• Title/Summary/Keyword: remove and management

Search Result 475, Processing Time 0.03 seconds

Variation of Pesticide Residues in Strawberries by Washing and Boiling Processes (딸기의 세척 및 가공 과정에 따른 농약 잔류량 변화)

  • Kwak, Se-Yeon;Lee, Sang-Hyeob;Jeong, Hye-Rin;Nam, Ae-Ji;Sarker, Aniruddha;Kim, Hyo-Young;Lim, Chae-Uk;Cho, Hyun-Jeong;Kim, Jang-Eok
    • Korean Journal of Environmental Agriculture
    • /
    • v.38 no.4
    • /
    • pp.281-290
    • /
    • 2019
  • BACKGROUND: As the demand for strawberries increases, people are paying attention to food safety in strawberry, especially pesticide residues. To remove the pesticides from strawberry, various washing and processing technique in households are additionally required. METHODS AND RESULTS: Strawberries were washed with water, detergent, alcohol, and ultrasonication and processed to strawberry jam. The mean reduction efficiency according to the washing solvent and method was found to be higher in the order of detergent (42.5%) > alcohol (41.7%) > water (41.3%) > ultrasoniation with alcohol (40.2%) > ultrasoniation with water (38.6%) > ultrasoniation with detergent (36.9%), but there was no significant difference among the treatments. The residue levels of pesticides during processing to jam decreased by 11.9-94.4% for etoxazole, fluopyram, procymidone, spiromesifen, and prochloraz, while the other pesticides were concentrated by boiling, or rather increased by 11.8-40.2%. However, when the residue levels were converted to residual amounts in consideration of the change in weight after processing, the residual amounts of the tested pesticides were reduced by 59.8-98.4% during processing. The processing factor (PF) were different for each pesticide, but PFs were < 1 for all washing solvents and methods, and 0.06-1.40 when processed into jam. CONCLUSION: To ensure the consumption of pesticide-free strawberry, the most efficient washing method is to immerse the strawberry in fresh water for few minutes, followed by rinsing them under running water.

A Study on Removal of Organism and Nitrogen, Phosphorus in Wastewater Treatment Process Using Nitrifier Activated Reactor (질산화균 활성화조를 이용한 하수처리 공정에서의 유기물 및 질소, 인 제거에 관한 연구)

  • Dong, Young-tak;Seo, Dong-whan;Bae, Yu-jin;Park, Ju-seok
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.21 no.6
    • /
    • pp.727-735
    • /
    • 2007
  • The use of water by cities is increasing owing to industrialization, the concentration of population, and the enhancement of the standard of living. Accordingly, the amount of waste water is also increasing, and the degree of pollution of the water system is rising. In order to solve this problem, it is necessary to remove organisms and suspended particles as well as the products of eutrophication such as nitrates and phosphates. This study developed a high-end treatment engineering solution with maximum efficiency and lower costs by researching and developing a advanced treatment engineering solution with the use of Biosorption. As a result, the study conducted a test with a $50m^3/day$ Pilot Scale Plant by developing treatment engineering so that only the secondary treatment satisfies the standard of water quality and which provided optimal treatment efficiency along with convenient maintenance and management. The removal of organisms, which has to be pursued first for realizing nitrification during the test period, was made in such a way that there would be no oxidation by microorganisms in the reactor while preparing oxygen as an inhibitor for the growth of microorganism in the course of moving toward the primary settling pond. The study introduced microorganisms in the endogeneous respiration stage to perform adhesion, absorption, and filtering by bringing them into contact with the inflowing water with the use of a sludge returning from the secondary settling pond. Also a test was conducted to determine how effective the microorganisms are as an inner source of carbon. The HRT(Hydraulic Retention Time) in the nitrification tank (aerobic tank) could be reduced to two hours or below, and the stable treatment efficiency of the process using the organisms absorbed in the NAR reactor as a source of carbon could be proven. Also, given that the anaerobic condition of the pre-treatment tank becomes basic in the area of phosphate discharge, it was found that there was excellent efficiency for the removal of phosphate when the pre-treatment tank induced the discharge of phosphate and the polishing reactor induced the uptake of phosphate. The removal efficiency was shown to be about 94.4% for $BOD_5$. 90.7% for $COD_{Cr}$ 84.3% for $COD_{Mn}$, 96.0% for SS, 77.3% for TN, and 96.0% for TP.

Effect of Defoliation Interval on Regrowth and Morphological Characters in White Clover (예취주기가 White Clover의 재생 및 형태적 특성에 미치는 영향)

  • 강진호
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.39 no.3
    • /
    • pp.245-255
    • /
    • 1994
  • Weak persistence of white clover (Trifolium repens L.) under continuous grazing management has been limited its availability in the mixture with grasses. The experiment was carried out to determine the effect of defoliation interval on the regrowth and morphological characters of the clover cultivars. Individual plants of Regal (large leaf), Grasslands Huia (medium-small leaf) and Aberystwyth S184 (small leaf) were grown in 15cm plastic pot containing a 1: 2: 1 soil:sand:Promix mixture for 55 days, and then clipped to remove all fully expanded leaves every 7, 14 or 28 days. For the analysis of the cultivar response, plants were sampled on the final harvest date(0), and 1, 3, 7, 14 and 28 days after the final harvest date. Harvested dry weight of all cultivars declined as defoliation interval was increased, and that of Regal was the highest compared to the other cultivars. During the regrowing period, increase of total plant dry weight was due to that of leaf and petiole dry weight, and that of Osceola was greater than the others. Although total leaf area and mean single leaf area were increased during the regrowing period, they were reduced with increased defoliation interval and those of Osceola were the greatest until 14-days regrowth. S184 possessed the most number of leaves and Osceola did the longest petiole since 14-days regrowth although the more defoliation, the less nunber of leaves per plant and the shorter petiole. Stolon length and growing tips of all cultivars increased steeply during regrowth, while they were decreased with increased defoliation interval and those of S184 were the highest. More frequent defoliation had detrimental effects on regrowth of white clover, although larger leaf type was productive but less persistent in a mixture with grasses than smaller leaf type.

  • PDF

Primary Pericardial Fibrosarcoma Presenting as Cardiac Tamponade - A case report - (심낭압전으로 발견된 원발성 심낭 섬유육종 - 1예 보고 -)

  • Lim, Ju-Yong;Sung, Kyu-Wan;Kang, Gil-Hyun;Yoo, Dong-Gon;Kim, Chong-Wook;Park, Chong-Bin
    • Journal of Chest Surgery
    • /
    • v.40 no.8
    • /
    • pp.574-577
    • /
    • 2007
  • Primary malignant neoplasm of the pericardium is very rare, Neoplastic involvement of the pericardium may result in rapidly developing hemorrhagic effusion. A 30-year-old male who occasionally suffered from chest tightness was referred to our hospital under the diagnosis of unstable angina. He presented with acute chest pain and severe dyspnea that had developed one day previously. The diagnostic investigations such as echocardiography, chest CT and magnetic resonance image suggested cardiac tamponade that was caused by rupture of the pericardial teratoma. An operation to remove the tumor and effusion was performed. The pericardial mass was completely excised, and the result of the frozen biopsy favored malignancy. The final pathologic report was malignant fibrosarcoma of the pericardium and no malignant cells were found on the cytology of the pericardial effusion. The patient had a smooth postoperative course and was referred to another hospital for additional radiation therapy. We report here on this case of cardiac tamponade that was caused by primary pericardial fibrosarcoma, and this required urgent diagnosis and surgical management.

Concept Map Development of 'Eco-friendly Clothing Life and Reform Clothes' Unit in Middle School Technology·Home Economics Textbooks Based on 2009 Revised Curriculum (2009 개정 기술·가정 교과서 '친환경적 의생활과 옷 고쳐입기' 단원의 개념도 개발)

  • Yang, Ji Sun
    • Journal of Korean Home Economics Education Association
    • /
    • v.29 no.3
    • /
    • pp.161-183
    • /
    • 2017
  • The purpose of this study is to develop a concept map in a visual instructional strategy so that meaningful learning can be done by structuring knowledge in the section of eco-friendly clothing life and reform clothes. For this purpose, ten textbooks for the 2009 revised were analyzed, and 10 sub-area were selected to develop the concept map. The development was done by using Cmap Tools V6.02 and the study process has progressed content analysis, concept extraction, and concept map development. The analysis process and results of this study are as follows. First, in the course of setting standards, the analytical standards were set for the 2007 revision and 2009 revision curriculum achievement standards. Second, in the process of content analysis and concept extracting, through the analysis of textbooks, 'clothing selection and purchase', 'clothing care and management' and 'clothing reuse and eco-friendly'. The concept was extracted by subdividing on the basis of general and comprehensive core concepts. Third, the development process of concept map was developed and revised based on the extracted concepts, and the concept map developed was the 'clothing purchase plan', 'points to consider when buying clothing' 'quality', 'handle with care', 'classify laundry', 'remove stain', 'water washing', 'repair clothing', 'reform clothing', 'eco-friendly clothing life'.

A Ship-Wake Joint Detection Using Sentinel-2 Imagery

  • Woojin, Jeon;Donghyun, Jin;Noh-hun, Seong;Daeseong, Jung;Suyoung, Sim;Jongho, Woo;Yugyeong, Byeon;Nayeon, Kim;Kyung-Soo, Han
    • Korean Journal of Remote Sensing
    • /
    • v.39 no.1
    • /
    • pp.77-86
    • /
    • 2023
  • Ship detection is widely used in areas such as maritime security, maritime traffic, fisheries management, illegal fishing, and border control, and ship detection is important for rapid response and damage minimization as ship accident rates increase due to recent increases in international maritime traffic. Currently, according to a number of global and national regulations, ships must be equipped with automatic identification system (AIS), which provide information such as the location and speed of the ship periodically at regular intervals. However, most small vessels (less than 300 tons) are not obligated to install the transponder and may not be transmitted intentionally or accidentally. There is even a case of misuse of the ship'slocation information. Therefore, in this study, ship detection was performed using high-resolution optical satellite images that can periodically remotely detect a wide range and detectsmallships. However, optical images can cause false-alarm due to noise on the surface of the sea, such as waves, or factors indicating ship-like brightness, such as clouds and wakes. So, it is important to remove these factors to improve the accuracy of ship detection. In this study, false alarm wasreduced, and the accuracy ofship detection wasimproved by removing wake.As a ship detection method, ship detection was performed using machine learning-based random forest (RF), and convolutional neural network (CNN) techniquesthat have been widely used in object detection fieldsrecently, and ship detection results by the model were compared and analyzed. In addition, in this study, the results of RF and CNN were combined to improve the phenomenon of ship disconnection and the phenomenon of small detection. The ship detection results of thisstudy are significant in that they improved the limitations of each model while maintaining accuracy. In addition, if satellite images with improved spatial resolution are utilized in the future, it is expected that ship and wake simultaneous detection with higher accuracy will be performed.

Effect of Ultra-Soft and Soft Toothbrushes on the Removal of Plaque and Tooth Abrasion

  • Jeong, Moon-Jin;Cho, Han-A;Kim, Su-Yeon;Kang, Ka-Rim;Lee, Eun-Bin;Lee, Ye-Ji;Choi, Jung-Hyeon;Kil, Ki-Sung;Lee, Myoung-Hwa;Jeong, Soon-Jeong;Lim, Do-Seon
    • Journal of dental hygiene science
    • /
    • v.18 no.3
    • /
    • pp.164-171
    • /
    • 2018
  • To improve the oral health status of Korean people, it is necessary to encourage proper oral hygiene management habits, such as toothbrushing, through appropriate health promotion techniques. Therefore, the purpose of this study was to evaluate the removal of plaque and tooth abrasion using ultra-soft (filament 0.11~0.12 mm) and soft toothbrushes for toothbrushing. The plaque removal was performed using a dentiform and Arti-spray, and the Patient Hygiene Performance (PHP) index was calculated as the sum total score divided by the total number of surfaces. In the abrasivity experiment, according to the number of brushings, a micro Vickers hardness tester was used, and a sample in the range of 280~380 Vickers hardness number was selected. The number of toothbrushing stroke were 1,800 (2 months), 5,400 (6 months), 10,800 (12 months), and 21,600 (24 months). The tooth abrasion was measured using a scanning electron microscope. Statistical analysis was performed using IBM SPSS Statistics 22.0 and a p-value <0.05 was considered significant. According to the results, there was no statistically significant difference in the degree of plaque removal between ultra-soft and soft toothbrushes. The difference in tooth abrasion between before and after toothbrushing was found to be greater with the soft toothbrushes than with the ultra-soft toothbrushes. Therefore, the ultra-soft toothbrush not only lowers tooth damage by reducing tooth abrasion, but also shows a similar ability to remove plaque as soft toothbrushes.

Development of Automated Statistical Analysis Tool using Measurement Data in Cable-Supported Bridges (특수교 계측 데이터 자동 통계 분석 툴 개발)

  • Kim, Jaehwan;Park, Sangki;Jung, Kyu-San;Seo, Dong-Woo
    • Journal of Korean Society of Disaster and Security
    • /
    • v.15 no.3
    • /
    • pp.79-88
    • /
    • 2022
  • Cable-supported bridges, as important large infrastructures, require a long-term and systematic maintenance strategy. In particular, various methods have been proposed to secure safety for the bridges, such as installing various types of sensor on members in the bridges, and setting management thresholds. It is evidently necessary to propose a strategic plan to efficiently manage increasing number of cable-supported bridges and data collected from a number of sensors. This study aims to develop an analysis tool that can automatically remove abnormal signals and calculate statistical results for the purpose of efficiently analyzing a wide range of data collected from a long span bridge measurement system. To develop the tool, basic information such as the types and quantity of sensors installed in long span bridges and signal characteristics of the collected data were analyzed. Thereafter, the Humpel filtering method was used to determine the presence or absence of an abnormality in the signal and then filtered. The statistical results with filtered data were shown. Finally, one cable-stayed bridge and one suspension bridge currently in use were chosen as the target bridges to verify the performance of the developed tool. Signal processing and statistical analysis with the tool were performed. The results are similar to the results reported in the existing work.

A Study on the Removal of Fluorine from Leachate of Reclaimed Mine Waste Dump Site Using Alum Coagulation (알럼 응집을 이용한 광산폐기물 적치장 침출수 내 불소 제거 연구)

  • Sang-Woo Lee;Woo-Chun Lee;Seong Hee Kim;Sang Heon Jeong;Bo Young Lee;Sang-Hwan Lee;Soon-Oh Kim
    • Korean Journal of Mineralogy and Petrology
    • /
    • v.36 no.1
    • /
    • pp.19-32
    • /
    • 2023
  • This study was conducted to remove fluorine (F) (initial concentration of 9.5 mg/L) from leachate of reclaimed mine waste dump site via different methods: (1) co-precipitation using Ca-based materials; (2) adsorption using activated carbon and fly ash; and (3) coagulation and sedimentation using alum. The F removal efficiencies of each case were estimated as 65.6% (Ca co-precipitation), 27.9% (adsorption of activated carbon), 71.5% (adsorption of fly ash), and 96.6% (alum coagulation and sedimentation). In addition, the applicability of the continuous treatment process using alum coagulation was evaluated by lab-scale experiments using simulated mine drainage containing F of lower (6.4 mg/L) and higher (15.7 mg/L) concentrations, and it was confirmed that the treatment of both cases met the domestic standard (below 3 mg/L) for discharged water in clean areas. Furthermore, the results of bench-scale field tests indicated that the water quality standard of discharged water could be satisfied with the proper operation and management of the process.

Remote control system for management of a stall using PDA (PDA를 이용한 축사관리 원격제어 시스템)

  • Kim, Tae-Soo;Chun, Joong-Chang
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2009.10a
    • /
    • pp.1010-1013
    • /
    • 2009
  • The youths of the farming village have moved to the metropolis, thus the most of the manpower which engages to a production remained in the village reaches layer old age and all thing sprouts long the whole and it is one. So to remove the waste of barn rather than to give feed to the livestock is hard that what step all automation of this part is necessary. Consequently we have developed the automation system in order to reduce the massive death of the livestock at the time of intense cold and hot. The system will be able to clean the waste of the barn and confront quickly in the change of temperature which is sudden it came. And we proposed also the system that will be able to watch at real-time and monitor the operational environment from a remote using CCD camera. In this paper, we proposed the remote control system which uses PDA in order to control the automation system of a stall while moving. The proposed system was embodied in order for the control and the monitor while the user is mobile using PDA screens. We also added a protection system in that system. The system sends the case warning and SMS while will have the fire and the intrusion from the outside and prevents a robbery.

  • PDF