• Journal of Chest Surgery
• /
• 제17권4호
• /
• pp.557-564
• /
• 1984

Of the valve replacement patients operated between 1983 and June, 1984, 75 patients need more than 60 minutes of aortic cross-clamping time. 42 patients performed single valve replacement [35 MVR, 7 AVR with or without TAP] and remainder needs double valve replacement with or without TAP. The average aortic clamping time was 95.1 minutes. They need 30 minutes more extra-corporeal circulation time than aortic clamping time. The patients were divided into two groups by usage of cardioplegic solution. Group I [n=31] with Bretschneider solution and group II with potassium cardioplegic solution [M.G.H. modification] were analyzed by extra-corporeal circulation data,/CG and Echocardiography findings, and clinical data. There was no difference between two groups in Bivon addition amounts [cc/kg] and E.F. and S.F. by echocardiography, group I need 1 more electrocardioversion to convert sinus rhythm postoperatively. Also no difference could be found in patients whose preoperative C.I. was above 2.0 between two group. But significant postoperative decrease in E.F. was found in group I whose preoperative C.I. was below 2.0. Relatively longer ECC time was also needed in same group. Ischemic changes in ECG and low cardiac output syndrome was, however more prevalent in groupII. As a whole, the clinical data was satisfactory with both cardioplegic solution in clinical practice.

• 한국축산식품학회지
• /
• 제24권3호
• /
• pp.216-220
• /
• 2004

To investigate the effect of feeding the fermented food wastes (FFW) on meat quality, twenty pigs produced from four treatments with different mixing rates of FFW [100% concentrate (control), 25% replacement with FFW (25% FFW), 50% replacement with FFW (50% FFW) and 100% fermented food wastes (100% FFW)] were slaughtered. Carcass characteristics were differentiated if FFW replacement rate was higher than 50%. The proximate compositions of hams and loins in control pigs were not different from (p>0.05) those of the FFW replacements, regardless of mixing rate of FFW replacement. Drip loss of pork loin increased (p<0.05) with increased rate of FFW replacement. Hunter color values were affected (p<0.05) by the FFW replacement and storage time, while not significantly changed (p>0.05) when replaced with lower than 25% FFW. With replacing more than 50% FFW, redness values tended to be decreased, while yellowness values increased. Aerobic plate counts (APC) were rapidly increased 12 d for the control and 8 d for FFW replacement, and microbial stability seemed to be lowered when the rate of FFW replacement rate was more than 50%. These results indicated that the replacement of concentrate diets with FFW was still nutritious feedstuffs for pig diet, however, no more than 50% FFW replacement was recommended to have similar effect to those with the control (100% concentrate).

• Journal of Chest Surgery
• /
• 제7권2호
• /
• pp.189-200
• /
• 1974

The mitral valve replacement with Beall prosthetic valve was performed on three patients, and double valve replacement. aortic and mitral valve, was performed in this department.1) The preoperative studies about the first case were compatible with mitral steno-insufficency.The diseased mitral valve was replaced with the medium sized Beall prosthetic valve under the cardiopulmonary hypass using hypothermic hemodilution technique. The total perfusion time was eighty minutes. Immediate postoperative course was smooth, but this patient was died of asphyxia due to tracheomalacia complicated after tracheostomy 3 months after operation. Autopsy on this patient revealed that no thrombus and no ball variance could be found, and endothelization on the valve cuff was satisfactory. 2) The preoperative studies on the second case were compatible with mitral insufficiency. The diseased mitral valve was replaced with the medium sized Beall prosthetic valve under the cardiopulmonary bypass using hypothermic hemodilution technigue. The total perfusion time was 123 minutes. This patient was discharged in good condition and follow-up study after 16 months revealed the patient had enjoyed healthy life. 3) The preoperative studies about the third case were compatible with aortic insufficiency and mitral stenoinsufficiency. The diseased valves were replaced with type 2 sutureless Magovern aortic valve and the medium sized Beall mitral prosthesis under cardiopulmonary bypass using hypothermic hemodilution technIque and coronary artery perfusion. The total perfusion time was 155 minutes. This patient was discharged in good condition, but thromboembolism was developed 2 months after discharge. 4) The preoperative studies about the fourth case were compatible with mitral insufficiency. The diseased mitral valve was replaced with the medium sized Beall prosthetic valve. The total perfusion time was 132 minutes. The atrioventricular block developed just after operation but converted to normal sinus rhythmn on the third postperative day. The preoperative NYHA functional classification IV was converted to Class 1 or 11 at the time of discharge and this patient enjoyed healthy life. Attendum; The fifth case, nineteen years old male with mital insufficiency underwent Beall valve replacement and his course was uneventful 2 weeks after operation.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권4호
• /
• pp.287-295
• /
• 2022

The GNSS coordinate time series is used as important data for geophysical analysis such as terrestrial reference frame establishment, crustal deformation, Earth orientation parameter estimation, etc. However, various factors may cause discontinuity in the coordinate time series, which may lead to errors in the interpretation. In this paper, we describe the discontinuity in the coordinate time series due to the equipment replacement for domestic GNSS stations and discuss the change in movement magnitude and velocity vector difference in each direction before and after discontinuity correction. To do this, we used three years (2017-2019) of data from 40 GNSS stations. The average magnitude of the velocity vector in the north-south, east-west, and vertical directions before correction is -12.9±1.5, 28.0±1.9, and 4.2±7.6 mm/yr, respectively. After correction, the average moving speed in each direction was -13.0±1.0, 28.2±0.8, and 0.7±2.1 mm/yr, respectively. The average magnitudes of the horizontal GNSS velocity vectors before and after discontinuous correction was similar, but the deviation in movement size of stations decreased after correction. After equipment replacement, the change in the vertical movement occurred more than the horizontal movement variation. Moreover, the change in the magnitude of movement in each direction may also cause a change in the velocity vector, which may lead to errors in geophysical analysis.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제5권1호
• /
• pp.167-180
• /
• 2005

Design of a degradation test without replacement is considered based on tightened critical value to reduce the evaluation testing time. The sample size, number of inspections, and the critical values are determined to assure the same probability of acceptance when the testing time is reduced to some degree. Photo-diode balance of an optical pickup is analyzed as a case study.

• 한국국방경영분석학회지
• /
• 제7권2호
• /
• pp.100-113
• /
• 1981

A replacement policy for a finite time span is proposed for the cumulative process where an item can fail only when the total amount of deterioration exceeds a prespecified failure level. The optimal deterioration limit level is determined to minimize the total cost expected per unit for a given time span. An illustrative example in case of periodically inspected reformer tubes in ammonia plant is also presented.

• 대한안전경영과학회지
• /
• 제3권4호
• /
• pp.91-101
• /
• 2001

This paper is to develop replacement models under minimal repair with exponential polynomial wavelet failure rate function. Wavelets have good time-frequency localization, fast algorithms and parsimonious representation. Also this study is presented along with numerical examples using sensitivity analysis for exponential polynomial trigonometric failure rate function.

• Advances in concrete construction
• /
• 제6권2호
• /
• pp.103-121
• /
• 2018

This paper reports the effects of coarse and fine recycled concrete aggregates (RCA) on fresh and hardened properties of self-compacting concrete (SCC) containing ground granulated blast-furnace slag (GGBFS) as cement replacement. For this purpose, three SCC mixes groups, were produced at a constant water to binder ratio of 0.38. Both fine and coarse recycled aggregates were used as natural aggregates (NA) replacement at different substitution levels of 0%, 25%, 50%, 75% and 100% by volume for each mix group. Each group, included 0, 15% or 30% GGBFS as Portland cement replacement by weight. The SCC properties investigated were self-compactability parameters (i.e., slump flow, T500 time, V-funnel flow time, L-box passing ability and sieve stability), compressive strength, capillary water absorption and water penetration depth. The results show that the combined use of RCA with GGBFS had a significant effect on fresh and hardened SCC mixes. The addition of both fine and coarse recycled aggregates as a substitution up to 50% of natural aggregates enhance the workability of SCC mixes, whereas the addition from 50 to 100% decreases the workability, whatever the slag content used as cement replacement. An enhancement of workability of SCC mixes with recycled aggregates was noticed as increasing GGBFS from 0 to 30%. RCA content of 25% to 50% as NA replacement and cement replacement of 15% GGBFS seems to be the optimum level to produce satisfactory SCC without any bleeding or segregation. Furthermore, the addition of slag to recycled concrete aggregates of SCC mixes reduces strength losses at the long term (56 and 90 days). However, a decrease in the capillary water absorption and water permeability depth was noticed, when using RCA mixes with slag.

• 한국ITS학회 논문지
• /
• 제6권3호
• /
• pp.174-182
• /
• 2007

현재 국내 ITS는 현장장비 유지관리에 대한 연구 및 고장관련 DB가 부족하여 예비부품수 및 교체시기 산정에 대한 규정이 없는 실정이다. 이에 본 연구는 실제 고장이력자료를 갖고 신뢰성 분석을 실시하여 단거리전용통신(DSRC)방식 노변기지국(RSE)의 예비부품수 및 교체시기를 산정하였다. 전체 수집기간동안의 고장자료는 욕조곡선의 형상을 나타내어 우발고장기간의 자료로 신뢰성 분석을 실시하였으나 고장 수명 분포 중 적합되는 분포가 없었으며, 이러한 사실은 본 연구대상 노변기지국(RSE)의 경우 통계적 모형에 의한 예방 정비가 어려움을 의미한다. 따라서, 본 연구는 실증적인 방법으로 하자보수기간 $1{\sim}2$년 동안의 수리비용 및 고장빈도 이력자료를 활용하여 노변기지국(RSE)의 교체여부를 결정하는 방법 및 필요 예비부품수를 산정하는 방법을 제안하였다. 향후에는 노변기지국(RSE) 외에 다른 ITS 장비에 대한 신뢰성 분석이 필요하다.

• 한국건설순환자원학회논문집
• /
• 제5권4호
• /
• pp.450-457
• /
• 2017

본 연구에서는 EXFG를 활용하여 실제 현장 적용이 가능한 고품질의 바닥모르타르를 개발하고자 하였는데, 그 결과를 요약하면 다음과 같다. 먼저, ALS의 치환율이 증가할수록 플로치도 비례하게 증가하는 것으로 나타났으며, 이를 이용한 EXFG의 경우 반대로 치환율이 증가할수록 유동성은 감소하는 경향을 나타냈다. 또한, 응결시간의 경우 ALS 치환율이 5%인 배합에서는 EXFG의 치환율에 관계없이 Plain 대비 응결시간이 약 5~20% 이상 단축되는 것으로 나타났다. 압축강도의 경우 ALS 치환율 0%, 5%에서 EXFG 치환율이 1% 이내일 때 전반적으로 강도는 증가하였으며, ALS 치환율이 10% 이상일 경우에는 오히려 강도가 저하 되는 것으로 나타났다. 건초수축길이변화율의 경우 ALS 치환율 0%, 5%에서는 EXFG 치환율에 관계없이 Plain 대비 건조수축길이변화율이 약 10~25% 이상 감소하는 것으로 나타났다.