• 한국연초학회지
• /
• 제3권2호
• /
• pp.123-128
• /
• 1981

For evaluating the cigarette smoke quality of nonblended and commercial cigarettes, four modified smoke quality indexes were deduced from considering the reactivity of the thiol group in cystine (SH value) with the cigarette smoke constituents, and from the maximum limited contents of tar. nicotine, and carbon monoxide for the less harmful cigarettes. These results were discussed with respect to correlation coefficients between the indexes and tar/nicotine ratio which had been known reliable for smoke quality evaluation. Among the three indexes, the SH/[(N/O.6) +($\frac{C+T}{8}$)] index was found to be the most reliable and applicable.

• Smart Structures and Systems
• /
• 제20권2호
• /
• pp.115-126
• /
• 2017

The modal identification of large civil structures such as bridges under the ambient vibrational conditions has been widely investigated during the past decade. Many operational modal analysis methods have been proposed and successfully used for identifying the dynamic characteristics of the constructed bridges in service. However, there is very limited research available on reliable criteria for the robustness of these identified modal parameters of the bridge structures. In this study, two time-domain operational modal analysis methods, the data-driven stochastic subspace identification (SSI-DATA) method and the covariance-driven stochastic subspace identification (SSI-COV) method, are employed to identify the modal parameters from field recorded ambient acceleration data. On the basis of the SSI-DATA method, the modal contribution indexes of all identified modes to the measured acceleration data are computed by using the Kalman filter, and their applicability to evaluate the robustness of identified modes is also investigated. Here, the benchmark problem, developed by Hong Kong Polytechnic University with field acceleration measurements under different excitation conditions of a cable-stayed bridge, is adopted to show the effectiveness of the proposed method. The results from the benchmark study show that the robustness of identified modes can be judged by using their modal contributions to the measured vibration data. A critical value of modal contribution index of 2% for a reliable identifiability of modal parameters is roughly suggested for the benchmark problem.

• 대한간호학회지
• /
• 제51권5호
• /
• pp.525-536
• /
• 2021

Purpose: The aim of this study was to assess the Turkish adaptation of the COVID Stress Scale (CSS) on the basis of determining the stress caused by the coronavirus disease (COVID-19) pandemic, and to test its validity and reliability. Methods: The English CSS was translated into Turkish using forward and backward translation. Data were collected online from 360 participants. Construct validity was evaluated using confirmatory factor analysis, exploratory factor analysis, and content validity. Pearson product-moment correlation, Cronbach's alpha reliability coefficient, and test-retest methods were used to evaluate reliability. Results: The Turkish version of the CSS has 36 items consistent with the original scale and has five factors: COVID danger and contamination, socioeconomic consequences of COVID, COVID xenophobia, traumatic stress due to COVID, and compulsive checking for COVID. The construct validity of the Turkish version of the CSS was verified by the adjusted goodness of fit index > .85, and comparative fit index > .95. The content validity index of each item was 91%. The corrected item-total correlations of the scale ranged from .51 to .89. Internal consistency was reliable, with a Cronbach's α of .93. Conclusion: The Turkish version of the CSS is valid and reliable. It can be used as a measurement tool for the assessment of COVID-related stress.

• 한국과학교육학회지
• /
• 제15권1호
• /
• pp.92-103
• /
• 1995

Since the late of 1960,s, the improvement of science inquiry skills has been one of the most important goals in secondary science education. To achieve this goal, it is essential to develop a valid and reliable instrument for evaluating science inquiry skills. The purpose of this study is to develop a valid and reliable instrument for evaluating science inquiry skills for high school students. The instrument is developed through R & D procedure, which includes two field trials of the instrument. This study has formed a clear definition of the elements of science inquiry skills (formulating a hypothesis, controlling variables, designing an experiment, numeric calculation, graphing experimental data, inference, determining relationship, determining causalities, predicting experimental results , drawing a conclusion, formulating a generalization or model), and established the goals of assessment and developed the items of assessment. The instrument, Test of Earth Science Inquiry Skills, consists of 33 items which measure 11 science inquiry skills. There are content-free items for each science inquiry skills. This study has selected 11 science inquiry skills which are considered appropriate for being evaluated by paper-and-pencil test with SIEI (Hur,1984). The content validity of items, objectivity of the scoring keys and clarity of the items were checked by six experienced specialists in science education. At the same time, the two field trials has been executed and produced the reliability of the instrument, item difficulty index, and the effectiveness of distracters. The first field trial was performed using a sample of 304 high school students, and the second one using a sample of 872 high school students. Because the content validity is 84 % and the reliability (K-R 20) is 0.84, the developed instrument in this study is considered valid and reliable. The difficulty index is 49.4 %, answer ratio 59.1 %, the discrimination index 0.47 and the effectiveness of distracters evenly distributed, which also suffice the criteria of good instrument. The developed instrument in this study can diagnosis the well-developed science inquiry skills and the ill-developed science inquiry skills of the students, and trace the degree of the improvement of science inquiry skills.

• 대한한의학회지
• /
• 제17권1호
• /
• pp.48-83
• /
• 1996

Our conclusions for function evaluation tools of Stroke patients are as follows. 1. Evaluating tools of Activities of Daily Living, Katz Index, Barthel Index, Modified Barthel Index have high validity and reliability because of ease of measuring, high accuracy, consistency, sensitivity and sufficient stastistics, but they mainly measure motor function except sense, mentation, language, and social conception. Therefore cerebrovascular disease and brain injury in trauma patients with lacked acknowledgement and sensation, we are not able to apply these tools. 2. PULSES Profile is a useful scale for measuring the patient's over-all status, upper and lower limb functions, sensory components, excretary functions, and intellectual and emotional adaptabilities. It is recognized as a good, useful tool to evaluate patient's whole function. 3. Motor Assessment Scale was designed to measure the progress of stroke patients. The scale was supplemented with upper arm function items. We believe that the Motor Assessment Scale could be a useful evaluation tool with inter-rater reliability ,test-retest reliability. 4. The existing evaluation tools, Katz Index, Barthel Index, Modified Barthel Index, PULSES Profile, Motor Assessment Scale, mainly measured the rehabilitational motor function of sequela of cerebrovascular patients. On the other hand CNS & INH stroke scale can measure cerebrovascular disease patient's neurologic deficits and over-all stautus, which are recognition ability, speech status, motor function, sensory function, activities of daily living. Those scales have been recognized as useful tools to measure function of cerebrovascular disease patients and have increased in use. 5. Every function evaluation tool was recognized to have some validity and inter-rater, test-retest reliability in items of each evaluation tool and total scores of each evaluation tools, but it is thought that none of these scales have been fully validated and proved reliable. Therefore afterward, the development of a highly reliable rating system may best be accomplished by a careful comparison of several tools, using the same patients and the same observers in order to choose the most reliable items from each. 6. Ideal evaluation tools must have the following conditions; (1) It should show the objective functional statues at the same time. (2) It should be repeated consecutively to know changed function status. (3) It should be easy to observe the treatment program. (4) It should have the same result with another rater to help rater exchange information with treatment team members. (5) It should be practical and simple. (6) The patient should not suffer from the observer.

• 한국항해학회지
• /
• 제1권1호
• /
• pp.27-44
• /
• 1977

The Maneuvering Indices of a ship are the values that decide the quantity of her motion in turning when her rudder is turned over to an angle to the starboard or the port. They consist of two kinds of indices, one of which is called index K and the other, index T. Index K decides a ship's turning ability and index T does the length of time delay of a normal turning motion after her rudder has finished the turn of an ordered angle. Generally, the values of the indices are calculated through some mathematic formulas with figures of her heading degrees recorded at a fixed time intervals during her Z test. The values of the same kind index of a ship appear differently according to the ship'sspeed, trim, rudder angle and loaded condition, etc. In this paper, the author analyzed all the amthematic formulas required to calculate the values of the indices in their forming process and examined them from the point of mathematics and dynamics and also actually figured out the values of maneuvering indices of the M.S. "HANBADA", the training ship of Korea Merchant Marine College through her Z test. The author supposed a case in which two same typed ships as the "HANBADA" in size, shape and conditions were approaching each other in meeting end on situation and each ship turned her rudder hard over to the starboard respectively when they approached to the distance of 3 times as long as the ship's length. The author worked out mathematic formulas calculating forward and transverse ship's motions within the above mentioned situation for the quantative analysis of the collision avoding action to certify whether they are in collision status or not. Applying the calculated values of the maneuvering indices of the "HANBADA" to the motion calculating formulas, the author found out the two ships were passing over each other with the clearing distance o 39m between their port quarters. With the above mentioned examinations and explanations, the author demonstrated that a ship's motion in any collision avoiding action can be shown with quantities of time and distance within reliable limit.istance within reliable limit.

• 한국통신학회논문지
• /
• 제28권3C호
• /
• pp.315-326
• /
• 2003

본 논문은 분류 벡터 양자화(CVQ)기법을 이용한 통신 시스템에서 채널 오류를 감소시키기 위한 인덱스벡터할당 방식을 다루고 있다. 제안된 시스템은 크게 내부 인덱스 할당방식(IIA inner index assignment)과 교차인덱스 할당방식(CIA : cross index assignment)으로 구성된다. IIA는 부(Sub)코드북 내에서 유사한 코드벡터들에 Hamming거리가 가까운 인덱스들을 할당함으로써 채널에러에 의해 발생된 화질저하를 감소시킨다. CIA는 인덱스 벡터의 클래스 정보를 나타내는 클래스 비트에 발생하는 채널 오류의 영향을 최소화할 수 있는 방법으로서 IIA에 의해 할당된 인덱스 벡터들을 수정한다. 본 논문에서 실시된 컴퓨터 모의실험은 제안된 시스템이 채널 부호화기법을 사용하지 않고도 채널 잡음을 극복할 수 있음을 보여준다.

• 디지털융복합연구
• /
• 제14권6호
• /
• pp.93-107
• /
• 2016

본 연구는 경영컨설턴트의 역량 및 컨설팅완성도가 경영성과에 미치는 영향을 파악하는데 목적이 있다. 본 연구를 위하여 최근 3년 이내에 경영컨설팅 수행경험이 있는 전국에 소재한 중소기업 500개를 선정하여 수행기업 임직원을 대상으로 총 294부의 설문자료를 수집하여 분석을 수행하였다. 연구결과 첫째, 경영컨설턴트 직무역량은 경영성과인 사업성과와 조직유효성에 유의적인 것으로 파악되었다. 둘째, 경영컨설턴트 직무역량과 공통역량은 컨설팅완성도에 유의적인 것으로 파악되었다. 셋째, 경영컨설턴트 직무역량과 컨설팅완성도는 경영성과에 유의적인 것으로 파악되었다. 넷째, 컨설팅완성도는 경영컨설턴트 직무역량이 경영성과에 미치는 영향을 매개하는 것으로 파악되었다. 다섯째, 경영자지원이 클수록 경영컨설턴트 직무역량이 조직유효성에 미치는 영향은 더욱 커지는 것으로 파악되었다. 이러한 연구결과는 성공적인 컨설팅 수행에 필요한 역량과 요인, 요인들 간의 연관성 파악을 통한 컨설팅 수행주체들에게 효율적인 컨설팅 수행방안 제시로 중소기업 경영컨설팅 활성화에 기여할 수 있을 것으로 본다.

• 품질경영학회지
• /
• 제34권3호
• /
• pp.66-72
• /
• 2006

The process capability indices are widely used to measure the capability of the process to manufacture items within the specified tolerance. Most evaluations on process capability indices focus on point estimates, which may result in unreliable assessments of process performance. The index $C_p$ has been widely used in various industries to assess process performance. In this paper, we propose new testing procedure on assessing $C_p$ index for practitioners to use in determining whether a given process is capable. The provided approach is easy to use and the decision making is more reliable. Whether a process is clearly normal or nonnormal, our bootstrap testing procedure could be applied effectively without the complexity of calculation. A numerical result based on the proposed approach is illustrated.

• 대한인간공학회지
• /
• 제11권1호
• /
• pp.67-79
• /
• 1992

Cardiac systolic time intervals (STLs) and Heather index (HI) were used to access changes in left ventricular function of six male subjects exposed to postural changes,$0^{\circ}C$, ${\pm}2^{\circ}C$, ${\pm}45^{\circ}C$, ${\pm}90^{\circ}C$, Significant prolongation of the pre-ejection period (PEP) and PEP/ LVET ratio, shortening of the left ventricular ejection time (LVET), STI, HI and $1/PEP^{2}$were observed during exposure to both $+45^{\circ}C $ and $+90^{\circ}C $But the values measured during $-45^{\circ}C $ and$-90^{\circ}C $ were reversed. Changes in fluid shift, filling volume, preload, after load and sympathetic activities may account for the observed findings. Early response of cardiac foctions was recorded using impedance cardiography. This method is very simple but accurate. Thus it will be useful in this aerospace and work physiology. In conclusion, STIs appear to provide reliable noninvasive method for examining changes of cardiac function during exposure to postural changes.