• Journal of the Korean Data and Information Science Society
• /
• v.20 no.5
• /
• pp.933-939
• /
• 2009

The bivariate data in clinical research fields often has two types of failure times, which are mark variable for the first failure time and the final failure time. This paper showed how to generate bootstrap data to get Bayesian estimation for the joint distribution of bivariate survival times. The observed data was generated by Frank's family and the fake date is simulated with the Gamma prior of survival time. The bootstrap data was obtained by combining the mimic data with the observed data and the simulated fake data from the observed data.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.E2
• /
• pp.57-65
• /
• 2007

In Korea, there is a general lack of information available on air emissions from industry. The reasons for this include the lack of regulatory requirements for emission monitoring, limited information on specific industries, and difficulties in monitoring certain sources. This paper presents the first detailed air pollutant emission factors from composite wood product manufacturing in Korea. This study introduced emission factors for wood-based panels such as plywood, particle board (PB), and medium density fiberboard (MDF). The emission factors of particulate matters (PM) and hazardous air pollutants (HAPs) from MDF were higher than that from other wood products. The concentration of total volatile organic compounds (TVOCs) for hot press from wood-based panels was higher than drying or gluing processes. Emissions data from NPIP were compared to the data from the suggested emission factors in this study and the US EPA's. The data from our emission factors were closer to the observed results than the data using the US EPA's emission factor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.535-538
• /
• 2012

Recently active research for ITS(Intelligent Transportation System) helps to build for next generation traffic information system at information society. Build the system for sensing a vehicle speed and traffic information on the road. Provide collected data to driver, flow of overall traffic impacts have a good influence. In this study, research for building the platform and development algorithm that provided from other source processing real-time traffic data provides a more reliable real-time traffic data.

• ETRI Journal
• /
• v.30 no.2
• /
• pp.268-274
• /
• 2008

This paper proposes an open-loop clock recovery circuit (CRC) using two high-Q dielectric resonator (DR) filters for 39.8 Gb/s and 42.8 Gb/s dual-mode operation. The DR filters are fabricated to obtain high Q-values of approximately 950 at the 40 GHz band and to suppress spurious resonant modes up to 45 GHz. The CRC is implemented in a compact module by integrating the DR filters with other circuits in the CRC. The peak-to-peak and RMS jitter values of the clock signals recovered from 39.8 Gb/s and 42.8 Gb/s pseudo-random binary sequence (PRBS) data with a word length of $2^{31}-1$ are less than 2.0 ps and 0.3 ps, respectively. The peak-to-peak amplitudes of the recovered clocks are quite stable and within the range of 2.5 V to 2.7 V, even when the input data signals vary from 150 mV to 500 mV. Error-free operation of the 40 Gb/s-class optical receiver with the dual-mode CRC is confirmed at both 39.8 Gb/s and 42.8 Gb/s data rates.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.561-563
• /
• 2005

From the IF (Intermediated Frequency) loop-back test, BER (Bit Error Rate) degradation of processed data, HRIT (High Rate Information Transmission), is estimated by proposed measurement configuration. The specific parameters, likely data rate, FEC (Forward Error Correction), and modulation method, are based on the outcomes of SRR (System Requirements Review) which was held on 13-14 June 2005, in Toulouse. The proposed measurement procedure is that combined 70MHz modulated signal and noise is connected to the spectrum analyzer and receiver. The former measures the C/No (Carrier to Noise density ratio) and the latter estimates BER of FEC decoded data. Implementation loss can be obtained by subtracting measured BER from calculated BER which is also subtracted data rate from measured C/No. This test procedure is very simple and can be applied to assess the implementation loss of dedicated receiver for HRIT in the future.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.98-100
• /
• 2005

This paper describes link analysis on the processed data, HRIT (High Rate Information Transmission) and LRIT (Low Rate Information Transmission), for the preliminary design of interface between COMS (Communication, Ocean and Meteorological Satellite) and ground station. At the MODAC (MeteorologicaVOcean Data Application Center), the processed data are transmitted to user station via COMS with normalization and calibration by pre-processing of MI (Meteorological Imager) data. Due to consider satellite as radio relay, overall analysis containing uplink and downlink is needed. Specific link parameters can be obtained with using the outcomes of SRR (System Requirement Review) which was held on 13-14 June 2005, in Toulouse. From the relation between overall link margin and output power of HPA (High Power Amplifier) of MODAC, it is shown that even though the minimum power related with COMS receiving power range is transmitted at MODAC, the obtained link margin of HRIT could be above 3 dB at user station which antenna elevation angle is 10 degree.

• Journal of the Korean Solar Energy Society
• /
• v.21 no.4
• /
• pp.73-83
• /
• 2001

Since the solar radiation is the main input for sizing any solar system, it will be necessary to understand and evaluate the insolation data. The horizontal global insolation data have been measured since May, 1982 and direct normal solar insolation data since December 1990 at 16 different sites all over the country and considerable effort has been made for constructing a standard value from measured data at each station. In the results, the average global total solar radiation of the nation is $3,055kcal/m^2.day(12.79MJ/m^2.day)$ and the average clear day direct normal solar beam radiation was $4,600kcal/m^2.day(19.26MJ/m^2.day)$, which indicates possible solar energy application of medium and high temperature technologies with high concentration.

• IE interfaces
• /
• v.17 no.4
• /
• pp.426-439
• /
• 2004

This research discusses knowledge contents needed to build an OLAP system for medical sector, OLAP functionalities from past studies, and a medical intelligence system which is a kind of OLAP. The knowledge requirements which consist of nine contents and OLAP fundamental functionalities are applied to the system. Most past studies have focused on developing a medical data warehouse rather than OLAP. The medical intelligence system supplies health care providers (i.e., doctors, clinicians, researchers and nurses) and non-providers (i.e., managers and business analysts) with multidimensional OLAP functionalities. The system can be used to gain a deeper understanding of specific medical issues. In this research, we focus not on medical data warehouse, but on the technical challenges of designing and implementing an effective medical intelligence system for health care information. An architecture is applied to developing the medical intelligence system for a medical center in order to illustrate its practical usage. Six packages in the developed system are discussed in this research: Explorer, Analyzer, Reporter, Statistician, Visualizer, and Meta Administrator packages. Evaluation of the system and ongoing research directions conclude the research.

• Asian Journal of Business Environment
• /
• v.6 no.3
• /
• pp.21-31
• /
• 2016

Purpose - The purpose of this research is to determine the impact of word of mouth on customer perceived value for restaurants in Malaysia. The objectives of this research include determining how word of mouth (WoM) factors - frequency of word of mouth messages, reputation of word of mouth messenger, richness of word of mouth message, dispersion of word of mouth conversations and manner of word of mouth delivery impact customer perceived value in Malaysian restaurant industry. Research Design, Data, and Methodology - The research follows causal / explanatory research method based on quantitative data. A sample of 150 restaurant customers in Kuala Lumpur, Malaysia was selected using convenience sampling technique. Likert scale questionnaire is used to collect data and data is analysed using regression analysis through SPSS 22. Results - The statistical analysis revealed that independent variable 'manner of delivery' significantly and positively impacts customer perceived value for restaurants in Malaysia. Conclusions - To build strong positive customer perception, Malaysian restaurants can enhance word of mouth campaigns' 'manner of delivery' by making them passionate, exciting and with high emotional appeal.

• Spatial Information Research
• /
• v.20 no.6
• /
• pp.99-107
• /
• 2012

Recently, various researches have been attempted to connect or integrate BIM handling construction data and GIS handling spatial data. However, it is hard to interoperate by integration between two data models because characteristics and domains of data models between BIM and GIS are very different. In this research, we propose the platform to secure efficient interoperability between BIM and GIS and define the component technologies and functions of the platform proposed in this research by analyzing the existing commercial softwares.