• 한국안전학회지
• /
• 제10권2호
• /
• pp.120-128
• /
• 1995

The fatigue failure of rail is a principal source of derailment accidents. The reduction of fatigue failures can be achieved by Intensive track maintenance and periodic safety assessments for the railway. For the safety assessments, it is required to have more accurate knowledge for fatigue behavior such as the crack initiation, propagation, crack growth rate and the remaining service life in rail. In this paper, the mean stress effects for the fatigue behavior of rail steel are studied. For this study, the fatigue test is conducted and some equations for fatigue evaluation are applied and compared. From the results, we can see that the fatigue crack growth rate is the more increased as the men stress Is the more increased, the mean stress effect is represented well by the combination of stress intensity factor range and maximum stress intensity factor and Crooker and Range's equation represented by ${\Delta}K, K_{max}$ is the best fit for fatigue evaluation and safety assessment of rail.

• 한국치위생학회지
• /
• 제18권6호
• /
• pp.903-910
• /
• 2018

Objectives: The study aimed to identify the oral health factors that affect the nutritional status of the elderly. Methods: The study was conducted over ten months from September 2013 to June 2014, and included senior citizens who were supported by the visiting health service. The rate of saliva release, the number of remaining teeth, and the ability of the elderly to identify nutritional conditions were evaluated. Statistical analyses were performed using the t-test, ANOVA, and multiple linear regression using SAS 9.4 (SAS Institute Inc., Cary, NC, USA.). Results: The study participants had an average irritation saliva secretion rate of $2.26{\pm}1.11mg$ per minute. The higher the rate of saliva secretion, the higher the mini nutritional assessment (MNA) score (p<0.001). The average number of remaining teeth was $8.21{\pm}9.76$. The MNA scores were highest in groups with 11 or more remaining teeth (p=0.001). The factors that affected the nutritional condition of the elderly were their ability to perform activities of daily living, saliva flow rate, and number of remaining teeth. The highest correlation among them was that of the standardized regression coefficient was - 0.386 by activity daily living, followed by a 0.170 saliva secretion rate and 0.118 remaining teeth in daily life performance. Conclusions: Activities of daily living and rate of saliva secretion showed the highest correlations to nutritional status of the elderly.

• Computers and Concrete
• /
• 제6권4호
• /
• pp.281-303
• /
• 2009

The lack of safety of bridge deck structures causes frequent repair and strengthening of such structures. The repair induces great loss of economy, not only due to direct cost by repair, but also due to stopping the public use of such structures during repair. The major reason for this frequent repair is mainly due to the lack of realistic and accurate assessment system for the bridge decks. The purpose of the present research was to develop a realistic expert system, called Bridge Slab-Expert which can evaluate reasonably the condition as well as the service life of concrete bridge decks, based on the deterioration models that are derived from both the structural and environmental effects. The diagnosis assessment of deck slabs due to structural and environmental effects are developed based on the cracking in concrete, surface distress and structural distress. Fuzzy logic is utilized to handle uncertainties and imprecision involved. Finally, Bridge Slab-Expert is developed for prediction of safety and remaining service life based on the chloride ions penetration and fick's second law. Proposed expert system is based on user-friendly GUI environment. The developed expert system will allow the correct diagnosis of concrete decks, realistic prediction of service life, the determination of confidence level, the description of condition and the proposed action for repair.

• 한국재료학회지
• /
• 제25권10호
• /
• pp.516-522
• /
• 2015

Aging aircraft structures are inevitably exposed to environment for a long time facing many potential problems, including corrosion and wide spread fatigue damage, which in turn cause the degradation of flight safety. In this study, the environmental surface damages on aging aircraft structures induced during service were quantitatively analyzed. Additionally, S-N fatigue tests were performed with center hole specimens extracted from aging aircraft structures. From the results of quantitative analyses of the surface damages and fatigue tests, it is concluded that corrosion pits initiated during service reduce the fatigue life significantly. Finally, using the fracture mechanics and the EIFS (equivalent initial flaw size) concepts, the remaining fatigue life was predicted based on actual fatigue test results.

• 보건의료산업학회지
• /
• 제5권2호
• /
• pp.77-89
• /
• 2011

This study conducted a secondary analysis by using original data of performed by Korea Institute for Health and Social Affairs to know factors affecting determinants of health using Lalonde model for the adults aged over 19 years living in Korea. The survey was conducted in 2009 and it evaluated finally 5,867 cases by excluding cases with no answer or a wrong answer. This study model adopted two categories of instrument measure health were objective (Average remaining lifetime) and subjective(EQ-5D) health status. The health determinants included in this study could be divided in to four categories, which were human biology, environment, lifestyle, and health care organization. The results were as follows. In the factors affecting average remaining lifetime, human biology were sex, ages, BMI, showed statistically significant difference, environment category were merry status, education showed statistically significant difference, lifestyle category were exercise, drunks showed statistically significant difference and health care organization category were vaccination, health screening showed statistically significant difference. In the factors affecting EQ-5D, human biology category and health care organization category showed with same average remaining lifetime, environment category were merry status, education, income showed statistically significant difference and lifestyle category were exercise, drunks, stress showed statistically significant difference. The results demonstrated that the best powerful factor was life style category and environment category, the least factor was health care organization category. So lifestyle style and environment category should be considered for the future health plan, budget allocation and the priority in the health care.

• Nuclear Engineering and Technology
• /
• 제42권5호
• /
• pp.568-575
• /
• 2010

Flow Accelerated Corrosion is an active degradation mechanism of CANDU feeder. The tight bend downstream to Gray loc weld connection, close to reactor face, suffers significant wall thinning by FAC. Extensive in-service inspection of feeder wall thinning is very difficult because of the intense radiation field, complex geometry, and space restrictions. Development of a knowledge-based inspection program is important in order to guarantee that adequate wall thickness is maintained throughout the whole life of feeder. Research results and plant experiences are reviewed, and the plant inspection databases from Wolsong Units One to Four are analyzed in order to support developing such a knowledge-based inspection program. The initial thickness before wall thinning is highly non-uniform because of bending during manufacturing stage, and the thinning rate is non-uniform because of the mass transfer coefficient distributed non-uniformly depending on local hydraulics. It is obvious that the knowledge-based feeder inspection program should focus on both fastest thinning locations and thinnest locations. The feeder wall thinning rate is found to be correlated proportionately with QV of each channel. A statistical model is proposed to assess the remaining life of each feeder using the QV correlation and the measured thicknesses. W-1 feeder suffered significant thinning so that the shortest remaining life barely exceeded one year at the end of operation before replacement. W-2 feeder showed far slower thinning than W-1 feeder despite the faster coolant flow. It is believed that slower thinning in W-2 is because of higher chromium content in the carbon steel feeder material. The average Cr content of W-2 feeder is 0.051%, while that value is 0.02% for W-1 feeder. It is to be noted that FAC is reduced substantially even though the Cr content of W-2 feeder is still very low.

• 한국물환경학회지
• /
• 제20권3호
• /
• pp.206-214
• /
• 2004

Residual wall thicknesses, corrosion rates, and residual life of thirty four samples of cast iron pipes(CIPs) and ductile cast iron pipes(DCIPs) collected from water mains of B city were studied to estimate their remaining service life or optimum time of rehabilitation. The internal maximum corrosion depths of samples measured using a dial gauge after shot blasting were twice higher than the external in most cases. Therefore corrosion of water pipes was much more affected by internal water quality than soil. Residual wall thicknesses of DCIPs were higher than those of CIPs. That reason was thought to be that DCIPs have been protected from internal corrosion by lining cement mortar. Residual life calculated by maximum corrosion rate was ranged up to 44 years with 12.40 years average. Since most CIPs were much deteriorated, rehabilitation plan should be established soon in B city. Residual life of DCIP was 33.52 years average. When cement mortar lining is used up by neutralization of DCIPs. DCIP also should be rehabilitated.

• 한국철도학회논문집
• /
• 제17권3호
• /
• pp.193-200
• /
• 2014

본 연구에서는 도시철도 콘크리트궤도 장대레일에 대한 실내피로시험을 수행하였고, 장대레일 잔존수명을 표현한 파괴확률 50% S-N 선도는 적은 실험데이터에 대한 가중치 확률 해석기법을 사용하여 도출하였다. 여기서 피로시험에 사용된 레일들이 누적통과톤수가 서로 다르기 때문에 누적통과톤수를 평균하여 반복횟수를 수정하였다. 또한, 레일표면요철 및 열차속도를 고려한 레일 저부 휨응력은 기존 연구결과 도출된 레일휨응력 예측식을 사용하여 콘크리트궤도 장대레일의 잔존수명을 평가하였다. 레일 피로수명 평가결과, 레일 피로수명이 기준치에 비해 약 2억톤이상 높았다. 또한, 자갈궤도에 비해 콘크리트궤도 레일의 피로수명이 약 3억톤이상 높은 것으로 분석되었다. 따라서 도시철도에서 레일교체기준을 자갈궤도와 콘크리트궤도로 구분할 필요가 있으며, 레일연마를 통한 레일관리가 이루어진다면 기준치가 아닌 목표치로 관리할 수 있을 것으로 판단되었다.

• 에너지공학
• /
• 제8권4호
• /
• pp.605-611
• /
• 1999

화력발전설비 고온요소의 잔여수명평가는 주로 비파괴검사 및 검사결과의 파괴역학적 해석등으로 행해졌다. 그러나 기존 방법은가동중에는 적용되기 어렵고 급작스런 운전이력에 대한 정량적인 손상을 평가할 수 없었다. 따라서 구조물의 형상, 운전이력 및 재료물성에 근거하여 실시간 수명소비율 및 잔여수명을 평가하는 기술의 개발이 요구되고 있다. 본 연구에서는 고온 증기헤더의 수명을 실시간으로 평가하는 감시시스템 소프트웨어를 개발하였다. 고온헤더에 대하여 해석된 온도, 응력, 그린함수를 이용하여 취약부위의 실시간 응력을 계산하고 천이 사이클을 카운트하여 크리프 및, 피로수명을 계산하였다. 본 소프트웨어를 개발함으로써 운전이력에 따른 소비수명을 실시간으로 평가하고 운전정보를 기록하여 향후 운전계획, 보수주기 및 교체시기를 결정하는데 지침이 되도록 하였다.

• Smart Structures and Systems
• /
• 제18권3호
• /
• pp.569-584
• /
• 2016

This paper presents a method for stochastic modelling of fatigue crack growth and optimising inspection and maintenance strategy for the structural members of steel bridges. The fatigue crack evolution is considered as a stochastic process with uncertainties, and the Gamma process is adopted to simulate the propagation of fatigue crack in steel bridge members. From the stochastic modelling for fatigue crack growth, the probability of failure caused by fatigue is predicted over the service life of steel bridge members. The remaining fatigue life of steel bridge members is determined by comparing the fatigue crack length with its predetermined threshold. Furthermore, the probability of detection is adopted to consider the uncertainties in detecting fatigue crack by using existing damage detection techniques. A multi-objective optimisation problem is proposed and solved by a genetic algorithm to determine the optimised inspection and maintenance strategy for the fatigue affected steel bridge members. The optimised strategy is achieved by minimizing the life-cycle cost, including the inspection, maintenance and failure costs, and maximizing the service life after necessary intervention. The number of intervention during the service life is also taken into account to investigate the relationship between the service life and the cost for maintenance. The results from numerical examples show that the proposed method can provide a useful approach for cost-effective inspection and maintenance strategy for fatigue affected steel bridges.