• Journal of Information Technology Applications and Management
• /
• 제12권2호
• /
• pp.1-13
• /
• 2005

This paper proposes a software-reliability growth model incoporating the amount of testing effort expended during the software testing phase after developing it. The time-dependent behavior of testing effort expenditures is described by a Logistic curve. Assuming that the error detection rate to the amount of testing effort spent during the testing phase is proportional to the current error content, a software-reliability growth model is formulated by a nonhomogeneous Poisson process. Using this model the method of data analysis for software reliability measurement is developed. After defining a software reliability, This paper discusses the relations between testing time and reliability and between duration following failure fixing and reliability are studied. SRGM in several literatures has used the exponential curve, Railleigh curve or Weibull curve as an amount of testing effort during software testing phase. However, it might not be appropriate to represent the consumption curve for testing effort by one of already proposed curves in some software development environments. Therefore, this paper shows that a logistic testing-effort function can be adequately expressed as a software development/testing effort curve and that it gives a good predictive capability based on real failure data.

• Nuclear Engineering and Technology
• /
• 제31권1호
• /
• pp.49-57
• /
• 1999

It has been a critical issue to predict the safety critical software reliability in nuclear engineering area. For many years, many researches have focused on the quantification of software reliability and there have been many models developed to quantify software reliability. Most software reliability models estimate the reliability with the failure data collected during the test assuming that the test environments well represent the operation profile. User's interest is however on the operational reliability rather than on the test reliability. The experiences show that the operational reliability is higher than the test reliability. With the assumption that the difference in reliability results from the change of environment, from testing to operation, testing environment factors comprising the aging factor and the coverage factor are developed in this paper and used to predict the ultimate operational reliability with the failure data in testing phase. It is by incorporating test environments applied beyond the operational profile into testing environment factors. The application results show that the proposed method can estimate the operational reliability accurately.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제12권3호
• /
• pp.187-199
• /
• 2012

In general, accelerated life testing is performed to reduce testing time. But it is difficult to apply accelerated life testing to a system besides components. This paper developed a software which estimates reliability measures of the system from results of accelerated life testing of components building the system. This software can handle the system with a large number of components and complex topology. Multiple failure modes of a component were also considered in this software. Based on the software, reliability measures of a gearbox example at several conditions were estimated from the accelerated life testing results of three components of the gearbox.

• 품질경영학회지
• /
• 제48권3호
• /
• pp.395-408
• /
• 2020

Purpose: This study was performed for advancement of aviation security equipments certification system. Methods: We investigated aviation security equipments certification-related registrations and the latest research trends of explosive detection technologies. Based on the literature studies, we draw the critical issues of the aviation security equipment certification system and suggested improvement direction. Results: We found some inaccuracies of the definition of explosive trace detection equipments, accreditation review committee, and performance evaluation test method. These problems should be modified to suit being practical. Conclusion: The present results would be useful for basic data for modifying aviation security equipments certification systems.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 춘계 종합학술대회 논문집
• /
• pp.444-447
• /
• 2006

본 논문에서는 소프트웨어 테스트 단계중에 발생되는 테스트노력 소요량을 고려한 소프트웨어 신뢰도 성장 모델을 제시하여 시간종속적인 테스트 노력소요량 동태를 일정 테스트 노력일 때와 웨이블 테스트 노력일 때를 비교하여 연구한다. 소프트웨어 신뢰도 척도에 대한 데이터 분석기법을 개발하도록 한다. 테스트 시간의 경과와 신뢰도와의 관계도 심도 있게 연구한다. 목표신뢰도를 만족시키는 최적발행시각을 정한다. 개발 후 테스트를 시작하기 전의 신뢰도가 어떠한 조건에 있는가를 검토하여 각 조건에 따른 최적 발행시각을 결정한다.

• 품질경영학회지
• /
• 제29권4호
• /
• pp.92-102
• /
• 2001

Software testing during development and operation should exercise to obtain the desired software quality and leave failure data set. So far, many software reliability models are classified and can be used to measure a software reliability only based on its failure history But, in practice, developers or testers of software systems must decide which existing software reliability model can be fitted. In this paper, we will show that an appropriate reliability model can be selected by considering relations between characteristics of each testing environment and models' assumptions. Several methods of software testing are presented and discussed. Also, unit test, integrated test, function test and system test that are sequentially exercised during development will be introduced.

• Journal of Information Technology Applications and Management
• /
• 제13권4호
• /
• pp.1-12
• /
• 2006

Many software reliability growth models(SRGM) have been proposed since the software reliability issue was raised in 1972. The technology to estimate and grow the reliability of developing S/W to target value during testing phase were developed using them. Most of these propositions assumed the S/W debugging testing efforts be constant or even did not consider them. A few papers were presented as the software reliability evaluation considering the testing effort was important afterwards. The testing effort forms which have been presented by this kind of papers were exponential, Rayleigh, Weibull, or logistic functions, and one of these 4 types was used as a testing effort function depending on the S/W developing circumstances. I propose the methology to evaluate the SRGM using least square estimator and maximum likelihood estimator for those 4 functions, and then examine parameters applying actual data adopted from real field test of developing S/W.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권1호
• /
• pp.55-63
• /
• 2013

For a reliability assessment of large machinery parts, reliable data should be obtained from testing many samples for a long time. However, in case of testing these samples, testing cost is excessive; in case of life test for long time, power consumption is high; and in case of accelerated test by over load, very high cost is required to build the life testing device. Especially it is very frequent that the expensive device's life has ended during a accelerated test by over load. In this study, the design mechanism of the life testing device which excels in energy saving during the reliability test of large machinery parts has been introduced.

• 정보처리학회논문지D
• /
• 제8D권6호
• /
• pp.835-842
• /
• 2001

본 논문에서는 소프트웨어 시험 단계중에 발생되는 시험노력 소요량을 고려한 소프트웨어 신뢰도 성장 모델을 제시하여 시간종속적인 시험 노력소요량 동태를 웨이블 곡선으로 설명한다. 시험 단계중에 소요되는 시험노력의 양에 대한 결함 검출비를 현재의 결함 내용에 비례하는 것으로 가정하여 소프트웨어 신뢰도 성장 모델을 비동차 포아송 프로세스(NHPP)로 공식화하되, 이 모델을 이용하여 소프트웨어 신뢰도 척도에 대한 데이터 분석기법을 개발한다. 시험 시간의 경과와 신뢰도와의 관계, 시험비용과 신뢰도와의 관계를 연구한다. 소프트웨어의 비용을 고찰함에 있어서 조건별로 검토하여 비용이 최소로 되는 발행시각을 결정하되, 목표신뢰도를 만족시키는 최적발행시각을 정한다. 비용의 입장에서 발행 시각을 결정하는 문제와 신뢰도의 입장에서 발행 시각을 결정하는 문제를 동시에 고려하여 최적 발행시각을 결정하도록 한다.

• 품질경영학회지
• /
• 제49권2호
• /
• pp.113-125
• /
• 2021

Purpose: This study focused on reality and quality improvement of aviation security equipment performance certification system. Methods: For this propose, we analyzed aviation security equipment performance certification system related legislations. Using analyzed data, we suggested advancement plan of aviation security equipment performance certification system. Results: In results, South Korea has been implementing aviation security performance certification system since October 2018. Parts for improvement of system are mutual certification with major countries that operate aviation security equipment performance certification systems, the spread of the defense industry's system, development of similar substances for handling explosives, and introduction of preliminary inspections. Conclusion: The research result could be used as a basic data for upgrading Korea's aviation security performance certification system.