• Journal of Korean Society for Quality Management
• /
• v.28 no.3
• /
• pp.11-17
• /
• 2000

This paper presents a model for determining the optimal number of general repairs and supplementary input cost limit rate in addition to minimal repair cost rate to implement preventive maintenance. The basic concept parallels the periodic replacement model with minimal repair at failure introduced by Barlow and Hunter(1960) and Park(1979), only difference being the replacement signalled by the number of previous general repairs performed on the system. A general repair brings the state of the system to a certain better state than before repaired. Numerical examples are provided.

• Journal of Applied Reliability
• /
• v.12 no.2
• /
• pp.57-66
• /
• 2012

In this paper, we consider the periodic preventive maintenance model for a repairable system following the expiration of replacement-repair warranty. Under this preventive maintenance model, we derive the expressions for the expected cycle length, the expected total cost and the expected cost rate per unit time. Also, we determine the optimal preventive maintenance period and the optimal preventive maintenance number by minimizing the expected cost rate per unit time. Finally, the optimal periodic preventive maintenance policy is given for Weibull distribution case.

• Communications for Statistical Applications and Methods
• /
• v.18 no.6
• /
• pp.697-705
• /
• 2011

This paper proposes an optimal replacement policy following the expiration of a free renewing replacement-non-renewing minimal repair warranty. To do so, the free renewing replacement-non-renewing minimal repair warranty is defined and then the maintenance model following the expiration of free renewing replacement-non-renewing minimal repair warranty from the user's point of view is studied. As the criteria to determine the optimality of the maintenance policy, we consider the expected cost rate per unit time from the user's perspective. We derive the expressions for the expected cycle length and the expected total cost to obtain the expected cost rate per unit time. Finally, the numerical examples are presented for illustrative purposes.

• International Journal of Reliability and Applications
• /
• v.11 no.2
• /
• pp.107-122
• /
• 2010

This paper deals with the reliability analysis of a complex system, which consists of two subsystems A and B connected in series. Subsystem A has only one unit and B has two units $B_1$ and $B_2$. Marked process has been applied to model the complex system. Present reliability model incorporated two repairmen: supervisor and novice to repair the failed units. Supervisor is always there and the novice remains in vacation and is called for repair as per demand. The repair rates for supervisor and novice follow general and exponential distributions respectively and the failure time for both the subsystems follows exponential distribution. The model is analyzed under "Head of line repair discipline". By employing supplementary variable technique, Laplace transformation and Gumbel-Hougaard family of copula various transition state probabilities, reliability, availability and cost analysis have been obtained along with the steady state behaviour of the system. At the end some special cases of the system have been taken.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.139-142
• /
• 2003

As composite materials are gaining wide acceptance in aircraft structure, repair of damaged composite is becoming an important issue. The issues in composite repair include high cost, material interchangeability, water ingression, and structural integrity. To address these problems, researchers have studied on the composite repair in various aspects. In this paper, an Internet-based advisory service (called Repair Advisory Service, RAS) for composite repair is proposed to increase efficiency for repair process. In the RAS system the web browser is used as its user interface, which provides easy access to the service. The RAS server provides web-based tools for failure prediction, Structural Repair Manual (SRM), automated prepreg cutting process, material properties, inventory and knowledge base. The computer codes implemented for repair design estimate the tensile failure and shear failure of repaired structures. The prediction of failure is based on the maximum strain criterion for tensile failure while elastic-perfect plastic shear failure model is applied for interfacial failure. The OEM's SRM is provided in the PDF format for viewing and searching by web browsers instead of looking up paper version SRM. The knowledge base in this site offers a room to share and distribute ideas, memos, publications, or suggestions from the repair engineers. The fabrication tool of RAS reads repair geometry from engineers then generates a CNC toolpath to cut prepreg patches. The RAS service is open to public and available at http://nano.gsnu.ac.kr/. Broad feedback from field technicians and engineers is welcome to improve the usefulness of RAS.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.5
• /
• pp.459-467
• /
• 2011

The work of constructing apartment housing involves various fields of industry that are linked to each other, and is based on a design document prepared by multiple technicians and architects. Consequently, design errors, material flaws or faulty construction works can cause defects, which sometimes overlap with each other. Construction companies should repair any defects found in a completed building within a specified period of time, and to do this, should establish a business plan by efficiently predicting the cost of defect repair. As it is very difficult for companies to accurately predict the occurrence of defects, historical performance data is used as a base. For domestic apartment housing units, data on the cost of defect repair is insufficient, so there are hardly any methods that can be used to make precise predictions. Therefore, the intent of this study is to develop a model that can predict the cost of defect repair by supply type and area, based on historical performance data with ten years worth of post-completion.

• Restorative Dentistry and Endodontics
• /
• v.46 no.1
• /
• pp.2.1-2.8
• /
• 2021

Objectives: New premixed bioceramic root repair materials require moisture for setting. Using micro-computed tomography (micro-CT), this study evaluated the filling ability and volumetric changes of calcium silicate-based repair materials (mineral trioxide aggregate repair high-plasticity [MTA HP] and Bio-C Repair, Angelus), in comparison with a zinc oxide and eugenol-based material (intermediate restorative material [IRM]; Dentsply DeTrey). Materials and Methods: Gypsum models with cavities 3 mm deep and 1 mm in diameter were manufactured and scanned using micro-CT (SkyScan 1272. Bruker). The cavities were filled with the cements and scanned again to evaluate their filling capacity. Another scan was performed after immersing the samples in distilled water for 7 days to assess the volumetric changes of the cements. The statistical significance of differences in the data was evaluated using analysis of variance and the Tukey test with a 5% significance level. Results: Bio-C Repair had a greater filling ability than MTA HP (p < 0.05). IRM was similar to Bio-C and MTA HP (p > 0.05). MTA HP presented the largest volumetric change (p < 0.05), showing more volume loss than Bio-C and IRM, which were similar (p > 0.05). Conclusions: Bio-C Repair is a new endodontic material with excellent filling capacity and low volumetric change. The gypsum model proposed for evaluating filling ability and volumetric changes by micro-CT had appropriate and reproducible results. This model may enhance the physicochemical evaluation of premixed bioceramic materials, which need moisture for setting.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.3
• /
• pp.69-77
• /
• 2021

Although accident data from the National Police Agency and insurance companies do not know the vehicle safety, the damage level information can be obtained from the data managed by the bus credit association or the bus company itself. So the accident severity was analyzed based on the side impact accidents using accident repair cost. K-means clustering analysis separated the cost of accident repair into 'minor', 'moderate', 'severe', and 'very severe'. In addition, the side impact accident severity was analyzed by using an ordered logit model. As a result, it is appeared that the longer the repair period, the greater the impact on the severity of the side impact accident. Also, it is appeared that the higher the number of collision points, the greater the impact on the severity of the side impact accident. In addition, oblique collisions of the angle of impact were derived to affect the severity of the accident less than right angle collisions. Finally, the absence of opponent vehicle and large commercial vehicles involved accidents were shown to have less impact on the side impact accident severity than passenger cars.

• Journal of the Korean Statistical Society
• /
• v.30 no.1
• /
• pp.89-98
• /
• 2001

Brown and Proschan(1983) introduced a model for imperfect repair. At each failure of a device, with probability p, it is repaired completely or replaced with a new device(perfect repair), and with probability 1-p, it is returned to the functioning state, but it is only recovered to its condition just prior to failure(imperfect repair or minimal repair). In this paper, we limit the number of consecutive minimal repairs by n. We find some useful properties about $\mu$$_{k}$, the expected time between the k-th and the (k+1)-st repair under he assumption that only minimal repairs are performed. Then, we assign cost to each repair and find the value of n which minimized the long-run average cost for a fixed p under the condition that the life distribution F os the device is DMRL.L.

• Journal of the military operations research society of Korea
• /
• v.15 no.1
• /
• pp.54-62
• /
• 1989

This paper presents a corrective maintenance model to determine either type of maintenance actions upon failure of the system. Types of maintenance actions considered are minimal repair and replacement. Minimal repair cost is assumed to be random, whereas replacement cost is fixed. A policy, B(t), which determines the type of maintenance action based on the estimated minimal repair cost when the system fails at time t is adopted. To obtain an optimal policy, an expected maintenance cost per unit time is derived and is minimized with respect to B(t).