• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.87-91
• /
• 2015

For construction projects it is imperative that site management gives the highest priority to planning safe site evacuation for all foreseeable emergencies, including earthquakes and typhoons which are often experienced in Japan. This is especially important and even more critical for high risk projects involving underground works, such as Tunneling & Pneumatic Caissons. Based on the safety regulation of underground works, a back-up power supply system must be provided during the construction period at all times. Often, fluorescent lamps with re-chargeable batteries are provided for infrequent emergency cases, however these have a questionable useable life span and thus need careful maintenance and periodical replacement. In this paper we focused on using the phosphorescence materials to indicate the evacuation direction. As a result, it was confirmed that the phosphorescence materials were considered useful in reducing panic and facilitating a controlled evacuation in the event of a total black-out due to power failure.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.6
• /
• pp.3074-3091
• /
• 2019

With the widespread use of the Internet, services for providing large-capacity multimedia data such as video-on-demand (VOD) services and video uploading sites have greatly increased. VOD service providers want to be able to provide users with high-quality keyframes of high quality videos within a few minutes after the broadcast ends. However, existing keyframe extraction tends to select keyframes whose quality as a keyframe is insufficiently considered, and it takes a long computation time because it does not consider an HD class image. In this paper, we propose a keyframe selection method that flexibly applies multiple keyframe quality metrics and improves the computation time. The main procedure is as follows. After shot boundary detection is performed, the first frames are extracted as initial keyframes. The user sets evaluation metrics and priorities by considering the genre and attributes of the video. According to the evaluation metrics and the priority, the low-quality keyframe is selected as a replacement target. The replacement target keyframe is replaced with a high-quality frame in the shot. The proposed method was subjectively evaluated by 23 votes. Approximately 45% of the replaced keyframes were improved and about 18% of the replaced keyframes were adversely affected. Also, it took about 10 minutes to complete the summary of one hour video, which resulted in a reduction of more than 44.5% of the execution time.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.2
• /
• pp.121-133
• /
• 2021

This study set up the estimates of leakage management efficiency evaluation and leakage management goal that could be used in local water distribution networks efficiency business and modernization business. The data were analyzed using data envelopment analysis and multiple regression analysis. To this end, with leakage management input indices concerning leakage reduction activities (e.g., aged pipe replacement, water meter replacement, leakage restoration, and leakage detection) and leakage management calculation indices (e.g., the increase of revenue water ratio and the reduction of leakage ratio), the data on 22 K-water consignment local water supply systems were analyzed for the years from 2004 through 2018. Using the results of efficiency analysis by data envelopment analysis, the other DMUs (Decision Making Unit) benchmarked the DMU with the highest efficiency to maximize the leakage management efficiency for all DMUs. Through this, leakage management goal estimates were drawn with the input indices of four leakage reduction activities and calculation indices of the increase of revenue water ratio and the reduction of leakage ratio by multiple regression analysis for each group based on the revenue water ratio and leakage ratio. The correlation coefficients of the leakage management goal estimate for the criteria for the revenue water ratio amounted to 0.553 and 0.771. The correlation coefficients of the leakage management goal estimate for the criteria for leakage ratio were 0.397 and 0.865. Accordingly, we estimated the quantity and priority of four leakage reduction activities for the target leakage ratio and revenue water ratio.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.4
• /
• pp.403-414
• /
• 2022

Many studies have been conducted on asset management of public facilities, as the importance of such management has been increasing. This basic study aims to present strategies for the practical use of public asset management, and seeks to propose efficient management and utilization measures from a cost perspective by comparing and analyzing the importance and impact relationship between cost items for public asset management. In this study, 19 sub-items and the top 4 items were chosen by deriving cost factors based on the previous literature. A survey was conducted, and the results of the survey were analyzed by using the Analytic Hierarchy Process(AHP) and Interpretive Structural Modeling (ISM) methods. The AHP was used to derive the priority between items, and ISM was used to identify major groups and mutual influences. As a result, those items showing both high priority and high importance, such as user cost, dismantling/disposal cost, replacement cost, maintenance/repair cost, etc. are determined as priority items to be considered for public asset management of public facilities. Also, it is necessary to minimize the impact on other items in public asset management by those items which are impacted less by other items but have significant impact on the items such as initial construction costs, conceptual design costs, construction costs, and supervision costs. It is expected that the results and analysis methods presented in this study can be used to provide strategies for asset management of public facilities.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.2
• /
• pp.155-165
• /
• 2016

Pipe Deterioration Prediction (PDP) and Pipe Failure Risk Prediction (PFRP) models were developed in an attempt to predict the deterioration and failure risk in water mains using fuzzy technique and the markov process. These two models were used to determine the priority in repair and replacement, by predicting the deterioration degree, deterioration rate, failure possibility and remaining life in a study sample comprising 32 water mains. From an analysis approach based on conservative risk with a medium policy risk, the remaining life for 30 of the 32 water mains was less than 5 years for 2 mains (7%), 5-10 years for 8 (27%), 10-15 years for 7 (23%), 15-20 years for 5 (17%), 20-25 years for 5 (17%), and 25 years or more for 2 (7%).

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.868-869
• /
• 2011

Domestic Foreign automaker's are focused on the high-efficiency, low emission cars development. On the way, the hybrid car is the first priority. Hybrid electric vehicle battery pack configurations, EV Relay one of the key components of the engine driving, to assist in the drive motor to supply electrical energy to the battery is a device for opening and closing of the output device. EV Relay determine the longevity and the replacement cycle, The EV Relay environmental conditions and duty cycle considering the reliability tests are essential requirements of many automotive companies to respond to RFQ, this test is essential. This paper using Maxwell Software for Prediction of the Ev Relay impulse, the theoretical data to obtain the impulse to develop methods for mechanical testing after to take advantage of it.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.3
• /
• pp.295-303
• /
• 2009

In the present study, a reliability analysis calculating the probability of system failure has been performed using cut set and results of numerical analysis for unsteady flow in pipe. Especially, the probability of system failure has been evaluated regarding the effect of valve closure which is a really important activity in operation of piping system. In spite of small amount of demand, it was found that fast valve closure can generate high probability of system failure. Furthermore, it was confirmed that surge tank can reduce the unsteady effects and probability of system failure in water distribution system. From the results, it was found that the unsteady flow has a significant effect on the probability of system failure Furthermore, it was able to find which pipe or cut set has high probability of system failure. So it could be used to determine which pipe or cut set has a priority of repair and replacement. Therefore, reliability analysis regarding unsteady flow has to be performed for the planning, designing, maintenance, and operation of piping system.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.20-21
• /
• 2008

In the IEEE 802.16 Wireless MAN standard, the best effort service class is ranked on the lowest position in priority so that only scarce resource may be available for it. Also, the best effort service is usually assisted by a MAC scheme based on reservation ALOHA without explicit acknowledgement. However, the standard only specifies the skeleton of the MAC scheme. In this paper, we propose some rules to specify the indefinite part of the MAC scheme as well as to improve the throughput and delay performance of the MAC scheme. As generic rules for demanding and granting resource, we first propose non-gated exhaustive, gated exhaustive, non-gated limited, and gated limited demand rules, and deficient and full grant rules. Secondly, we propose grant regulation rules, identified as replacement and lifetime rules, to avoid excessive grant incurred by not giving acknowledgement. Noting the residual resource is inflated by adopting a grant regulation rule, we finally propose a rule for investing the residual resource to a subscriber station. Simulation results confirm that a combination of proposed rules improves the performance of the MAC scheme.

• Journal of Animal Science and Technology
• /
• v.62 no.2
• /
• pp.111-120
• /
• 2020

The definition of meat analog refers to the replacement of the main ingredient with other than meat. It also called a meat substitute, meat alternatives, fake or mock meat, and imitation meat. The increased importance of meat analog in the current trend is due to the health awareness among consumers in their diet and for a better future environment. The factors that lead to this shift is due to low fat and calorie foods intake, flexitarians, animal disease, natural resources depletion, and to reduce greenhouse gas emission. Currently, available marketed meat analog products are plant-based meat in which the quality (i.e., texture and taste) are similar to the conventional meat. The ingredients used are mainly soy proteins with novel ingredients added, such as mycoprotein and soy leghemoglobin. However, plant-based meat is sold primarily in Western countries. Asian countries also will become a potential market in the near future due to growing interest in this product. With the current advance technology, lab-grown meat with no livestock raising or known as cultured meat will be expected to boost the food market in the future. Also, insect-based products will be promising to be the next protein resource for human food. Nevertheless, other than acceptability, cost-effective, reliable production, and consistent quality towards those products, product safety is the top priority. Therefore, the regulatory frameworks need to be developed alongside.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.79-86
• /
• 2022

Recently, the amount of maintenance is increasing due to the aging of power facilities, but the budget is constrained. Therefore, the importance of asset management that selects replacement priorities based on the failure probability and enhances investment effects is increasing. Because the number of distribution transformers is very large, the proportion of investment cost is very high. Therefore, it is important to select the investment priority by evaluating the reliable remaining life based on the failure probability. This paper evaluates the statistical expected life using the failure data of distribution transformers for the last 11 years and the current operation data. The hazard rate of distribution transformer and MV cable was compared with each other and the adequacy of early failure removal was reviewed and the statistical expected life corresponding to the cumulative failure probability B3% was calculated.