펄프종이기술 (Journal of Korea Technical Association of The Pulp and Paper Industry)

한국펄프종이공학회 (Korea Technical Association of the Pulp and Paper Industry)
권호 표지

펄프몰드 제조를 위한 미분류 신문폐지의 펄핑 공정 최적화 (제1보) - 실험용 고농도 펄퍼 이용 -

Optimization of Repulping Process of Unsorted ONP for Pulp Mold (I) - Laboratory high consistency pulper -

  • 류정용 (한국화학연구원, 바이오정밀화학연구센터) ;
  • 조병욱 (한국화학연구원, 바이오정밀화학연구센터) ;
  • 김태근 (풍년기업사) ;
  • 박대식 (한국화학연구원, 바이오정밀화학연구센터) ;
  • 신은주 (한국화학연구원, 바이오정밀화학연구센터) ;
  • 송봉근 (한국화학연구원, 바이오정밀화학연구센터)
  • Ryu, Jeong-Yong (Chemical Biotechnology Research Center, Korea Research Institute of Chemical Technology(KRICT)) ;
  • Cho, Byoung-Uk (Chemical Biotechnology Research Center, Korea Research Institute of Chemical Technology(KRICT)) ;
  • Kim, Tae-Keun (Pung Nyun Ind. Co.) ;
  • Park, Dae-Sik (Chemical Biotechnology Research Center, Korea Research Institute of Chemical Technology(KRICT)) ;
  • Shin, Eun-Ju (Chemical Biotechnology Research Center, Korea Research Institute of Chemical Technology(KRICT)) ;
  • Song, Bong-Keun (Chemical Biotechnology Research Center, Korea Research Institute of Chemical Technology(KRICT))
  • 발행 : 2007.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In order to utilize unsorted ONP, which contains leaflets (printed coated papers), to produce pulp mold, optimum conditions for a repulping process were investigated with a laboratory high consistency pulper. It was concluded that medium or high consistency pulping is necessary to accelerate the rate of deflaking of unsorted ONP. Considering flake content, fines content and pulping energy, the optimum conditions for the laboratory Helico pulper were 11% of repulping concentration and 3 min of repulping time. The repulping temperature shall be at least $30^{\circ}C$. Aging of paper slows down the rate of de flaking but in an actual pulp molding process its effect could be negligible.

키워드

참고문헌

  1. Ahn, B.-K., Studies on the characteristics of molded pulp trays as a packaging material, J. Korea TAPPI 26(4):33-40 (1994)
  2. Sung, Y .J., Ryu, J.-Y., Kim, H. J., Kim, T. K. and Song, B. K., Improvement of drainage at wet pulp mold process, J. Korea TAPPI 36(3):52-59 (2004)
  3. Woo, Y.-K., Ryu, J.-Y., Kim, Y.-H., Song, B.-K. and Cho, N.-S., Application of the novel test machine, retention drainage analyzer(RDA) for wet-end analysis of papermaking process(I): Studies on formation of paper sheet molded by RDA, J. Korea TAPPI 34(4):1-6 (2002)
  4. Fabry, B., Roux, J.-C. and Carre, B. Characterization of friction during pulping: an interesting tool to achieve good deinking, J. Pulp Paper Sci. 27(8): 284-288 (2001)
  5. Roux, J.-C., Franc, N., Duffy, G. G. and Fabry, B., Shear Factor : a new way to characterize fiber suspension shear, TAPPI J. 84(8): 1-18 (2001)
  6. 류정용, 성용주, 환경친화형 완충포장재인 펄프몰드의 softness 및 생산효율 개선을 위한 기술 지원, 부품.소재종합기술지원사업 최종보고서, 산업자원부(2004)
  7. Shin, D.-S. and Ryu, J.-Y., Studies on the manufacturing of fine paper with the deinked pulp Effect of heat-induced accelerated aging treatment on the repulping properties of white ledger, J. Korea TAPPI 27(2):31-40 (1995)