• 한국산업보건학회지
• /
• 제29권3호
• /
• pp.383-393
• /
• 2019

Objectives: The proportion of those working beyond 53 hours a week in 2018 has reached 16.8% of the total number of workers in the Republic of Korea (Statistics Korea, 2018). Although there are many studies that have dealt with the correlation of long working hours and increasing risk of work-related health problems, studies dealing with the factors impacting work-related health problems of workers according to their working hours are few. This study aims to ascertain factors impacting work-related health problems of workers based on their working hours through thorough research on their work environment. Methods: Necessary factors for this study were extracted from 'the 4th Korean Working Conditions Survey to analyze details on normal characteristics and work environments used for the study analysis, work hours, and health problems related to work. Results: The results are as follows: First, men showed a greater probability of exposure to work-related health problems than did women, especially in the 50s age group, which showed the highest potential for health problems from work among age groups. Second, service providers and sales professionals showed a higher probability of work-related health problems. Third, for the work environment, health problems at work related to vibration, noise, chemical and poison exposure, exhaustion, pain, standing position, and repeated motion showed a higher probability if the work hours are long. Conclusions: This study suggests that the minimization of overtime labor would prevent work-related health problems and diseases, improve the well-being of workers, and decrease the negative impact on workers in the subject area.

• Safety and Health at Work
• /
• 제10권1호
• /
• pp.109-113
• /
• 2019

Background: In both developed and developing countries, noise is regarded as the most common occupational hazard in various industries. The present study aimed to examine the effect of sound pressure level (SPL) on serum cortisol concentration in three different times during the night shift. Methods: This case-control study was conducted among 75 workers of an industrial and mining firm in 2017. The participants were assigned to one of the three groups (one control and two case groups), with an equal number of workers (25 participants) in each group. Following the ISO 9612 standard, dosimetry was adopted to evaluate equivalent SPL using a TES-1345 dosimeter. The influence of SPL on serum cortisol concentration was measured during the night shift. The serum cortisol concentration was measured using a radioimmunoassay (RIA) test in the laboratory. Repeated measure analysis of variance and linear mixed models were used with ${\alpha}=0.05$. Results: The results indicated a downward trend in the serum cortisol concentration of the three groups during the night shift. Both SPL and exposure time significantly affected cortisol concentration (p < 0.0001, p < 0.0001). Conversely, age and body mass index had no significant influence on cortisol concentration (p = 0.360, p = 0.62). Conclusion: Based on the obtained results, increasing SPL will lead to enhancement of serum cortisol concentration. Given that cortisol concentration varies while workers are exposed to different SPLs, this hormone can be used as a biomarker to study the effect of noise-induced stress.

• 한국표면공학회지
• /
• 제55권6호
• /
• pp.353-362
• /
• 2022

Recently, transmittance of photomasks for ultra-violet (UV) region is getting more important, as the light source wavelength of an exposure process is shortened due to the demand for technologies about high integration and miniaturization of devices. Meanwhile, such problems can occur as damages or the reduction of yield of photomask as electrostatic damage (ESD) occurs in the weak parts due to the accumulation of static electricity and the electric charge on chromium metal layers which are light shielding layers, caused by the repeated contacts and the peeling off between the photomask and the substrate during the exposure process. Accordingly, there have been studies to improve transmittance and antistatic performance through various functional coatings on the photomask surface. In the present study, we manufactured antireflection films of Nb₂O₅, | SiO₂ structure and antistatic films of ITO designed on 100 × 100 × 3 mmt sodalime glass by DC magnetron sputtering system so that photomask can maintain high transmittance at I-line (365 nm). ITO thin film deposited using In/Sn (10 wt.%) on sodalime glass was optimized to be 10 nm-thick, 3.0 × 103 𝛺/☐ sheet resistance, and about 80% transmittance, which was relatively low transmittance because of the absorption properties of ITO thin film. High average transmittance of 91.45% was obtained from a double side antireflection and antistatic thin films structure of Nb₂O₅ 64 nm | SiO₂ 41 nm | sodalime glass | ITO 10 nm | Nb₂O₅ 64 nm | SiO₂ 41 nm.

• The Journal of Advanced Prosthodontics
• /
• 제14권6호
• /
• pp.335-345
• /
• 2022

PURPOSE. This in vitro study aimed to evaluate the surface characteristics of a full veneer crown fabricated chairside (CS) from a (Y, Nb)-TZP zirconia block in response to conventional zirconia grinding and polishing. MATERIALS AND METHODS. Zirconia crowns (n = 40) were first prepared and divided into two groups of materials: Labside (LS) and CS, after which each specimen went through a five-step grinding and polishing procedure. Following each surface treatment, surface characteristics were analyzed using confocal laser microscopy (CLSM), average surface roughness (Ra) values were processed from the profile data through Gaussian filtering, and X-ray diffraction pattern analysis was performed to evaluate the monoclinic (M) phase content. Then, a representative specimen was selected for field-emission scanning electron microscopy (FE-SEM), followed by a final analysis of the roughness and X-ray diffraction of the specimens using the independent t-test and repeated measures analysis of variance (RM-ANOVA). RESULTS. In every group, polishing significantly reduced the Ra values (P < .001). There was no significant difference in Ra between the polished state CS and LS. Furthermore, CLSM and FE-SEM investigations revealed that even though grain exposure was visible in CS specimens throughout the as-delivered and ground states, the exposure was reduced after polishing. Moreover, while no phase transformation was visible in the LS, phase transformation was visible in CS after every surface treatment, with the M phase content of the CS group showing a significant reduction after polishing (P < .001). CONCLUSION. Within the limits of this study, clinically acceptable level of surface finishing of (Y, Nb)-TZP can be achieved after conventional zirconia polishing sequence.

• Annals of Occupational and Environmental Medicine
• /
• 제35권
• /
• pp.34.1-34.8
• /
• 2023

Background: Hydrogen sulfide is a toxic substance that humans can be exposed to occupationally, and cases of hydrogen sulfide poisoning of workers in industrial sites are commonly reported. However, there have been no cases of poisoning of the public due to an unauthorized discharge of wastewater, so it is important to describe this incident. Case presentation: In a small village in Jeollanam-do, Republic of Korea, accounts of a terrible stench had been reported. A 26-year-old man who lived and worked in a foul-smelling area was taken to the emergency room with a headache, dizziness, nausea, and repeated syncope. A subsequent police and Ministry of Environment investigation determined that the cause of the stench was the unauthorized discharge of 9 tons of wastewater containing hydrogen sulfide through a stormwater pipe while the villagers were sleeping. The patient had no previous medical history or experience of symptoms. Leukocytes and cardiac markers were elevated, an electrocardiogram indicated biatrial enlargement, left ventricular hypertrophy, and corrected QT interval prolongation. Myocardial hypertrophy was detected on a chest computed tomography scan, and hypertrophic cardiomyopathy was confirmed on echocardiography. After hospitalization, cardiac marker concentrations declined, symptoms improved, and the patient was discharged after 7 days of hospitalization. There was no recurrence of symptoms after discharge. Conclusions: We suspect that previously unrecognized heart disease manifested or was aggravated in this patient due to exposure to hydrogen sulfide. Attention should be paid to the possibility of unauthorized discharge of hydrogen sulfide, etc., in occasional local incidents and damage to public health. In the event of such an accident, it is necessary to have government guidelines in place to investigate health impact and follow-up clinical management of exposed residents.

• 핵의학기술
• /
• 제17권2호
• /
• pp.59-66
• /
• 2013

최근 방사선 작업종사자의 외부피폭을 감소시키기 위하여 방사성 의약품 자동 분주장치를 사용하는 병원이 증가하는 추세이다. 방사성 의약품 자동 분주장치는 주사기의 피스톤을 잡아당기는 거리(mm)를 조절하여 방사성 의약품을 자동 분주 하도록 설계되어 있어 장비에 장착한 바이알 내 방사성 의약품의 비방사능이 클 때 소량의 원하는 단위 방사능의 방사성 의약품을 분주하기 어렵다. 따라서 본 연구에서는 방사성 의약품 자동 분주장치의 방사능 차폐능력을 평가하고 장비의 분주 재현성을 극대화하는 최적화된 분주방법을 찾고자 세 가지 실험을 진행하였다. 첫 번째 실험은 자동 분주장치의 사용여부에 따른 방사선 작업종사자의 손과 흉부의 피폭 비교 실험이다. 환자에게 $^{18}F-FDG$ 투여 시 30명은 자동 분주로, 30명은 수동으로 분주하여 투여하고 주사과정에서 방사선 작업종사자가 받는 손과 흉부의 피폭선량을 측정하여 비교하였다. 흉부 피폭선량은 독립표본 t-검정 결과, 분주방법에 따라 유의한 차이가 있었고 손의 피폭선량은 자동 분주 시 오른손 검지에서 11.5배 왼손 검지에서 4.8배 낮게 측정되었다. 두 번째 실험은 자동 분주장치의 분주 용량 재현성 평가이다. 생리식염수가 담긴 바이알을 장비에 장착하고 분주하고자 하는 용량을 1부터 15 mm까지 1 mm씩 증가시키면서 5회씩 분주하였을 때 주사기의 무게를 뺀 분주된 생리식염수만의 무게를 마이크로 저울로 측정하여 표준편차와 변동계수를 비교하였다. 그 결과, 표준편차는 분주하고자 하는 용량의 크기가 커짐에 따라 불규칙하게 나타났지만 변동계수는 감소하는 추세를 나타냈다. 또한 작은 크기의 주사기를 사용하였을 때 더 낮은 표준편차와 변동계수를 나타냈다. 세 번째 실험은 자동 분주장치의 분주 방사능 재현성 평가이다. 장비에 장착된 바이알 내 $^{18}F-FDG$의 비방사능이 다를 때 70 kg 환자를 기준으로 kg당 5.17 MBq (0.14 mCi)인 362.6 MBq (9.8 mCi)${\pm}10%$를 분주 후 동일 용량에서 4회 더 분주 하여 dose calibrator에서 방사능을 측정하고 그 표준편차와 변동계수를 비교 분석하였다. 그 결과, 장비에 장착된 바이알 내 $^{18}F-FDG$의 비방사능이 증가할수록 표준편차와 변동계수 모 두 증가하는 추세를 보였으며 작은 크기의 주사기를 사용할 때 더 낮은 편차를 보였다. 또한 바이알 내 $^{18}F-FDG$의 비방사능이 2 mL 주사기를 사용할 때에는 약 1,020 MBq/mL (27.6 mCi/mL) 이하, 5 mL 주사기를 사용할 때에는 약 915 MBq/mL (24.7 mCi/mL) 이하일 때 변동계수를 10% 미만으로 유지시키며 더욱 유용하게 사용할 수 있음을 확인하였다.

• 한국운동역학회지
• /
• 제26권4호
• /
• pp.343-351
• /
• 2016

Objective: The purpose of this study was to help improve game performance and provide preliminary data to enhance the efficiency of the kick and stability of the support foot by comparing the kinematic characteristics of the repeated side kick (geodeupyeopchagi) in poomsaeKoryo between expert and non-expert groups. Method: The subjects were divided into 2 groups according to proficiency in Taekwondo, an expert group and a non-expert group (n = 7 in each group), to observe the repeated side-kick technique. Four video cameras were set at a speed of 60 frames/sec and exposure time of 1/500 sec to measure the kinematic factors of the 2 groups. The Kwon3D XPprogramas used to collect and analyze three-dimensional spatial coordinates. Ground reaction force data were obtained through a force plate with a 1.200-Hz frequency. An independent samplesttest was performed, and statistical significance was defined as .05. The SPSS 18.0 software was used to calculate the mean and standard deviation of the kinematic factors and to identify the difference between the experts and non-experts. Results: The angular displacement of the hip joint in both the expert and non-expert groups showed statistical significance on E1 and E4 of the left support foot and E5 of the right foot (p<.05). The angle displacement of the knee joint in both groups showed statistical significance on E4 of the left support foot, and E1 and E2 of the right foot (p<.05). The angular velocity of the lower leg in both groups showed no statistical significance on the left support foot but showed statistical significance on E2 and E6 of the right foot (p<.05). The angular velocity of the foot in both groups showed no statistical significance on the left support foot but showed statistical significance on E2 of the right foot (p<.05). The vertical ground reaction force in both groups showed statistical significance on E2 (p<.05). The center of pressure in all directions in both groups showed statistical significance (p<.5). Conclusion: While performing the repeated side kick (geodeupyeopchagi), the experts maintainedconsistency and stability of the angle of the support leg while the kick foot moved high and fast. On the other hand, the angle of the support foot of non-experts appeared inconsistent, and the kick foot was raised, relying on the support leg, resulting in unstable and inaccurate movement.

• Toxicological Research
• /
• 제19권3호
• /
• pp.181-187
• /
• 2003

Effects of repeated treatment with butylated hydroxyanisole (BHA) on the induction of glutathione S-transferases (GSTs) and teratogenicity of cyclophosphamide were investigated in rats. Pregnant rats were orally treated with BHA (50 mg/kg) for 7 days, from days 6 to 12 of gestation, and intraperitoneally challenged with cyclophosphamide (15 mg/kg) 2 hr after the final treatment. On day 20 of gestation, the maternal and fetal abnormalities were examined. Separately, a part of rats was sacrificed for the assay of hepatic and placental GSTs activities on day 12 of gestation following 7-day treatment with BHA. Cyclophosphamide, administered on day 12 of gestation, induced 43.2% of fetal death and resorption, and 100% of malformations in live fetuses, in contrast to low fetal resorption (8.7%) and malformations (8%) in control group. The malformations include cranial defect and exencephaly (100%), micrognathia and tongue extrusion (100%), limb defects (40%), renal pelvic dilatation (39%), and cleft palate (15%). Interestingly, BHA induced GSTs activities by 62% and 46% over the control in liver and placenta, respectively, and remarkably reduced the fetal resorption (13.9%) and malformations, resulting in 62% of cranial defect and exencephaly, 68% of micrognathia and tongue extrusion, 29% of limb defects, and 14% of renal pelvic dilatation. Taken together, it is suggested that a long-term pretreatment with BHA could substantially prevent fetuses from abortion and malformations following intrauterine exposure to teratogens including cyclophosphamide by inducing phase II antioxidant enzymes such as GSTs.

• 해양환경안전학회지
• /
• 제19권3호
• /
• pp.241-247
• /
• 2013

Yellow clay dispersion has been applied to minimize fisheries impact by the red tide Cochlodinium polykrikoides blooms in Korean coasts since 1995. The present preliminary study documents the effect of yellow clay on Korean rockfish, Sebastes schlegelii, in terms of oxygen consumption rate (OCR). The OCR in the low clay suspension (0.05 and 0.23 %, w/w) showed normal level compared to the control. In contrast, the OCR for each one of three replicates in the high clay suspension (1.16 and 5.58 %, w/w) was not returned to the previous level that clay was not treated, indicating that high clay suspension (${\geq}1.16%$, w/w) might give negative effect on Korean rockfish. Overall, this result suggests that field application of clay to control Harmful Algal Blooms (HABs) may not give impact on Korean rockfish once the clay is dispersed in a low concentration (${\leq}0.23%$). In order to understand the changes of OCR in the repeated exposure to clay, it is required to do further studies on the changes of OCR when the fish is exposed to clay repeatedly after recovery in the normal seawater.

• 한국수산과학회지
• /
• 제42권1호
• /
• pp.34-40
• /
• 2009

In fresh water fish hatcheries and farms, Saprolegniales often cause serious mortality to the fish and their eggs. Malachite green is an effective antifungal agent, but is carcinogenic to fish and humans. Alternative antifungal agents are needed. Presently, we tested various concentrations of MBT-01108 (Opuntia ficus-indica extracts) alone and in combination with bronopol, formalin and sodium chloride (MBT-01108 mixture) on in vitro mycelial growth and in vivo remediation of adult eel, Anguilla japonica, infected with Saprolegnia sp. and fertilized eggs of chum salmon, Oncorhynchus keta, to evaluate the compounds' antifungal efficacy on eyed-egg and hatching rates. MBT-Oll08 mixtures incorporating bronopol and formalin at respective concentrations of 50 and 30 parts per million (ppm), and 100 and 20 ppm were most effective in controlling Saprolegnia in vitro and in vivo (P<0.05). Repeated daily exposures to 50 ppm and 100 ppm MBT-01108 were more effective than exposure every 2-3 days post-fertilization for the inhibition of Saprolegnia infection of rainbow trout, Oncorhynchus mykiss eggs as compared with control (0 ppm).