monthly(12.9%), and fixed terms(4.6%). 3. The main problems related to duty shifts particularly the evening and night duty nurses reported were "not enough time for the family, " "afraid of security problems after the work when returning home late at night." and "lack of leisure time". "problems in physical and physiological adjustment." "problems in family life." "lack of time for interactions with fellow nurses" etc. 4. The forty percent of respondents reported to have '1-2 times' of duty shift rotations while all others reported that '0 time'. '2-3 times'. 'more than 3 times' etc. which suggest the irregularity in duty shift rotations. 5. The majority(62.8%) of study population found to favor the rotating system of duty stations. The reasons for favoring the rotation system were: the opportunity for "learning new things and personal development." "better human relations are possible. "better understanding in various duty stations." "changes in monotonous routine job" etc. The proportion of those disfavor the rotating 'system was 34.7 percent. giving the reasons of"it impedes development of specialization." "poor job performances." "stress factors" etc. Furthermore. respondents made the following comments in relation to the rotation of duty stations: the nurses should be given the opportunity to participate in the. decision making process: personal interest and aptitudes should be considered: regular intervals for the rotations or it should be planned in advance. etc. 6. For the future career plan. the older. married group with longer nursing experiences appeared to think the nursing as their lifetime career more likely than the younger. single group with shorter nursing experiences ($x^2=61.19.{\;}p=.000;{\;}x^2=41.55.{\;}p=.000$). The reason given for their future career plan regardless of length of future service, was predominantly "personal growth and development" rather than financial reasons. For further analysis, the group those with the shorter career plan appeared to claim "financial reasons" for their future career more readily than the group who consider the nursing job as their lifetime career$(x^2$= 11.73, p=.003) did. This finding suggests the need for careful .considerations in personnel management of nursing administration particularly when dealing with the nurses' career development. The majority of respondents preferred the fixed day shift. However, further analysis of those preferred evening shift by age and civil status, "< 25 years group"(15.1%) and "single group"(13.2) were more likely to favor the fixed evening shift than > 25 years(6.4%) and married(4.8%)groups. This differences were statistically significant ($x^2=14.54, {\;}p=.000;{\;}x^2=8.75, {\;}p=.003$). 7. A great majority of respondents(86.9% or n=647) found to prefer the day shifts. When the four different types of duty shifts(Types A. B. C, D) were presented, 55.0 percent of total respondents preferred the A type or the existing one followed by D type(22.7%). B type(12.4%) and C type(8.2%). 8. When the condition of monetary incentives for the evening(20% of salary) and night shifts(40% of. salary) of the existing duty type was presented. again the day shift appeared to be the most preferred one although the rate was slightly lower(66.4% against 86.9%). In the case of evening shift, with the same incentive, the preference rates for evening and night shifts increased from 11.0 to 22.4 percent and from 0.5 to 3.0 percent respectively. When the age variable was controlled. < 25 yrs group showed higher rates(31.6%. 4.8%) than those of > 25 yrs group(15.5%. 1.3%) respectively preferring the evening and night shifts(p=.000). The civil status also seemed to operate on the preferences of the duty shifts as the single group showed lower rate(69.0%) for day duty against 83. 6% of the married group. and higher rates for evening and night duties(27.2%. 15.1%) respectively against those of the married group(3.8%. 1.8%) while a higher proportion of the married group(83. 6%) preferred the day duties than the single group(69.0%). These differences were found to be statistically all significant(p=.001). 9. The findings on preferences of three different types of fixed duty hours namely, B, C. and D(with additional monetary incentives) are as follows in order of preference: B type(12hrs a day, 3days a wk): day shift(64.1%), evening shift(26.1%). night shift(6.5%) C type(12hrs a day. 4days a wk) : evening shift(49.2%). day shift(32.8%), night shift(11.5%) D type(10hrs a day. 4days a wk): showed the similar trend as B type. The findings of higher preferences on the evening and night duties when the incentives are given. as shown above, suggest the need for the introductions of different patterns of duty hours and incentive measures in order to overcome the difficulties in rostering the nursing duties. However, the interpretation of the above data, particularly the C type, needs cautions as the total number of respondents is very small(n=61). It requires further in-depth study. In conclusion. it seemed to suggest that the patterns of nurses duty hours and shifts in the most hospitals in the country have neither been tried for different duty types nor been flexible. The stereotype rostering system of three shifts and insensitiveness for personal life aspect of nurses seemed to be prevailing. This study seems to support that irregular and frequent rotations of duty shifts may be contributing factors for most nurses' maladjustment problems in physical and mental health. personal and family life which eventually may result in high turnover rates. In order to overcome the increasing problems in personnel management of hospital nurses particularly in rostering of evening and night duty shifts, which may related to eventual high turnover rates, the findings of this study strongly suggest the need for an introduction of new rostering systems including fixed duties and appropriate incentive measures for evenings and nights which the most nurses want to avoid, In considering the nursing care of inpatients is the round-the clock business. the practice of the nursing duty shift system is inevitable. In this context, based on the findings of this study. the following are recommended: 1. The further in-depth studies on duty shifts and hours need to be undertaken for the development of appropriate and effective rostering systems for hospital nurses. 2. An introduction of appropriate incentive measures for evening and night duty shifts along with organizational considerations such as the trials for preferred duty time bands, duty hours, and fixed duty shifts should be considered if good quality of care for the patients be maintained for the round the clock. This may require an initiation of systematic research and development activities in the field of hospital nursing administration as a part of permanent system in the hospital. 3. Planned and regular intervals, orientation and training, and professional and personal growth should be considered for the rotation of different duty stations or units. 4. In considering the higher degree of preferences in the duty type of "10hours a day, 4days a week" shown in this study, it would be worthwhile to undertake the R&D type studies in large hospital settings.

• 헤리티지:역사와 과학
• /
• 제46권2호
• /
• pp.186-205
• /
• 2013

간송미술관 소장 ${\ll}$삼청첩${\gg}$은 조선 중기 문인 화가인 탄은(灘隱) 이정(李霆)이 매화, 난초, 대나무를 그리고, 시를 지어 함께 장첩한 시화첩(詩畵帖)이다. 조선 묵죽화의 전범(典範)을 세운 화가로 평가받는 이정의 시화(詩畵)를 한 곳에서 감상할 수 있다는 점만으로도 ${\ll}$삼청첩${\gg}$의 미술사적 가치는 매우 높다. 그러나 ${\ll}$삼청첩${\gg}$의 가치는 여기에 국한되지 않는다. ${\ll}$삼청첩${\gg}$의 이력(履歷)이라 할 수 있는 제작배경, 성첩(成帖)과정, 전래시말 등에는 제작 당시의 시대상은 물론, 통시대적인 다양한 역사상들이 투영되어 있다. ${\ll}$삼청첩${\gg}$은 이정이 임진왜란시 왜적에게 칼을 맞는 수난을 겪은 후, 필생의 역작을 남기려는 의도 하에 만들어졌다. 이후 최립(崔?), 차천로(車天輅), 한호(韓濩) 등 시서(詩書) 각 분야에서 당대 최고의 성가를 구가하던 문인들이 동참하여 성첩되었다. 그리고 유근(柳根), 이안눌(李安訥), 유몽인(柳夢寅) 등이 찬문과 제시를 지어 상찬하였다. 그야말로 '일대교유지사(一代交遊之士)'가 동참하여 만들어낸 '일세지보(一世之寶)'였던 것이다. 이런 점들을 고려할 때, ${\ll}$삼청첩${\gg}$은 이정 개인의 작품을 넘어 조선 중기 문예의 지향과 역량이 한 자리에 모인 종합예술품이며, 조선 중기 문화의 표상이라 할 수 있다. ${\ll}$삼청첩${\gg}$은 이정이 세상을 뜬 후, 선조의 부마인 홍주원(洪柱元)에게 넘어갔고, 병자호란 시 소실(燒失)될 위기를 겪는다. 현재까지도 그때의 화흔(火痕)이 역력하게 남아 있어, 당시의 급박한 상황을 생생하게 전해주고 있다. 호란이 끝나고 홍주원은 동서(同壻)인 윤신지(尹新之)의 도움으로 훼손된 일부 제발문(題跋文)들을 복원하였고, 이후 풍산 홍씨(豊山洪氏) 집안에서 7대를 이어가며 가보(家寶)로 전해진다. 홍중기(洪重?)의 요청에 의해 쓰여진 송시열(宋時烈)의 발문과 홍상한(洪象漢)의 요청에 의해 쓰여진 어유봉(魚有鳳)의 발문 등을 통해 이를 확인할 수 있다. 그런데 이정 생존시 문인들이 이정과 ${\ll}$삼청첩${\gg}$의 지닌 작품성에 대해 상찬한 것과는 달리 후대 문인들의 글은 ${\ll}$삼청첩${\gg}$의 전래과정과 그와 관련된 인물들에 초점을 두고 있어 대조적이다. 후대의 문인들은 ${\ll}$삼청첩${\gg}$ 자체의 작품성보다는 그에 얽힌 일화와 그 속에 등장하는 인물들에 흥미를 느끼고 의미를 부여하고 있는 것이다. 특히 ${\ll}$삼청첩${\gg}$을 다시 복원한 홍주원에 대해 높이 평가하고 있다. 이는 ${\ll}$삼청첩${\gg}$의 소장자로 글을 부탁한 홍주원의 후손들인 홍중기, 홍상한 등의 정치적, 사회적 입지를 강화시켜 주고자 하는 의도가 없지 않을 것이다. 홍주원의 후손들에게는 ${\ll}$삼청첩${\gg}$이 가문의 조상을 추숭(追崇)하는 기재인 동시에, 정치적 정통성과 가격(家格)을 담보하는 역할을 했던 것으로 보이기 때문이다. 미술품의 미적 가치 못지않게 그 안에 내재된 역사성을 중시했던 동아시아 특유의 예술 인식의 근인(根因)을 엿볼 수 있는 대목이다. 그러나 ${\ll}$삼청첩${\gg}$은 조선 말기 외세 침탈의 와중에서 일본인 츠보이 코우소(坪井航三)에게 넘어가는 비운을 맞게 된다. 다행히도 일제시기 심혈을 기울여 우리 문화재를 수호했던 전형필(全鎣弼)이 이를 되찾아왔고, 현재 간송미술관에 수장되어 전해오고 있다. ${\ll}$삼청첩${\gg}$은 임진왜란과 병자호란, 일제 침탈로 이어지는 조선시대 국난과 이를 극복하는 과정이 그 안에 고스란히 담겨 있으며, 우리 문화재의 수난과 보존의 역사를 여실히 보여주고 있다. 또한 그를 통해 하나의 미술품이 유전과정에서 또 다른 역사성을 지속적으로 축적하며 그 의미와 가치를 강화시켜가는 것을 확인할 수 있다. 이렇듯 중층적인 시의성(時宜性)과 지속적인 역사성(歷史性)을 지닌 ${\ll}$삼청첩${\gg}$은 미술품이 미적 가치와 더불어 사료적 가치를 얼마나 풍부하게 지니고 있는지를 보여주는 전형적인 사례라 생각된다. 이를 계기로 향후 미술품의 이력과 그 역사적 의미를 찾는 고찰들이 활성화되기를 기대해 본다.

• Asia Marketing Journal
• /
• 제14권2호
• /
• pp.39-63
• /
• 2012

보상프로그램에 관한 기존 연구들은 프로그램에 대한 소비자의 지각된 가치가 높을수록 브랜드충성도가 증가할 것이라는 가정 하에, 소비자가 가장 선호하는 보상프로그램을 설계하는 데 초점을 맞추어왔다. 또한 이들은 연구대상으로 인터넷쇼핑몰보다는 주로 오프라인 매장을 사용하였다. 이는 인터넷쇼핑 상황에서 보상프로그램에 대한 소비자의 가치인식이 브랜드충성도에 미치는 효과가 실제로 유의한지 그렇다면 어떠한 경로를 통해 영향을 미치는 지에 대한 연구가 미흡함을 의미한다. 한편, 소비자는 인터넷쇼핑몰을 이용할 때 필요한 물건을 구매하고자 하는 실용적 동기와 쇼핑 그 자체를 즐기고자 하는 쾌락적 동기를 가지게 되며, 인터넷쇼핑몰은 소비자들의 이러한 양면적 동기를 충족시킬 수 있는 가치(실용적 또는 쾌락적 가치)있는 경험들을 제공함으로써 브랜드충성도를 증가시킬 수 있다. 이는 인터넷쇼핑몰이 제공하는 보상의 유형이 실용적인지, 쾌락적 인지에 따라 다른 유형의 쇼핑 가치를 강화함으로써 브랜드충성도에 영향을 미치는 경로가 달라질 수 있음을 의미한다. 따라서 본 연구는 다음과 같은 세 가지 목적을 가지고 수행되었다. 첫째, 인터넷쇼핑 상황에서의 보상프로그램이 오프라인 쇼핑상황에서와 동일하게 브랜드충성도를 제고하는데 효과적인지 알아보고자 하였다. 둘째, 기존 연구에서 고려하지 않은 "보상프로그램 가치인식 → 브랜드신뢰, 브랜드감정 → 브랜드충성도" 경로를 추가한 연구모형을 제안하고 분석함으로써, 보상프로그램 가치인식이 브랜드충성도에 미치는 또 다른 경로가 있음을 보이고자 하였다. 마지막으로, 보상의 유형(실용적 vs. 쾌락적)에 따라 "보상프로그램 가치인식 → 브랜드신뢰, 브랜드감정 → 브랜드충성도" 관계가 조절될 수 있는지 확인하고자 하였다. 이를 위해 문헌연구를 통해 10개의 가설 및 연구모형을 도출하였으며, 20대 남녀220명을 대상으로 설문조사를 실시하여 데이터를 수집한 후, 구조방정식모델을 이용해 가설들을 검정함으로써 다음과 같은 시사점들을 제공하였다. 먼저, 본 연구는 오프라인 매장을 중심으로 연구되어온 브랜드충성도에 대한 보상프로그램의 효과가 인터넷쇼핑 상황에서도 유의함을 보여줌으로써 인터넷쇼핑몰이 보상프로그램을 운영해야 할 논리적 근거를 마련해주고 있다. 하지만 기존 연구를 통해 확인된 "보상프로그램 가치인식 → 프로그램 충성도 → 브랜드충성도"의 경로가 인터넷쇼핑 상황에서는 유의하지 않은 것으로 나타났다. 반면 "보상프로그램 가치인식 → 브랜드신뢰, 브랜드감정 → 브랜드충성도"의 경로가 유의하게 나타나 인터넷쇼핑몰이 제공하는 보상프로그램에 대한 가치인식은 오프라인 매장과는 다른 경로를 통해 브랜드충성도에 영향을 미치고 있음을 알 수 있다. 한편, 인터넷쇼핑몰이 제공하는 보상프로그램에 대한 가치인식이 브랜드 신뢰에 미치는 영향은 쾌락적 보상보다는 실용적 보상이 더 크게 나타난 반면, (통계적으로 유의하지는 않았지만) 보상프로그램에 대한 가치인식이 브랜드감정에 미치는 영향은 실용적 보상 보다는 쾌락적 보상이 더 큰 것으로 나타났다. 이는 해당 인터넷쇼핑몰을 이용할 때 소비자가 상대적으로 더 추구하는 가치의 유형(실용적 vs. 쾌락적)을 파악하여 이를 강화할 수 있는 유형의 보상을 제공하거나 소비자가 스스로 보상의 유형을 선택할 수 있는 권한을 부여할 경우, 브랜드신뢰와 브랜드감정을 효과적으로 증가시켜 브랜드충성도를 제고할 수 있음을 말해준다.

• 한국심리학회지 : 문화 및 사회문제
• /
• 제12권5호_spc
• /
• pp.45-79
• /
• 2006

필자와 공동연구자들(2002)이 선행연구에서 개발한 주관안녕척도를 사용하여 한국문화에서 주관안녕에 영향을 미치는 변인들을 알아낸 연구 결과들을 개관하고, 국내외 연구들과 비교하여 시사점을 논의하고, 장래 연구할 과제들도 제안하였다. 먼저 주관안녕에 영향을 미치는 선행요인들로 ① 개인차와 인구통계 변인들, ② 개인과정 요인들, ③ 대인과정 요인들 및 ④ 한국문화의 요인으로 사회규범에 따른 행동을 다룬 연구 결과들을 개관했다. 또한 노인을 대상으로 주관안녕이 동시점에서 신체건강의 예측에 기여하는 수준과 아울러 1년 이상이 경과한 시점에서 종단적으로 신체건강이나 생사에 어떤 영향을 미치는지도 알아냈다. 본 논문은 한국문화에서 필자와 공동연구자들이 수행한 실증연구의 결과들과 연결시켜서 주관안녕을 연구하는데 따르는 이론, 방법 및 과제들을 구체적으로 논의함으로써 장차 문화비교 연구와 아울러 국내 연구에 시사점들을 제시한데 의의가 있다.

• 마케팅과학연구
• /
• 제17권4호
• /
• pp.141-173
• /
• 2007

본 연구는 점포를 방문하는 동안 노출되는 매장의 물리적 환경 특성이 서비스 브랜드 개성과 재구매의도에 미치는 영향력을 규명하기 위해 시도되었다. 이를 위해 연구모형을 개발하여, 특정 서비스 브랜드의 이용객을 대상으로 설문조사를 실시하고 구조방정식을 이용하여 분석하였다. 연구 결과는 우선, 서비스의 물리적 환경은 주변요인, 디자인요인, 사회요인으로, 그리고 서비스브랜드 개성은 유능함, 성실함, 흥분됨, 세련됨, 강인함 차원으로 분류되었다. 둘째, 물리적 환경의 모든 차원들이 모든 서비스 브랜드 개성차원에 정(+)의 영향을 주었으며, 물리적 환경의 서비스 브랜드 개성에 대한 영향력은 각 차원별로 상이하였다. 셋째, 서비스 브랜드 개성은 모두 재구매의도에 정(+)의 영향을 주었으며, 특히 세련됨 차원에 미치는 영향이 가장 켰다. 넷째, 서비스의 물리적 환경은 재구매의도에 정(+)의 영향을 주었으며, 특히 물리적 환경 중 사회요인이 재구매의도에 가장 큰 영향을 주는 것으로 나타났다. 이와 같은 결과들은 물리적 환경 연출은 브랜드 개성 형성의 결정요인으로 서비스 브랜드 차별화의 핵심요인으로 작용하므로, 호의적인 브랜드 개성 창출을 위해서는 우선적으로 물리적 환경에 대한 효율적 관리 방안이 강구되어야 함을 보여준다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.