• Journal of Biosystems Engineering
• /
• v.28 no.6
• /
• pp.537-544
• /
• 2003

The objectives of this study were to investigate the failure characteristics of a total of 90 parts of tractor driveline, and to predict their average annual demands required to perform the after-sales service. The failure characteristics such as failure mode, mean time between failures, characteristic life and reliability were analyzed using the data collected through the experienced mechanics at the part centers of the tractor manufacturers. The analysis was based on the assumption that the failure distribution follows the Weibull distribution. The average annual demands were also predicted for the replacement parts using the mean time between failures and the renewal theory based on the Weibull distribution. The results of the study revealed that the driveline parts failure was mostly from wearout and their average characteristic life is about 1.760 hours. The estimated mean time between failures was in a range of 670∼3,740 hours and reliability in a range of 40∼60％. The annual replacement demands were in a range of 4∼45 for a service of 100 tractors.

• Fire Science and Engineering
• /
• v.22 no.3
• /
• pp.153-161
• /
• 2008

The duty of fire officials are very complicated and various that a subject replacement for the fire officials' public examination for service is being required. The purpose of this study is to investigate the actual conditions of the fire officials' public employment system and find out current problems of it, to reconsider the speciality of the examination based on them, and to suggest a subject replacement for the examination to evaluate the duty accomplishment ability. This study presents not only assuring the speciality of fire officials but also the desirable plans to execute the Fire Relating Act effectively by replacing introduction of political science with fire service administration and adding the Fire Relation Law which is more connected on the local fire officials public written examination for service with duty.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.7
• /
• pp.1669-1679
• /
• 1996

In this paper, we address the problem of how to replace huffers in multimedia database systems with time-varying skewed data access. The access pattern in the multimedia database system to support audio-on-demand and video-on-demand services is generally skewed with a few popular objects. In addition the access pattem of the skewed objects has a time-varying property. In such situations, our analysis indicates that conventional LRU(least Recently Used) and LFU(Least Frequently Used) schemes for buffer replacement algorithm(ABRN:Adaptive Buffer Replacement using Neural suited. We propose a new buffer replacement algorithm(ABRN:Adaptive Buffer Replacement using Neural Networks)using a neural network for multimedia database systems with time-varying skewed data access. The major role of our neural network classifies multimedia objects into two classes:a hot set frequently accessed with great popularity and a cold set randomly accessed with low populsrity. For the classification, the inter-arrival time values of sample objects are employed to train the neural network.Our algorithm partitions buffers into two regions to combine the best roperties of LRU and LFU.One region, which contains the 핫셋 objects, is managed by LFU replacement and the other region , which contains the cold set objects , is managed by LRUreplacement.We performed simulation experiments in an actual environment with time-varying skewed data accsee to compare our algorithm to LRU, LFU, and LRU-k which is a variation of LRU. Simulation resuults indicate that our proposed algorthm provides better performance as compared to the other algorithms. Good performance of the neural network-based replacement scheme means that this new approach can be also suited as an alternative to the existing page replacement and prefetching algorithms in virtual memory systems.

• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.1
• /
• pp.16-20
• /
• 2000

There have been little reports on the degradation of medium-carbon steel tubes served at high temperature for a long period. The purpose of this research was to provide the information of the proper replacement span of the tubes with the new ones. We investigated the medium-carbon steel tubes which were used at petrochemical plant for about 50,000 hrs to examine their mechanical properties and microstructures. Experimental results showed that the tubes satisfied the specification of ASTM despite such a long period of service, but mechanical properties, especially charpy impact values, were reduced. It concludes that the tubes on service at the plants needs a periodical inspection.

• Journal of Korean Society for Quality Management
• /
• v.42 no.1
• /
• pp.1-14
• /
• 2014

Purpose: In this paper, the minimal repair-replacement warranty policy is used to carry out a warranty cost analysis with warranty servicing times and failure times that are statistically correlated to bivariate distributions. Methods: Based on the developed approach by Park and Pham (2012a), we investigate the property of the Freund's bivariate exponential distribution and obtain the number of warranty services using the field data to conduct the warranty cost analysis. Results: Maximum likelihood estimates are presented to estimate the parameters and the warranty model is investigated using a Freund's bivariate exponential distribution. A numerical example is discussed to deal with the applicability of the developed approach in the paper. Conclusion: A novel approach of analyzing the warranty cost is proposed for a product in which failure times and warranty servicing times are used simultaneously to investigate the eligibility of a warranty claim.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.1
• /
• pp.193-198
• /
• 2010

This study aimed at presenting the improvement plan for estimation of the repair and replacement cycle to analyze these current problems by considering the repair and replacement cycle theoretically and examining estimation status of home and abroad, and then drawing implication and problem based on brainstorming and expert opinion. The findings of a study is as follows. First, the problem is, for the domestic, that there is no clear standard of division to the cycle of repair and replacement and the repair and replacement cycle considering capability to deal with the change by construction method, development of the function of material and the number of years of progress is not being applied. That is, an estimation of economical repair and replacement cycle which considers the case that a large scale repair with the level of remodeling is done between 25 years and 35 years is necessary. For estimating the repair and replacement cycle, foreign country is providing this according to the use or the level of function of a building, but it is not the case for the domestic. A characteristic of each building should be reflected and the standard of estimation of the repair and replacement cycle to new construction material or method should be prepared to improve this. In addition, the method of classification of the subject item for the repair and replacement is necessary to be reorganized to be able to apply the standard of initial construction item of a building. Also, it is considered that a service standard which can reset the repair and replacement cycle based on status of a building with escape from the existing definite setup of the repair and replacement cycle through the management of background data of the repair and replacement is going to be necessary.

• Journal of Biosystems Engineering
• /
• v.39 no.4
• /
• pp.261-266
• /
• 2014

Purpose: This study was conducted to serve as a basis for strengthening policy support and R&D to improve the domestic and international competitiveness of domestic agricultural machinery. Levels of satisfaction among farmers and service engineers were analyzed regarding the current quality of agricultural machinery and the primary consumers' propensity for replacement purchases. Methods: A survey was carried out targeting farmers in over 150 townships and 300 villages in South Korea who collectively used 711 tractors, 286 rice transplanters, and 221 combine harvesters. Furthermore, agricultural machinery service engineers from 20 different after-services were surveyed regarding the quality of main components in domestic agricultural machinery versus those in imported agricultural machinery. Results: The farmers' overall quality satisfaction ratings for tractors, rice transplanters, and combine harvesters ranged from 57.1% to 62.6% in consideration of operating performance, failure rate, and durability. Compared with imports, satisfaction ratings for domestic agricultural machinery were 19.1%p to 38.1%p lower for quality. Regarding engines, transmissions, hydraulics, planters, reapers, threshers, and electrical components, only 5.3% to 25.0% of service engineers indicated that domestic agricultural machinery was higher in quality compared with imports. By contrast, 33.3% to 78.9% of those surveyed indicated that domestic components were lower in quality compared with imports. Intent to purchase replacement agricultural machinery at the end of their respective products' lifecycles was indicated that they planned to purchase imported tractors, rice transplanters, and combine harvesters comprised 25.2%, 46.9%, and 43.9%, respectively. This clearly shows that a very high percentage of farmers were satisfied, particularly for transplanters and combine harvesters. Conclusions: The level of desire for purchasing imported agricultural machinery was very high among those who expressed intent to purchase replacement machinery. Therefore, strong policy support and R&D for domestic agricultural machinery is critical for improving competitiveness on the domestic and foreign markets.

• The Korean Journal of Ceramics
• /
• v.7 no.1
• /
• pp.41-44
• /
• 2001

A composite of $Ca_3$(PO$_4$)$_2$ and MgAl$_2$O$_4$ spinel is biologically active and has enduring strength. Its strength depends on the spinel phase. The flaws in the spinel depend on the grain size of the calcium phosphate phase and are not altered by dissolution. The calcium phosphate, ${\alpha}$ tri-calcium phosphate, controls the tissue response. Bone bonds to the implant. A design for a bone graft as a replacement for a section of the diaphysis of a canine femur provides for tensile, compressive, torsional and bending load; and for the physiological processes of bonding and remodeling. A bone plate, used to stabilize the implant at time of surgery was removed after about one year. Over seven years of service have been achieved without internal or external fixation.

• IE interfaces
• /
• v.13 no.3
• /
• pp.539-547
• /
• 2000

An architecture of a Web-based Decision Support system for mathematical analysis is presented. Front-end modules provide web-client GUI environment for mathematical analysis. The networking architecture is built upon client/server system by Java socket and accesses database by JDBC in WWW. Back-end modules provide decision supporting service and data management for mathematical programming analysis. In the back-end any analysis tools, such as mathematical optimizer, simulation package, or statistics package can be used. As an application example for this implementation, optimal facility replacement decision problem is selected. In the implementation the optimal facility replacement decision problem is formulated as a shortest path problem. It uses Oracle DB and CPLEX package as the mathematical optimizer. While ORAWeb is designed and implemented on the optimal facility replacement problem, it can easily be extended to any decision supporting problems that would require mathematical optimization process.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.277-279
• /
• 2006

Due to the numerous environmental factors, cracks and corrosion are frequently occured especially in old steel bridge, which deteriorate the structural integrity; thus bring about the problems of structural safety of the steel bridge. Therefore, repair and reinforcement are required for the damaged structure. the replacement repair welding method is spotlighted for its brilliant features, i.e. it can be achieved without incurring traffic dislocation. the method cuts the damaged parts and replaces them with new steel plate by welding under live loads. However, the mechanical behavior of the welded joints under cyclic loads due to the traffic which passes along bridge is not clarified. In this paper, the fatigue strength of the replacement repair welded joints was investigated in order to improve reliability in the repair welded joints of old steel bridge.