• 한국통신학회논문지
• /
• 제38B권3호
• /
• pp.180-189
• /
• 2013

본 연구의 목적은 농어촌 지역의 정보격차 해소를 위한 초고속정보통신 인프라 구축 확대에 대해 경제성을 분석하여 정부 및 민간 통신사업자에게 정보화사업 확대의 당위성과 추진 전략을 제안하는 데에 있다. 초고속 인터넷 망에 대한 접근성이 결여된 상태에서 도시와 농어촌 지역 간에 정보격차가 발생될 수밖에 없는 상황을 살펴보고, 농어촌 지역의 마을 형태별 FTTH 망 구성을 위해 가입자 댁내 인입 구간인 1.3Km~1.5Km 범위를 대상으로 경제성 분석을 하였다. 통신 인프라 망의 구축을 통하여 창출되는 유무형의 사회적 편익요소의 가치를 고려할 때 중앙정부에서 주도적으로 정보화 사업을 추진할 필요가 있으며, 이를 위해 효과적으로 정보격차를 해소시킬 수 있는 방안을 제시하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2005년도 하계학술대회
• /
• pp.329-332
• /
• 2005

In this paper, we describe implementation of personal media gateway (PMG) for applications over BcN networks. PMG is a TV based set-top terminal, which enables transmission of Full D1 high quality video and audio at the speed of maximum 2Mbps. It supports SIP protocol and QoS for the BcN networks. The hardware of the PMG consists of host module, audio/video codec processing module, DTMF module, and remote control I/O module. H.263 and MPEG4 software are implemented in DSP as codec for hi-directional communication and streaming, respectively. G.711 and Ogg-Vorbis are implemented as audio codec. We examined the quality of video using the Video Quality Test Equpment, which was developed by KT Convergence Lab. The experimental results show the video quality of MOS 4.1 and audio quality of MOS 4.3. We expect that PMG will be prospective business models, and create new customer value.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.455-458
• /
• 2006

The Real Time Kinematic (RTK) technique is the most productive and accurate GPS positioning method today, as it can be determinate position within few centimeters instantly. This method is widely used for applications such as surveying, structure monitoring and machine guidance etc. In order to perform RTK processing for large scale systems (i.e. precise vehicle monitoring with many rovers), many expensive RTK receivers and same number of bidirectional communication units have to be installed to collect observation data communicate with the reference site and monitor its RTK solutions. Moreover, if applications require remote control or apply sensing instruments, we have to install computers at each rover. To limit expense and complexity of system management with a large number of rovers, we have developed server based RTK processing platform to share RTK function for all rovers. The system can be process many GPS stations with a single personal computer. we have also developed a specialized dual frequency GPS receiver unit without on-board RTK processing capability to reduce receiver cost in order to demonstrate the advantage of our server based RTK platform. This paper describes the concept of our server based RTK platform and specialized GPS receiver unit with existing applications in Japan.

• 한국IT서비스학회지
• /
• 제10권1호
• /
• pp.177-190
• /
• 2011

Due to the growth of economy and the advancement of IT, the life expectancy has been prolonged and the interests in health have greatly increased. Recently the request for systems that enable measuring the bio-signals of patients in the non medical organizations, such as home, and transmitting them to medical staffs at remote sites for monitoring them. In this paper, we present an agent-based u-health system for patients or suspects with heart diseases. Our system consists of portable devices for measuring bio-signals and agents that perform data collection, data storage, automatic detection of abnormal status in patients, and HL7-based data exchange in a cooperative way. The main features of the system are : the agent-based architecture facilitates the addition of new service modules as well as the modification of existing ones; an intelligent agent is provided which automatically detects situations in which the bio-signals of patients are abnormal; the medical data standard is supported so that the communication with other systems is very easy. To our survey, there have been few previous systems which support all those features in a seamless way.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1465-1466
• /
• 2006

The monitoring and diagnosing technique for lightning arresters is important to assure the reliability of power supply in GIS-substation. In this paper, we described the implementation of an expert system for GIS arrester facilities. The proposed system consists of a data acquisition module (DAM), a wireless communication module, and a personal computer. The DAM detects system voltages, total leakage currents and its harmonic components, and includes an algorithm to calculate the resistive leakage current by the principle that the magnitudes of resistive leakage current are equal at the same level of the system voltage applied to the arrestor. Also, we designed a surge event detection circuit which can acquire the date, the polarity, and the amplitude of surge events. All the acquired data are transmitted after correction by many algorithms to the remote station through the ZigBee protocol. The expert system is based on the Jave Expert System Shell (JESS) and make more reliable decision by using an exclusive inference process.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.361-364
• /
• 2008

무선 센서 네트워크(Wireless Sensor Network: WSN)의 응용서비스 모델은 센서, 마이크로 컨트롤러, 무선 통신 칩셋을 결합한 센서 하드웨어에 의한 센서 네트워크, 데이터 처리를 위한 미들웨어, 사용자 서비스의 형태로 구성된다, 이러한 WSN응용은 환경모니터링, 공장자동화와 같은 분야에 적용되어 왔고, 주로 사람이 감시하기 힘든 원격 모니터링을 기반으로 하는 응용서비스에 집중되어 왔다. 본 논문에서는 무선 센서 네트워크의 응용모델을 기반으로 유비쿼터스 방재 시스템에 적용하기 위한 구축 고려요소에 대해 서술하고, 그 응용 범위의 적합성을 논한다. 제안하는 모델은 무선 센서 네트워크 하드웨어, 라우팅 기술, 미들웨어 구성요소, 보안정책에 관한 내용이 포함되어 있다.

• 한국항공운항학회지
• /
• 제22권4호
• /
• pp.65-74
• /
• 2014

Unmanned aerial vehicles(UAVs) refer to the aircraft which carries no human pilot and is operated under remote control or in autonomous operational mode. As the UAVs can perform the dull, dangerous and difficult missions, various kinds of UAVs with different sizes and weights have been developed and operated for both civil and military application. As the avionics and communication technology related to the UAVs are matured, the demand for the UAVs is dramatically increased. Therefore, It is important to develope airworthiness process and regulations of the UAVs to minimize related risk to the man and environment. This paper describes related regulations and classification of the small UAVs for different international airworthiness authorities. The analysis of the CS-LURS verses Stanag 4702 and Stanag 4703 can provide guidelines for the generation of the airworthiness certification criteria for the small UAVs in civil sector. This paper conducted kinetic impact energy analysis of the loss of the small UAVs control scenarios and of the very small UAVs under 66 joules. Based on the analysis, the energy impact analysis can be considered before the design certification approval for the small UAVs.

• Journal of Electrical Engineering and Technology
• /
• 제5권1호
• /
• pp.16-20
• /
• 2010

Recently, the smart grid has become a hot issue and interest in related power sources have increased accordingly. The implementation of a smart grid can enable many generation resources to be linked to the power system, including small-scale reactors for the purpose of co-generation. Research on small-scale reactors is being carried out all over the world. Similarly, Korea is also conducting research on multi-purpose regional energy systems using nuclear energy. This paper proposes a real-time data acquisition and analysis system for small-scale reactors, and is known as the REX-10 (Regional Energy rX 10 MVA). This analysis requires real-time simulations for the power system since it needs data communication with a remote REX-10. A RTDS (Real Time Digital Simulator) has been used for the simulation, and a SCADA/HMI system interfaced with the RTDS is proposed for the purpose of monitoring and control of the regional energy system.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.23-30
• /
• 2004

Modern production systems are very complex by request of automation, and failure modes that occur in thisautomatic system are very various and complex. The efficient fault diagnosis for these complex systems is essential for productivity loss prevention and cost saving. Traditional fault diagnostic system which perforns sequential fault diagnosis can cause catastrophic failure during diagnosis when fault propagation is very fast. This paper describes the Real-time Intelligent Multiple Fault Diagnosis System (RIMFDS). RIMFDS assesses current machine condition by using sensor signals. This system deals with multiple fault diagnosis, comprising of two main parts. One is a personal computer for remote signal generation and transmission and the other is a host system for multiple fault diagnosis. The signal generator generates various faulty signals and image information and sends them to the host. The host has various modules and agents for efficient multiple fault diagnosis. A SUN workstation is used as a host for multiple fault modules and agents for efficient multiple fault diagnosis. A SUN workstation is used as a host for multiple fault diagnosis and graphic representation of the results. RIMFDS diagnoses multiple faults with fast fault propagation and complex physical phenomenon. The new system based on multiprocessing diagnoses by using Hierarchical Artificial Neural Network (HANN).

• Journal of information and communication convergence engineering
• /
• 제2권1호
• /
• pp.58-60
• /
• 2004

Sea level variations and sea surface circulations in the Korean seas were observed by Topex/Poseidon altimeter data from 1993 through 1997. In sea level variations, the West and South Sea showed relatively high variations with comparison to the East Sea. Then, the northern and southern area in the West Sea showed the range of 20∼30cm and 18∼24cm, and the northern west of Jeju island and the southern west of Tsushima island in the South Sea showed the range of 15∼20cm and 10∼15cm, respectively. High variations in the West Sea were results to the inflow in sea surface of Yellow Sea Warm Current (YSWC) and bottom topography. Sea level variations in the South Sea were due to two branch currents (Jeju Warm Current and East Korea Warm Current) originated from Kuroshio Current (KC). In sea surface circulations, there existed remarkably three eddies circulations in the East Sea that are mainly connected with North Korea Cold Current (NKCC), East Korea Warm Current (EKWC) and Tushima Warm Current (TWC). Their eddies are caused basically to the influence of currents in sea surface circulations; Cyclone (0.03 cm/see) in the Wonsan bay off shore with NKCC, and anticyclone (0.06 cm/see) in the southwestern area of Ulleung island with EKWC, and cyclone (0.01 cm/see) in the northeastern area of Tushima island with TWC, respectively.