• 한국기계가공학회지
• /
• 제21권4호
• /
• pp.46-52
• /
• 2022

In the existing wired communication network, wired communication is frequently interrupted by lightning, which accompanies rain, and remote management cannot be performed when it is actually necessary. In the case of communication interruption, field data stored in the database are lost, and data at an important point in time may go missing; this causes a decrease in the reliability of the stored data. Therefore, in this study, wireless communication using the Internet of Things (IoT) communication network of the 4^th industrial technology is installed in the prototype to reduce wired communication construction costs, prevent resource waste and environmental damage due to communication facility construction, and prepare for communication loss.

• 전기학회논문지
• /
• 제61권2호
• /
• pp.347-353
• /
• 2012

In this paper, authors will develop the quick and precise remote controller of automatic fire detection equipment (P-type one-class receiver) based on information communication technology (IT). The remote controller detects the fire and disaster in the building automatically and quickly and then activates the facilities to extinguish the fire and disaster, monitoring such situation in a real time through wire-wireless communication network. The proposed remote controller is applied a programmable logic device (PLD) micom. of one-chip type which is small size and lightweight and also has highly sensitive-precise reliabilities. The one-chip type PLD micom. analyzes digital signals from sensors, then activates fire extinguishing facilities for alarm and rapid suppression in a case of fire and disaster. The detected data is also transferred to a remote situation room through wire-wireless network of RS232c and bluetooth communication, and then the situation room sends an emergency alarm signal. The automatic fire detection equipment (AFDE) based on IT will minimize the life and wealth loss while prevents fire and disaster.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권6호
• /
• pp.2546-2566
• /
• 2016

This paper investigates an efficient transmission scheme for the remote wireless sensors to receive information which is rarely discussed in the integrated remote wireless sensor and multibeam satellite networks (IWSMSNs). The networks can be employed to exchange sensing information for emergency scenario, ocean scenario, and so on, which are isolated from available terrestrial networks. As the efficient transmission link is important to the IWSMSNs, we propose a hybrid full frequency (HFF) precoding by taking advantage of frequency reuse and multiple-input multiple-output (MIMO) precoding. Considering energy efficiency and sinks fairness are crucial to transmission link, thus the HFF precoding problems are formulated as transmit power minimization (TPM) and max-min fair (MMF) received signal to interference plus noise ratio (SINR) problems, which can be transformed to indefinite quadratic optimization programs. Then this paper presents a semi-definite programming (SDP) algorithm to solve the problems for the IWSMSNs. The promising potential of HFF for the real IWSMSNs is demonstrated through simulations.

• 전기학회논문지P
• /
• 제58권3호
• /
• pp.276-284
• /
• 2009

In this paper, we develop the image transfer remote maintenance monitoring system for hand held device which can compensate defects of human mistake. The human mistakes always happen when the worker communicate information each other to check and maintenance the equipment of the power plant under bad circumstance such as small place and long distance in power plant. A worker couldn't converse with other when in noisy place like Power plant. So, we make some hand device for handy size and able to converse in noisy place. The developed system can have improvement of productivity through increasing plant operation time. And developed system is composed of advanced H/W(hard ware) system and S/W(soft ware)system. The H/W system consist of media server unit, communication equipment with hand held device, portable camera, mike and head set. The advanced s/w system consist of data base system, client pc(personal computer) real time monitoring system which has server GUI(graphic user interface) program, wireless monitoring program and wire ethernet communication program. The client GUI program is composed of total solution program as pc camera program, and phonetic conversation program etc.. We analyzed the required items and investigated applicable part in the image transfer remote maintenance monitoring system with hand held device. Also we investigated linkage of communication protocol for developed prototype, developed software tool of two-way communication and realtime recording skill of voice with image. We confirmed the efficiency by the field test in preventive maintenance of plant power.

• 한국정보통신학회논문지
• /
• 제24권12호
• /
• pp.1654-1661
• /
• 2020

사물인터넷 기술은 통신을 지원하지 않는 장비에 소형 통신 장치를 부착하여 장비의 정보를 원격에서 수집, 제어할 수 있다. 사물인터넷 기술을 지원하기 위해서 저전력, 장거리 통신 기술인 LPWAN이 제안되었고 대표적으로 LoRa가 있다. 네트워크 장비를 포함한 다양한 시스템들은 원격 접속을 통해 장비의 상태를 실시간 모니터링 할 수 있다. 그러나 네트워크 장애가 발생하면 원격 접속 및 상태 모니터링은 별도의 부가 네트워크가 있지 않은 한 불가능하다. 이러한 문제를 극복하기 위해, 본 논문에서는 장비에 쉽게 부착할 수 있고 독립적인 네트워크를 이용해 원격에서 장비를 모니터링 및 제어하는 독립형 원격 장비 관리시스템을 제안한다. 제안한 시스템을 설계 및 구현하여 실용성을 보이겠다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.243-245
• /
• 2005

This paper presents a wired and wireless linked remote control system. Ethernet based network communication is used for long distance management and 2.4GHz RF network is adopted for the local area communication between the main network and the ballast. For the effective remote control and management including dimming using wired and wireless linked digital communication networks, control circuit of the ballast is implemented with fully digital circuit using MCU and EPLD. In this paper, the proper frame structure is proposed for the digital-remote lighting-control system and the detailed system configurations including fully digital controlled ballast for the induction lamp are described.

• 전기학회논문지P
• /
• 제52권3호
• /
• pp.95-99
• /
• 2003

In this paper, the power system automation based on CAN communication protocol is introduced. Along with digitalization of electrical device, the various on-line services such as remote control, remote monitoring, remote parameter setting, fault data recording and remote diagnostic have been realized and become available. Therefore, it is necessary for those electrical devices to have real-time and reliable communication protocols. Author proposes DNPC(Distributed Network Protocol with CAN) which is proper to the power system SCADA (Supervisory Control And Data Acquisition) and DCS (Distributed Control System). The physical and datalink layer of DNPC protocol consists of the CAN2.0B which has the real-time characteristics and powerful error control scheme. As the transport and application layer, DNP3.0 is adopted because of its flexibility and compatible feature. Using the DNPC protocol, the power system automation is realized.

• 한국정보통신학회논문지
• /
• 제24권11호
• /
• pp.1546-1549
• /
• 2020

This paper introduces the development process of mobile home CCTV that enables remote control and object recognition using unused smartphones and Arduino. Clients can control motors connected to Arduino through button, enable bidirectional voice communication between client-server and receive video from the server in real time. The server sends a PUSH notification to the client when its battery is low. When the server recognizes the charger, the client's remote control allows the server to dock to the charger and charge it. It was confirmed that video and voice delivery between client and server works well without any problems, and that object recognition works smoothly.

• 전자공학회논문지CI
• /
• 제47권2호
• /
• pp.48-53
• /
• 2010

RC(Remote Control)기술들은 CE(Consumer Electronics)들에게 사용자의 명령을 전달하고 편리하게 제어할 수 있도록 해주는 기술이다. 그러나 CE 기기의 성능 향상과 새로운 개념의 기기들이 개발됨에 따라 다양한 기기간 통신 필요성과 그러한 기기를 제어하기 위한 진보된 RC 기능에 대한 요구가 증대되고 있다. 그러나 기존의 대표적인 IR 기반의 RC 방식은 거리의 제약과 에너지 소모 등 많은 제약사항을 가지고 있다. 본 논문에서는 이러한 제약사항들을 해결하기 위해, 스마트폰 단말에 RF4CE 표준을 지원하는 R-URC(Smartphone based RF4CE Universal Remote Control Framework) URC 프레임워크를 제안한다. 제안된 URC 시스템은 CE 제어와 관한 RC 표준으로 09년 3월에 발표된 ZigBee RF4CE를 기반으로 설계되었으며, 제안한 시스템의 효율성 검증을 위해 기기들 간의 컨텐츠 공유 및 제어 기능을 실제 LED TV, NotePC, 그리고 스마트폰에 적용한 실험을 수행하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.744-747
• /
• 2000

This paper aims at developing remote control system to control and monitor distribute various devices through internet or information communication network. So far for managing UPS(Uninterruptible Power Supply) serial communication system has been used. This paper proposes managing method of UPS monitoring using SNMP. It consists of SNMP agent network board SNMP manager PC software serial communication software and UPS. The proposed method can be applied to various devices with communication network remotely.