• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.374-385
• /
• 2022

In order to investigate the application of 3D base-seismic isolation system in nuclear power plants (NPPs), comprehensive analysis of constitution and design theory for 3-dimensional combined isolation bearing (3D-CIB) was presented and derived. Four different vertical stiffness of 3D-CIB was designed to isolate the nuclear island (NI) building. This paper aimed at investigating the isolation effectiveness of 3D-CIB through modal analysis and dynamic time-history analysis. Numerical results in terms of dynamic response of 3D-CIB, relative displacement response, acceleration and floor response spectra (FRS) of the superstructure were compared to validate the reliability of 3D-CIB in mitigating seismic response. The results showed that 3D-CIB can significantly attenuate the horizontal acceleration response, and a fair amount of the vertical acceleration response reduction of the upper structure was still observed. 3D-CIB plays a significant role in reducing the horizontal and vertical FRS, the vertical FRS basically do not vary with the floor height. The smaller the vertical stiffness of 3D-CIB is, the better the vertical isolation effectiveness is, whereas, it will increase the displacement and the rocking effect of superstructure. Although the advantage of 3D-CIB is that the vertical stiffness can be flexibly adjusted, it should be designed by properly accounting for the balance between the isolation effectiveness and displacement control including rocking effect. The results of this study can provide the technical basis and guidance for the application of 3D-CIB to engineering structure.

• Journal of Korea Trade
• /
• v.24 no.8
• /
• pp.189-206
• /
• 2020

Purpose - This paper attempted to verify the process by which a multinational corporation (MNC)'s subsidiary practices entrepreneurship to create effective knowledge (KC) in the local market. We have looked at whether subsidiary entrepreneurship (SENT) has a moderation effect in creating knowledge for the local market when a subsidiary has been given autonomy (AUT) from the headquarters (HQ). We also argue that when a subsidiary creates meaningful knowledge, the effect of the increased status by the HQ within the MNC network position (NP) has an indirect effect on whether knowledge is transferred to other overseas subsidiaries (KTO). Design/methodology - This paper used a structural equation model (SEM) of 282 effective foreign companies invested in Korea. To test the hypothesis about the process of SENT on KTO, descriptive statistics, confirmatory factor analysis, reliability, convergent and discriminant validities, and common method bias were analyzed using STATA. In addition, the moderation effect was verified along with SEM. The moderation effect of AUT on SENT and KC was presented graphically by confirming \mathrm{\pm1} standard deviation of AUT for the main effect. Findings - Our findings are as follows. First, while the hypothesis about the direct effect of SENT and KC on KTO was not supported, all other hypotheses were supported. Second, both the AUT and moderating effect and the indirect effect of NP were significant. In the conclusion, these findings are discussed in relation to its various theoretical and practical implications. Originality/value - This study attempted to contribute to the knowledge creation theory of MNC by contemplating how subsidiaries can move away from HQ and grow in the local market. Although there is still a shortage of foreign investment in the Korean market, our practical implications offer guidance for how current subsidiaries can develop more than other overseas subsidiaries.

• Journal of Korea Trade
• /
• v.25 no.6
• /
• pp.105-125
• /
• 2021

Purpose - This study analyzes the effects that the response to the technical barriers to trade (TBT), which are used by various countries as means to restrict imports, exerts on exports at a time when protectionism is emerging in the face of a global economic downturn. TBT has been widely used in developed countries for the safety and protection of their people. Recently, the use of TBT as a tool of protectionism has increased considerably in developing countries as well. Therefore, this study analyzes the South Korean SMEs' response and export performance. Design/methodology - To analyze SMEs' response to TBT and their export performance, this study conducted empirical analysis through statistical analysis. To this end, the research established a theory based on previous research and designed its hypothesis and research model. To verify the hypothesis and research model, factor analysis addressing validity and reliability was performed using SPSS 25 and AMOS 26, and the structural equation model was analyzed. Findings - This study found the causal relationship between the independent variable, the mediating variable, and the dependent variable adopted against the theoretical background to have little or no effect, in contrast with previous studies. In a break from previous studies, all hypotheses were rejected for innovation strategic competencies, one of the sub-factors of the independent variable, which is believed to be a result of the lack of practical research related to TBT. Originality/value - Previous studies performed analysis using trade statistics or macro data. A number of such studies analyzed the relationship between technical regulation and trade volume. This study differs from previous studies in some respects, because it analyzed the export performance of companies by establishing a hypothesis and implementing a research model with the factors analyzed in previous studies. In addition, a new attempt has been made by classifying the TBT response factors into technology competencies, human resource competencies, and innovation strategic competencies, and utilizing technology innovation and the export support system as mediating effects.

• Journal of Korean Society of Water and Wastewater
• /
• v.36 no.3
• /
• pp.149-165
• /
• 2022

The water consumption data of individual consumers must be analyzed and forecast to establish an effective water demand management plan. A k-mean cluster model that can monitor water use characteristics based on hourly water consumption data measured using automated meter reading devices and demographic factors is developed in this study. In addition, the quantification model that can estimate the daily water consumption is developed. K-mean cluster analysis based on the four clusters shows that the average silhouette coefficient is 0.63, also the silhouette coefficients of each cluster exceed 0.60, thereby verifying the high reliability of the cluster analysis. Furthermore, the clusters are clearly classified based on water usage and water usage patterns. The correlation coefficients of four quantification models for estimating water consumption exceed 0.74, confirming that the models can accurately simulate the investigated demographic data. The statistical significance of the models is considered reasonable, hence, they are applicable to the actual field. Because the use of automated smart water meters has become increasingly popular in recent year, water consumption has been metered remotely in many areas. The proposed methodology and the results obtained in this study are expected to facilitate improvements in the usability of smart water meters in the future.

• Journal of Biomedical Engineering Research
• /
• v.44 no.3
• /
• pp.182-189
• /
• 2023

CT is a medical device that acquires medical images based on Attenuation coefficient of human organs related to X-rays. In addition, using this theory, it can acquire sagittal and coronal planes and 3D images of the human body. Then, CT is essential device for universal diagnostic test. But Exposure of CT scan is so high that it is regulated and managed with special medical equipment. As the special medical equipment, CT must implement quality control. In detail of quality control, Spatial resolution of existing phantom imaging tests, Contrast resolution and clinical image evaluation are qualitative tests. These tests are not objective, so the reliability of the CT undermine trust. Therefore, by applying an artificial intelligence classification model, we wanted to confirm the possibility of quantitative evaluation of the qualitative evaluation part of the phantom test. We used intelligence classification models (VGG19, DenseNet201, EfficientNet B2, inception_resnet_v2, ResNet50V2, and Xception). And the fine-tuning process used for learning was additionally performed. As a result, in all classification models, the accuracy of spatial resolution was 0.9562 or higher, the precision was 0.9535, the recall was 1, the loss value was 0.1774, and the learning time was from a maximum of 14 minutes to a minimum of 8 minutes and 10 seconds. Through the experimental results, it was concluded that the artificial intelligence model can be applied to CT implements quality control in spatial resolution and contrast resolution.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.4
• /
• pp.711-728
• /
• 2023

This study aims to validate the user experience associated with the personalized recommendation systems of fashion vertical platforms. The investigation focused on women aged 18 to 30 with prior experience using personalized fashion recommendation systems. The collected data were analyzed using SPSS 26.0 and AMOS 26.0, and the outcomes can be summarized as follows. Firstly, the diversity and usefulness of information quality exerted a positive effect on use satisfaction. Secondly, the affirmative impact of the reliability of system quality on user satisfaction was established, although stability was not confirmed. Thirdly, the study identified a favorable connection between ease-of-use of service quality and user satisfaction, while the influence of tangibles was unsubstantiated. Fourthly, the degree of self-reference was found to have a positive effect on user satisfaction. Fifthly, a constructive relationship emerged between user satisfaction and both continuous-use intention and recommendation intention. Lastly, there was a significant difference in the magnitude of the effect of ease-of-use on satisfaction according to self-regulatory focus. The findings of this study hold the potential to enhance the explanatory and predictive power of the field of consumer behavior within the novel shopping landscape of fashion vertical platforms.

• Journal of Information Science Theory and Practice
• /
• v.10 no.spc
• /
• pp.56-65
• /
• 2022

Korea Institute of Science and Technology Information (KISTI) is a Worldwide LHC Computing Grid (WLCG) Tier-1 center mandated to preserve raw data produced from A Large Ion Collider Experiment (ALICE) experiment using the world's largest particle accelerator, the Large Hadron Collider (LHC) at European Organization for Nuclear Research (CERN). Physical medium used widely for long-term data preservation is tape, thanks to its reliability and least price per capacity compared to other media such as optical disk, hard disk, and solid-state disk. However, decreasing numbers of manufacturers for both tape drives and cartridges, and patent disputes among them escalated risk of market. As alternative to tape-based data preservation strategy, we proposed disk-only erasure-coded archival storage system, Custodial Disk Storage (CDS), powered by Exascale Open Storage (EOS), an open-source storage management software developed by CERN. CDS system consists of 18 high density Just-Bunch-Of-Disks (JBOD) enclosures attached to 9 servers through 12 Gbps Serial Attached SCSI (SAS) Host Bus Adapter (HBA) interfaces via multiple paths for redundancy and multiplexing. For data protection, we introduced Reed-Solomon (RS) (16, 4) Erasure Coding (EC) layout, where the number of data and parity blocks are 12 and 4 respectively, which gives the annual data loss probability equivalent to 5×10^-14. In this paper, we discuss CDS system design based on JBOD products, performance limitations, and data protection strategy accommodating EOS EC implementation. We present CDS operations for ALICE experiment and long-term power consumption measurement.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.43-43
• /
• 2020

보령댐은 충남 서부지역 8개 시·군에 생활용수와 공업용수를 공급하고 있는 중요한 수원으로 최근 우리나라에서 발생한 연속적인 가뭄으로 2015년에는 저수율이 7.5 %까지 감소하여 제한급수가 시행되었다. 본 연구에서는 가뭄으로 인한 물 공급 부족에 취약함을 보인 보령댐 유역(297.4 ㎢)을 대상으로 SWAT(Soil and Water Assessment Tool) 모델과 RCP(Representative Concentration Pathways) 시나리오를 활용하여 극한 기후변화 사상이 반영된 보령댐의 내한능력을 평가하였다. SWAT 모형을 활용하여 보령댐의 물수지를 모의하기 위하여 보령댐의 실측 유출량, 저수량, 방류량으로 보령댐 유입량과 저수량을 보정(2002~2004) 및 검정(2005~2007)하였으며, 실측 저수량을 기반으로 미래 댐 운영을 모의하였다. 검·보정 결과, 댐 유입량과 저수량의 PBIAS(%)는 -0.04, -0.09, NSE(Nash and Sutcliffe Efficiency)는 0.52, 0.96, RMSE(Root Mean Square Error)는 1.80 mm/day, 0.67 × 10⁶㎥로 분석되어 신뢰성 있는 모의 결과를 보였다. 보정된 SWAT 모형으로 가뭄 사상이 반영된 기후변화를 모의하기 위하여 APCC의 26개 CMIP5 GCM 시나리오를 SPI (Standardized Precipitation Index)와 연속 이론(Runs theory)으로 분석하여 6개의 극한 가뭄 시나리오 (RCP 4.5, 8.5 CMCC-CM, INM-CM4, IPSL-CM5A-MR)를 선정하였으며, 선정된 시나리오를 모형에 적용하여 가뭄 사상을 반영한 보령댐의 미래 내한능력을 평가하였다. 내한능력평가 및 분석 기간은 Historical(1980~1999; 1990s), Present(2000~2019; 2010s), 그리고 미래 기간 (2020~2039; 2030s, 2040~2059; 2050s, 2060~2079; 2070s, 2080~2099; 2090s)으로 나누었으며, 취약성(Reliability), 회복성(Resilience), 위험성(Vulnerability), 세 가지 지표로 내한능력 평가를 수행하였다. 평가 결과, 미래 취약성은 2050s IPSL-CM5A-MR 시나리오에서 0.803까지 감소하였으며, 회복성과 위험성은 2070s IPSL-CM5A-MR 시나리오에서 0.003, 3,567.6 × 10⁶㎥까지 감소하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6C
• /
• pp.377-384
• /
• 2006

Theoretical and experimental study of the unconfined penetration (UP) test was conducted to suggest a new test method (referred to as IUP, Improved Unconfined Penetration) for determination of the tensile strength of compacted sand-bentonite mixtures. The tensile strength of compacted mixtures can be calculated from limit analysis based on the theory of perfect plasticity. The measurement errors in new test method were reduced by improving the UP device. Preliminary experiment results indicate that the tensile strength increases with increasing the disk size, loading rate and pH level. In addition, the disk diameter with 25.4 mm and the loading rate with 0.5%/min~1%/min are most suitable condition for the IUP test. The reliability of IPU test was verified by through the fact that good agreement between the IUP and conventional split tensile test results is observed.

• Structural Engineering and Mechanics
• /
• v.89 no.1
• /
• pp.33-46
• /
• 2024

The present research delves into the analysis of nonlinear free and forced vibrations of porous functionally graded (FG) shallow shells reinforced with oblique stiffeners, which are embedded in a nonlinear elastic foundation (NEF) subjected to external excitation. Two distinct types of PFG shallow shells, characterized by even and uneven porosity distribution along the thickness direction, are considered in the research. In order to model the stiffeners, Lekhnitskii's smeared stiffeners technique is implemented. With the stress function and first-order shear deformation theory (FSDT), the nonlinear model of the oblique stiffened shallow shells is established. The strain-displacement relationships for the system are derived via the FSDT and utilization of the von-Kármán's geometric assumptions. To discretize the nonlinear governing equations, the Galerkin method is employed. The model such developed allows analysis of the effects of the stiffeners with various angles as desired, in addition to the quantitative investigation on the influence of the surrounding nonlinear elastic foundations. To numerically solve the problem of vibrations, the 4th-order P-T method is used, as this method, known for its enhanced accuracy and reliability, proves to be an effective choice. The validation of the present research findings includes a comprehensive comparison with outcomes documented in existing literature. Additionally, a comparative analysis of the numerical results against those obtained using the 4th Runge-Kutta method is performed. The impact of stiffeners with varying angles and material parameters on the vibration characteristics of the present system is also explored. The researchers and engineers working in this field may use the results of this study as benchmarks in their design and research for the considered shell systems.