• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.8
• /
• pp.76-85
• /
• 2003

In this paper, a technical method for removing the solder from PCBs has been proposed to simplify the pulverizing process and to get higher quality of materials for recycling of the electronic parts in the Printed Circuit Boards (PCBs). There are several techniques to remove the solder from PCB, such as physical and chemical method, vibration, suction and blowing and so on. Among them, the suction technique turned out the best method by investigation. In the suction method, there are three variables for removing the solder. They are a temperature of the thermal wire, a velocity of moving PCB and a gap between PCB and thermal wire. To find the optimal variables for the system, an experiment has been conducted by a trial and error method. The optimal variables were found $220^{\circ}C$ of temperature, 11.58mm/s of velocity, 10mm of gap (A gap between suction hole and bottom of PCBs is 5mm). The result of the experiment shows that 50% of the solder were removed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3_1spc
• /
• pp.531-536
• /
• 2013

An automatic wax-ring manufacturing system for silk coating was developed, which consisted of a container, pallet with a cooling part, injection port, and removing device. The removing device is a system to load, lift, and cut the wax-ring, which is widelyused for various silk-coating industrial purposes. A novel removing device equipped with a water cooling circulation system is proposed in this paper. It has the benefit of easy control, as well as the convenience of loading and unloading without the use of other equipment. Three-dimensional modeling techniques were adopted to develop integrated functions for the automatic wax-ring manufacturing system, which made it possible to confirm the smooth integration/interface of each part and the system's interrelations with other manufacturing systems.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.34 no.3
• /
• pp.13-26
• /
• 2021

Objectives : This study was planned to help clinical treatment by examining the efficacy and frequency of use of medicines with removing nebula and improving vision action, centering on historical literature. Methods : Chinese literature centered on CNKI published after 2000 and ophthalmic books of the Beijing University of Chinese Medicine Library, regardless of the publication period. Domestic literature was searched using NDSL and OASIS, and literature published after 2000 was referenced. Results : According to traditional medical classics, as medicine with removing nebula and improving vision action, medicine with dispelling wind and clearing heat action accounted for the majority. However, it is desirable to use these medicine in the early stages of the disease. Conclusions : 1. Among the external contacts that induce corneal opacity, the wind-heat pattern was the most common. Among the visceral manifestation patterns that induce corneal opacity, liver or spleen was the most common. Cold-tempered medicine which is dispelling wind, clearing heat and bottling up the liver were most commonly used as therapeutic medicine. 2. As removing nebula and improving vision medicine, Cassiae Semen, Chrysanthmi Flos, Eriocauli Flos, and Buddlejae Flos have been widely used. 3. It has been investigated that removing nebula and improving vision medicine can be effectively used in the early stages of various diseases that cause corneal opacity.

• Herbal Formula Science
• /
• v.12 no.2
• /
• pp.47-55
• /
• 2004

Wang Cheong-Im(1768-1831) in the Ching dynasty conducted the therapy of blood statis syndrome using the methods for promoting blood circulation and removing blood statis in accordance with the description in the book Uirimgaechak(醫林改錯). Thus, this study examined his methods for promoting blood circulation and removing blood statis, therapy of blood statis syndrome and mechanism of function. Since the blood statis symptoms varied on the parts where the blood statis were occurred, the therapy for promoting blood circulation and removing blood statis applied different treatments and drugs depending on the symptoms. The therapy also valued much of qi and blood. Qi is important to the human body so that the therapy replenished qi and simultaneously promoted the blood circulation as mainly focusing on the regulation of the qi flow. Moreover, the therapy adjusted the level of removing blood circulation and rate of replenishing qi. The degree of prescription and drug was differentiated in treating a variety of blood statis because of the difference in the seriousness and characteristics of blood circulation, amount and application of drug and combination of drugs. The therapy was careful about the regulation of qi for the replenishment of qi and the nurishment of blood for the promotion of blood circulation. If the blood circulation was blocked, the blood statis was formed. Accordingly, the phlegm and the blood statis were closely related. Then, the phlegm and blood statis were simultaneously treated. The therapy divided the properties of blood statis into the stagnant excess syndrome, the stagnant deficiency syndrome, the stagnant cold syndrome and the stagnant heat syndrome and treated the patients suitable for each symptom. The function of mechanism in the treatment using the methods for promoting blood circulation and removing blood statis was divided into the stagnation of blood and interruption in blood circulation. The therapy laid stress on promoting blood circulation and removing blood circulation. With such emphasis, the therapy facilitated the circulation in the bloood vessel, prevented the coagulation of blood, removed the blood statis and promoted the metabolism. Then, the physiological function and pathological change internal organs were improved. Furthermore, the therapy strengtened the heart and promoted the blood circulation by improving the systemic blood circulation. Moreover, the therapy facilitated the micro-circulation by adjusting the balance of body.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.248-257
• /
• 2019

On this study, we have observed the change of the gel nail morphology as the time elapse and measured the surface roughness/volume, moisture content/purcutaneous moisture vaporizing amount of the nail surface before gel nail treatment and after gel nail removing of the 100%acetone remover, 5%acetone remover and 0%acetone remover and the avocado non acetone remover for the comparison of the effect on the nail surface and the degree of the removing of the gel nail of the removers as the acetone contents. The removing ability were the order of 100%acetone remover, avocado non acetone remover, 5%acetone remover and the 0%acetone remover. There were no statistical significance difference in the nail surface roughness comparision before and after gel nail removing in 5%acetone, 0%acetone and avocado non acetone, and there was no statistical significance difference in the nail surface volume comparision before and after gel nail removing in 0%acetone. We measured the moisture content of the nail surface and the purcutaneous moisture vaporizing amount before gel nail treatment and after gel nail removing, resulted that, the decrease of the moisture content of the nail surface after removing the gel nail is the minimun and the increase of the purcutaneous moisture vaporizing amount of the nail surface after removing the gel nail is the minimun at the case of 0%acetone. In conclusion, 5%acetone remover and 0%acetone remover is possible to use as the gel nail remover and they had revealed that there was the least harmful effect on the nail. We hope that this study is utilized to the development of the non acetone remover and the basic research of the nail beauty industry.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.591-592
• /
• 2009

• Air Cleaning Technology
• /
• v.11 no.2 s.41
• /
• pp.50-58
• /
• 1998

The objective of this study was to evaluate air-cleaner as to its effectiveness in removing to-bacco and incense smoke particulates within a clean chamber, which was installed with 6HEPA filter units. The measurement elements included the concentrations o

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.4
• /
• pp.421-431
• /
• 2006

Statement of problem : Accurate impression is essential to success of implant prostheses. But there have been few studies about the accuracy of fixture-level impression technique in internal connection implant system. Purpose: This study evaluated the accuracy of splinted fixture-level impression technique using clinical methods and the effect of internal hex on fit of superstructure in internal connection implant system (Astra Tech). Material and method : Two metal master frameworks made from two abutments (Cast-to Abutment ST) each for parallel and divergent conditions and a corresponding. passively fitting, dental stone master cast with four future replicas (Fixture Replica ST) were fabricated. Ten dental stone casts were made with vinyl polysiloxane impressions from the master cast by acrylic resin splinted fixture-level impression technique. To evaluate the accuracy of impression technique, the fit of master frameworks for test models was evaluated using screw resistance test (SRT) and one-screw test. The results of SRT were recorded as SRT values from grade 1 to grade 5 by 1/4 turn. And to evaluate the effect of hex on fit of superstructure, the same tests were performed after removing hexes of master frameworks. Results: 1. There was only one case (2.5%) showing SRT value of test model below ade 2 in total before and after removing hexes of master frameworks. And, by removing hexes. SRT values decreased in only one test model (5%) and did not change in 17 test models (85%). 2. SRT values of the 1$^{st}$ screws were grade 2 in 80% of cases before, and grade 1 in 80% of cases after removing hexes. And, by removing hexes, SRT values decreased in 72.5% of cases. 3. SRT values of the 2$^{nd}$ screws were grade 3 in 85% of cases before, and grade 3 in 95% of cases after removing hexes. And, by removing hexes, SRT values did not change in 85% of cases. 4. There were only 2 cases regarded as acceptable fit by one-screw test, and SRT values of 2$^{nd}$ screws of both cases were grade 2. Conclusion. Within the limitations of this study, future-level impression of internal connection implant system is considered to obtain inaccurate working cast, even using acrylic resin splinted impression technique. And, it is considered to be unable improve the fit to remove the hexes of implant restoration.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.6
• /
• pp.325-328
• /
• 2013

Phosphate has been removed in waste water by chemically synthesized graphene oxide. Removing efficiency of phosphate was investigated using phosphate dispersion aqueous solution, and 70 % of phosphate was removed in phosphate dispersion solution by chemically synthesized graphene oxide solution. Removing efficiency of phosphate was increased from 70 % to 80 % with assistant of iron nano-particle in chemically synthesized graphene oxide solution. Phosphate removing capacity was up to 89.37 mg/g at initial phosphate concentration of 100 mg/l and temperature of 303 K. The Freundlich was applied to describe the equilibrium isotherms and the isotherm constants were determined.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.4
• /
• pp.111-118
• /
• 2008

Riparian buffer zone prevents sediment entry into drainage channels or as a protection from runoff and wind erosion. However, Studies about its removing effect according to Riparian buffer zone are shorted now. In this study, using the SWAT model, Byongseong watershed is built on the Arcview GIS. Using the function of the filter strip in SWAT model, it is also examined about the variation of sediment yield. As a simulation result, the case of constructing riparian buffer zones at subbasins near the outlet shows generally high efficiency on removing sediment yield. In addition, according to the scenario analysis of changing riparian buffer zone width, it is thought that 5-10m riparian buffer zone width is the highest efficiency on removing sediment yields generated from Byeongseong watershed.