• Journal of Internet Computing and Services
• /
• v.14 no.1
• /
• pp.53-62
• /
• 2013

It is common among users to have multiple computing devices as well as to access their files or do work at different locations. To achieve file consistency as well as mobility in this scenario, an efficient approach for workspace synchronization should be used. However, file synchronization alone cannot guarantee the mobility of work environment which allows activities to be resumed at any place and time. This paper proposes a ubiquitous synchronization approach which provides cloud-based access to a user's workspace. Efficient synchronization is achieved by combining session monitoring with file system management. Experimental results show that the proposed mechanism outperforms Cloud Master-replica Synchronization in terms of number of I/O operations, CPU utilization, as well as the average and maximum latencies in responding to client requests.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.4
• /
• pp.262-267
• /
• 2014

Recently, long pulses are transmitted for target detection in active sonar application. Matched filtering implemented by simple convolution algorithm, requires massive computational power for long replica. The computational loads are reduced significantly by implementing the convolution in the frequency domain with overlap add method, but the performance degrades for specified input/output system delay which constrains the size of FFT function. For performance improvement, the replica could be partitioned into uniform blocks (FDL) by re-using IFFT operations, or variable blocks of increasing length (MC) by using the largest possible blocks to calculate the convolution. In this paper, by combining the strong points of the two methods, we propose a new filter partition structure that allows for further optimization of the previous two methods.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.2
• /
• pp.124-129
• /
• 2017

PURPOSE. This study evaluated the effect of span length on the adaptation of implant-supported cobalt chromium frameworks fabricated by three techniques. MATERIALS AND METHODS. Models with two solid abutment analogs at different inter-abutment distances were digitized using a laboratory scanner. Frameworks of two-, three-, and four-unit fixed prostheses were designed by a computer. Six dots with a diameter of 0.2 mm were preset on the surface of each framework. A total of 54 implant-supported cobalt chromium frameworks were fabricated by milling, selective laser melting (SLM), and cast techniques. The frameworks were scanned and exported as Stereolithography files. Distances between two dots in X, Y, and Z coordinates were measured in both the designed and fabricated frameworks. Marginal gaps between the framework and the abutments were also evaluated by impression replica method. RESULTS. In terms of distance measurement, significant differences were found between three- and four-unit frameworks, as well as between two- and four-unit frameworks prepared by milling technique (P<.05). Significant differences were also noted between two- and three-unit frameworks, as well as between two- and four-unit frameworks prepared by cast technique (P<.05). The milling technique presented smaller differences than the SLM technique, and the SLM technique showed smaller differences than the cast technique at any unit prostheses (P<.05). Evaluation with the impression replica method indicated significant differences among the span lengths for any fabrication method (P<.05), as well as among the fabrication methods at any unit prostheses (P<.05). CONCLUSION. The adaptation of implant-supported cobalt chromium frameworks was affected by the span length and fabrication method.

• Journal of the Korean Society of Costume
• /
• v.66 no.3
• /
• pp.135-146
• /
• 2016

This study is examines the replica of the excavated braided belt that tied the Daedae(大帶) of Simui(深衣). This study aims to comprehend the structure and color of the excavated braided belt, and to reproduce the Jodae(braided belt) of Kim Won-taek(1683-1766) clan, which was excavated in Cheongju. Black dye was used on the belt since it was the color that remained the most on the artifact. This study in the color black is focused on the Cheungchosack in Jeonggongji(展功志) from the first volume of 'Yimwongyeongjeji(林圓經濟志)'. From the Kim Won-taek clan, the braided belt of Simui of Kim Won-taek and his son, Kim Shang-jik(1716-1773), have been excavated. The blackness of the braided belt was more apparent in Kim Shang-jik compared to Kim Won-taek, and also Kim Shang-jik's braided belt was darkbrown. So I mixed gallnut, green vitriol, ash tree and catechu, the ingredient of bluish black, in equal proportions. Kim Won-taek's silk thread was dyed 3 times and Kim Sang-jik's silk thread was dyed 5 times to reproduce the original belt. Based on the information from the 'Saryepyenlam(四禮便覽)' that the Jo was weaved with five colored threads, I reproduced the Jo with sophora flowers, gardenia, amur cork tree, safflower, madder and indigo sediment. Yeokeum organization(interlacing), which is a Jodae woven strands of both sets of 15 repeats construction were in the mixed organization of 3/2 and 2/2.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.1
• /
• pp.42-46
• /
• 2010

This study was performed to investigate anti-wrinkle effects of Acanthopanax senticosus (AS) on ultraviolet B (UVB)-induced photoaging with wrinkle formation. AS extract showed higher DPPH radical scavenging activity (3 ${\mu}g/mL$ as $IC_{50}$) and collagenase inhibition (1.52 mg/mL as $IC_{50}$) than those of ascorbic acid (50 ${\mu}g/mL$ and 2.17 mg/mL, respectively). Cell proliferation and type I pN collagen synthesis were increased by 11.4% and 96.4%, respectively, compared with non treatment control. In vivo, SKH-1 hairless mice were administrated AS 400 mg/kg for 10 weeks with UVB irradiation three times a week. After 10 weeks, a visual assessment and replica assay were performed on each mouse. According to visual assessment of close-up photos and skin replica, oral administration of A. senticosus affected on inhibition of wrinkle formation caused by UVB irradiation on the skin of mice as compared to the vehicle treated control mice. These results indicated that A. senticosus could protect skin wrinkle formation caused by collagen synthesis of fibroblast cells and photo-irradiation of UVB in hairless mice.

• Journal of Navigation and Port Research
• /
• v.29 no.10 s.106
• /
• pp.877-882
• /
• 2005

It is necessary that Fail-Safe Seaway technology providing a continuous navigation solution though fault of navigation system is occurred in sea. This paper focus on signal processing of GPS receiver, one of receivers using the software radio technology to implement a integrated radio navigation system including satellite-based and ground-based navigation systems. It is difficult to implement the software GPS receivers using a commercial processor because of the heavy computational burden for processing the GPS signals in real time. This paper proposes an efficient multi-bit GPS signal processing scheme to reduce the computational burden for processing the GPS signals in the software GPS receiver. The proposed scheme uses a compression concept of the multi-bit replica signals and patterned look-up table method to generate the correlation value between the GPS signals and the replica signals.

• The KIPS Transactions:PartD
• /
• v.10D no.4
• /
• pp.647-654
• /
• 2003

The replication of data is used to increase its availability and to improve the performance of a system. The distributed database system has to maintain both the database consistency and the replica consistency. This paper proposes an algorithm which resolves the conflict of the operations by using the mechanism based on the structure that the replicas of each data item are hierarchically organized. Each update is propagated along the tree based on the fact that the root of each data item is the primary replica in partially replicated databases. The use of a hierarchy of data may eliminate useless propagation since the propagation can be done only to sites having the replicas. In consequence, the propagation delay of updates may be reduced. By using the timestamp and a compensating transaction, our algorithm resolves the non-serializability problem caused by the conflict of operations that can happen on the way of the update propagation due to the lazy propagation. This resolution also guarantees the data consistency.

• Journal of Welding and Joining
• /
• v.15 no.1
• /
• pp.101-108
• /
• 1997

In repaired weldment of ASTM A-470 class 8 high pressure stream turbine rotor steel, creep rupture life was studied in relation with carbide morphology. Carbides were identified using carbide extraction replica method. A retired rotor has molybdenum rich carbide $M_2C$, lndacochea vanadium rich carbide $M_4C_3$, and chromium rich carbides $M_{23}C_6$and $M_7C_3$. Weldments ruptured at ICHAZ showed that some of carbides have been transformed into spherical types of coarsened carbides at ruptured area. Those carbides were revealed as molybdenum rich $M_6C$ carbide and they provided cavitation sites due to molybdenum depletion around $(M_6C)$ carbide. However coarsened $M_6C$ and $M_{23}C_6$ carbides were observed at ruptured area in case of ruptured at CGHAZ.

• Korean Journal of Crystallography
• /
• v.11 no.4
• /
• pp.212-223
• /
• 2000

A stochiometric mix of CuInTe₂ polycrystal was prepared in a honizonatal furnace. To obtain the single crystal thin films, CuInTe₂ mixed crystal was deposited on throughly etched GaAs(100) by the HWE system. The source and substrate temperatures were 610℃ and 450℃ respectively, and the thickness of the deposited single crystal thin film was 2.4㎛. CuInTe₂ single crystal thin film was proved to be the optimal growth condition when the excition emission spectrum was the strongest at 1085.3 nm(1.1424 eV) of photoluminescence spectrum at 10 K, and also FWHM of Double Crystal X-ray Rocking Curve (DCRC) was the smallest, 129 arcsec. The Hall effect on this sample was measured by the method of Van der Pauw, and the carrier density and mobility dependent on temperature were 9.57x10/sup 22/ electron/㎥, 1.31x10/sup -2/㎡/V·s at 293 K, respectively. The ΔCr(Crystal field splitting) and the ΔSo (spin orbit coupling splitting( measured at f10K from the photocurrent peaks in the short wavelength of the CuInTe₂ single crystal thin film were about 0.1200 eV, 0.2833 eV respectively. From the PL spectra of CuInTe₂ single crystal thin film at 10 K, the free exciton (E/sub x/) was determined to be 1064.5 nm(1.1647 eV) and the donor-bound exciton(D/sup 0/, X) and acceptor-bound exciton (A/sup 0/, X) were determined to be 1085.3 nm(1.1424 eV) and 1096.8 nm(1.1304 eV0 respectively. And also, the donor-acciptor pair (DAP)P/sub 0/, DAP-replica P₁, DAP-replica P₂ and self-activated (SA) were determined to be 1131 nm (1.0962 eV), 1164 nm(1.0651 eV), 1191.1 nm(1.0340 eV) and 1618.1 nm (0.7662 eV), respectively.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.35 no.4
• /
• pp.317-323
• /
• 2009

Chronic exposure of solar ultraviolet (UV) light to human skin results in photoaging with wrinkle formation. This study was performed to investigate anti-wrinkle effects of Lindera obtusiloba extract (LO) on UVB-induced wrinkle formation. We first measured cell proliferation and type I pN collagen synthesis activities in normal human dermal fibroblasts. Cell proliferation and type I pN collagen synthesis were increased by 33.8 % and 91.8 %, respectively, compared with no treatment control. SKH-1 hairless mice were topically applied 5 % LO solution for 10 weeks with UVB irradiation three times a week. After 10 weeks, a visual assessment and replica assay were performed on each mouse. According to visual assessment of close-up photos and skin replica, application of 5 % LO solution inhibited UV-induced wrinkle formation in mouse skin as compared to the vehicle-applied control mice. These results indicated that LO could protect skin wrinkle formation caused by chronic photo-irradiation in hairless mice.