• 융합신호처리학회논문지
• /
• 제14권2호
• /
• pp.105-109
• /
• 2013

There are the free space model, the direct-path and ground reflected model, Egli model, Okumura-Hata model in the representative propagational models. The measured results at the area of PNG area were used as the experimental data in this paper. The new proposed partial interval analysis method is applied on the measured propagation data in the cellular band. The interval for the analysis is divided from the entire 30 Km distance to 5 Km, and next to 1 Km. The best-fit propagation models are chosen on all partial intervals. The means and standard deviations are calculated for the differences between the measured data and all partial interval models. By using the 5 Km- or 1 Km- partial interval analysis, the standard deviation between the measured data and the partial propagation models was improved more than 1.7 dB.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.700-707
• /
• 2008

As plan connecting island to island or island to land is needed, a lot of long-span bridge is being designed lately in Southern part of Korea. With development of pile equipment, overhanging large-scaled concrete pile are adopted to foundation type of main tower or pylon. About the number of 15~30 group piles per tower foundation is designed to resist long-spaning super-structure load, but by restricted condition of site investigation cost, a few boring-hole tests are performed to identify sub-ground layers. Up to now, direct-curved method connecting two or three known boring logs and representative interval method are usually used to evaluate unknown depth and rock properties at locations where piles are constructed. Because this approach is not logical and so rough, much difference occurs between designed length of piles and real length of it. In this paper, using a lot of various prediction method(reciprocal distance method, inverse square distance method and kriging method etc.), we suggest optimum length of group piles.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1169-1175
• /
• 2008

The validation technique is classified with two methods whether to demand of additional experimental points. The method which requires additional experimental points such as RSME is actually impossible in engineering field. Therefore, the method which only use experimented points such as the cross validation technique is only available. But the cross validation not only requires considerable computational costs for generating metamodel each iterations, but also cannot measure quantitatively the fidelity of metamodel. In this research we propose a new validation technique for representative metamodels using an variance of metamodel and confidence interval information. The proposed validation technique computes confidence intervals using a variance information from the metamodel. This technique will have influence on choosing the accurate metamodel, constructing ensemble of each metamodels and advancing effectively sequential sampling technique.

• 대한음성학회지:말소리
• /
• 제56호
• /
• pp.147-158
• /
• 2005

In this paper, we are focused to develop the simplified speaker verification algorithm without background speaker models, which will be adopted in the portable speaker verification system equipped in portable terminals such as mobile phone and PMP. According to the tolerance interval analysis, the population of someone's speaker model can be represented by a suitable number of selected independent samples of speaker model. So we can make the representative speaker model and threshold under the specified confidence level and coverage. Using proposed algorithm with the number of samples is 40, the experiments show that the false rejection rate is $3.0\%$ and the false acceptance rate $4.3\%$, worth comparing to conventional method's results, $5.4\%\;and\;5.5\%$, respectively. Next step of research will be on the suitable adaptation methods to overcome speech variation problems due to aging effect and operating environments.

• 한국정보시스템학회:학술대회논문집
• /
• 한국정보시스템학회 1996년도 추계학술발표회 발표논문집
• /
• pp.205-210
• /
• 1996

The bootstrap procedure is suggested as a useful method for point and interval estimation of system availability. Its validity and robustness has been shown in special, but representative case, by various sampling experiments. Alternative to the bootstrap suggest themselves e.g. a variation of the 'F'technique, but remain to be evaluated, as do variations on the bootstrap itself.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 1996년도 추계 학술 발표회 발표논문집
• /
• pp.205-210
• /
• 1996

The bootstrap procedure is suggested as a useful method for point and interval estimation of system availability . Its validity and robustness has been shown in special , but representative case, by various sampling experiments. Alternative to the bootstrap suggest themselves (e.g. a variation of the 'F' technique, but remain to be evaluated, as do variations on the bootstrap itself.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2879-2882
• /
• 2003

Obstructive Sleep Apnea(OSA) is a representative symptom of sleep disorder which is caused by airway obstruction. OSA is usually diagnosed through the laboratory based Polysomnography(PSG) which is uncomfortable and expensive. In this paper, the detection method for OSA events, using ECG, has been developed. The proposed method uses the ECG data sets provided from Physionet. The features for OSA events detection are the average and standard deviation of 1 minute R-R interval, power spectrum of R-R interval and S-pulse amplitude from data sets. These features are applied to the input of Neural Network. To evaluate the method, we used the another ECG data sets. And we achieved sensitivity of 89.66％, specificity of 95.25％. So, we can know that the features proposed in this paper are important to detect OSA.

• 대한교통학회지
• /
• 제23권3호
• /
• pp.109-123
• /
• 2005

본 논문에서는 지방부 간선도로에서 제공되는 단속류 구간통행시간 정보의 체계적인 수집 분석을 위해 현재 일부 국도에서 운영중인 차량번호판 매칭방식 AVI(자동차량인식장치 : Automated Vehicle Indentification)로부터 수집된 자료의 적합성분석 및 단속류 구간통행시간 자료의 적정집락간격(optimal aggregation interval)산정을 위한 통계적 결정방법을 연구하였다. 연구결과 차량번호판 매칭방식 AVI 수집자료는 통과위주의 대표차로상에서만 수집되기 때문에 차로간의 속도차가 크게 나타나는 단속류 구간에서는 전차로에 대한 통행시간 수집자료와 교통특성에 차이가 있으므로 현재의 차량번호판 매칭방식 ANI 표본수집 자료를 통해 산출된 구간통행기간을 구간의 대표값으로 적용하는 데에는 문제가 있어 이에 대한 추가적인 검토가 필요하다는 결론을 얻었다. 그리고, 단속류 구간의 통행시간 정보제공을 위한 수집자료의 적정집락간격 결정방법으로 점추정과 구간추정방법을 적용하여 모형을 개발하고, 이 모형을 적용한 결과 점추정모형이 구간추정모형보다 집락간격결정에 민감하고 보다 정확한 적정집락간격 선정이 가능한 것으로 밝혀졌으며, 단속류 구간의 적정집락간격은 5분으로 산정되어 현재 적용되고 있는 단속류 구간 5분 집락간격은 적정한 것으로 판단된다.

• 한국의류학회지
• /
• 제29권8호
• /
• pp.1102-1113
• /
• 2005

The propose of this study is to develop the optimal sizing system of ready-to-wear f3r elementary school girls using a newly invented statistical technique. The body measurements was classified by the method that equalizes the distribution of the subjects using the probability density function, to theoretically systemize a method to determine a size range of ready-to-wear for elementary school girls between 6 to 12 years old. The statistical method were 1) The total of 11 height groups, which size interval from one another is 6 cm that is an average height gap between each age. 2) In order to determine an approximate figure (m ${\times}$ n) to establish the appropriate sizes far each height group that fit to the combinations of bust and hip girth, which based on their means and standard deviations on the probability density curve to produce the standard normal distribution. 3) m and n were aligned by 4cm -the grading increments used for patterns making- and determined the size ranges by confirming the approximate figures of m and n. 4) The representative values were determined by an area ratio calculated by dividing the area determined from the range of bust and hip girth with the representative value. Considering the characteristics of subjects' distribution, the area ratios was used. 5) Weight was calculated by seeking a growth exponent for each age and multiplying it by the number of girls that fit to each size range. As sections that show the highest weight are more likely sought by the consumers, these sections were determined as the optimal size standards. 6) This optimal sizing system consists of sizes determined by the optimal size standards and its sizes are marked with height, bust and hip girth.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권6호
• /
• pp.276-280
• /
• 2001

This paper presents the result of a study on the distribution characteristics of salt contaminants in the west coast region, from Inchon to Yearsoo, of South Korea. To evaluate the distribution characteristics of salt contaminants, we had measured the equivalent salt deposit density(ESDD) with brush wiping method for thirteen month(from May 1999 to June 2000). Under the consideration on the measuring interval and method, normalization method was applied for the ESDD data. Besides the measurement, the chemical analysis (chromatography) was carried to investigate the relationship, between the electrical property and the amount of specific ingredient, such as sodium, magnesium and chloride. From the result, we could get the representative value of contamination for each site and distribution characteristics of salt contaminants with the distance from sea in the west coast.