• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.5
• /
• pp.39-44
• /
• 2007

In order to utilize unsorted ONP, which contains leaflets (printed coated papers), as a raw material to produce pulp mold, optimum conditions for repulping were investigated with the pilot Helico pulper at Centre Technique du Paper (CTP), France. Two major process factors were focused: repulping concentration and rotor speed. Repulping at a higher concentration showed more rapid defibering kinetics. Increasing the rotational speed of rotor at the optimum repulping concentration accelerated the defibering kinetics while it also led to higher fines generation and faster decrease in drainage property of the produced pulp. Hence, an alternative way was suggested: starting repulping at a conventional rotor speed and then accelerating the rotor speed for the last minute(s) of repulping.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.4
• /
• pp.38-44
• /
• 2007

In order to utilize unsorted ONP, which contains leaflets (printed coated papers), to produce pulp mold, optimum conditions for a repulping process were investigated with a laboratory high consistency pulper. It was concluded that medium or high consistency pulping is necessary to accelerate the rate of deflaking of unsorted ONP. Considering flake content, fines content and pulping energy, the optimum conditions for the laboratory Helico pulper were 11% of repulping concentration and 3 min of repulping time. The repulping temperature shall be at least $30^{\circ}C$. Aging of paper slows down the rate of de flaking but in an actual pulp molding process its effect could be negligible.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.3
• /
• pp.36-40
• /
• 2007

It has been problematic to repulp the dry broke treated with permanent wet strength agents like PAE, UF and MF. Solution type GPAM has the benefit of easy repulping but it has problems of cocross-linking and tends to gel. Therefore, the product concentration must be lower than 10% to reduce the gel generation problem. We developed emulsion type GPAM by an inverse emulsion technology to resolve both the repulping problem with permanent wet strength agents and the stability problem of GPAM solution products.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.2
• /
• pp.1-12
• /
• 2002

Starch dissolved in paper-mill wastes, either as a result of poor retention on the paper web or recycling of surface-treated broke, was a major pollutant Laboratory tests were performed by using different kinds of starch as a surface treatment. It was concluded that the use of cationic starch can positively affect the level of starch dissolved in liquid effluents. When cationically modified starches were used for surface sizing, the starch was tightly bound to the paper fibers, it was not removed during the repulping of broke. The result of mill trial in fine paper manufacture for the application of low-viscosity cationic starches used in size press reduced COD load in the effluents and increased One Pass Retention. It had been found that when cationic starch used as a surface sizing agent, more starch was retained on or near the surface of the sheet than with conventional oxidized starches. Thus surface strengths and quality were improved. In addition it is possible to maintain the desired level of starch penetration into the fiber net and improve porosity, opacity and brightness. In contrast, in most cases, dusting problems are notably eliminated. Cationic surface sized starch improved black and color ink-jet print quality in terms of feathering and optical density of the print image. These improved properties were believed to be due to a combination of fiber bonding and surface orientation more uniform starch concentration on the paper surface was resulted. Moreover cationic charges in the paper surface lend themselves excellently to fix ink jet ink anionic in nature.