• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.5
• /
• pp.2218-2244
• /
• 2016

In this paper, we propose a hybrid routing scheme that utilizes location information to support reliable data transmission in mobile ad hoc networks. The proposed scheme determines and maintains routing path by considering the directionality and connectivity of nodes using grid zones and information on neighbor nodes. In addition, it generates alternative paths with consideration for node distance and reliability. To show the superiority of the proposed routing scheme, a performance evaluation was conducted using simulations. The performance evaluation results show that the proposed scheme offers faster and more reliable data transmission than the existing routing schemes, and the number of messages decreases by approximately 31% compared to the existing schemes on average.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.7
• /
• pp.1302-1308
• /
• 2010

In this study, Zigbee Sensor Node to transmit harmful gases CO and $CO_2$ information using wireless communication within the ground and underground structures were developed. Wireless communication protocol was used Zigbee Stack included IEEE 802. 15.4 MAC protocol. For wireless transmission of detected harmful gas signal from ADC of MCU was implemented Zigbee Sensor Node that was developed protocol using Serial-Port-Profile(SPP) here. The proposed Zigbee Sensor Node was verified transmission distance from experiments. Transmission distance was into 90m in experiments. Distance experiments were measured at 10m intervals using sine & pulse wave input signal at indoors. The proposed Route Sensor Node was applied mesh routing protocol. When built up USN(Ubiquitous Sensor Network)using Route Sensor Node, transmission distance was not limited. On the experimental results, harmful gas values between direct measurements and USN measurements were consistent. The semiconductor CO sensor and N-DIR $CO_2$ sensor module as a harmful sensor was used. Therefore, the proposed Zigbee Sensor Node was verified about reliability and validity to build USN for transmission of harmful gas information.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.2
• /
• pp.71-78
• /
• 2012

The digital tachograph is a device that automatically records speed and distance of a vehicle, together with the driver's activity and vehicle status at an accident. It records vehicle speed, break status, acceleration, engine RPM, longitude and latitude of GPS, accumulated distance, and so on. European Commission regulation made digital tachographs mandatory for all trucks from 2005. Republic of Korea made digital tachographs mandatory for all new business vehicles from 2011 and is widening the range of vehicles that must install digital tachographs year by year. This device is used to analyze driver's daily driving information and car accidents. Under a car accident that makes the device reliability unpredictable, it is very important to store driving information with maximum reliability for its original mission. We designed and implemented a practical digital tachograph. This paper presents a storage scheme that consists of a first storage device with small capacity at a high reliability and a second storage device with large capacity at a low cost in order to reliably records data with a hardware at a low cost. The first storage device records data in a SLC NAND flash memory in a log-structured style. We present a reverse partial scan that overcomes the slow scan time of log-structured storages at the boot stage. The scheme reduced the scan time of the first storage device by 1/50. In addition, our design includes a scheme that fast stores data at a moment of accident by 1/20 of data transfer time of a normal method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.11
• /
• pp.1021-1027
• /
• 2007

A construction noise is the main reason for people's petition among the pollution. The purpose of this study is to develop the noise prediction program to see the level of the noise on the construction site more accurately. For this purpose, the database of the power level on the various equipments was made. The noise reduction by distance and the noise reduction by diffraction of barrier were mainly considered and calculated. The simple noise prediction program will provide the information about proper height and length of the potable barrier which satisfies noise criteria of the construction sites from a construction planning stage. To investigate the reliability of this program, the predicted data was compared with the measured data. An average of difference between measured data and predicted data is $0.1{\sim}2.8\;dB(A)$ and a coefficient of correlation is about $0.85{\sim}0.95$.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.597-598
• /
• 2015

In order to improve the reliability of cost estimation results using CBR, there has been a continuous issue on similarity measurement to accurately compute the distance among attributes and cases to retrieve the most similar singular or plural cases. However, these existing similarity measures have limitations in taking the covariance among attributes into consideration and reflecting the effects of covariance in computation of distances among attributes. To deal with this challenging issue, this research examines the weighted Mahalanobis distance based similarity measure applied to CBR cost estimation and carries out the comparative study on the existing distance measurement methods of CBR. To validate the suggest CBR cost model, leave-one-out cross validation (LOOCV) using two different sets of simulation data are carried out. Consequently, this research is expected to provide an analysis of covariance effects in similarity measurement and a basis for further research on the fundamentals of case retrieval.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.5
• /
• pp.71-78
• /
• 2010

Teachers have to measure the distance from their students' houses to neighboring schools manually by using ruler or driving cars every year. Not only it makes an significant overhead, but it also makes a problem of reliability of measured distance. The problem of fairness exists as well if measured distance is incorrect erroneously or deliberately. In this paper, we propose a scheme for constructing GIS and use its data for assigning students for entering middle schools without tests. We analyze the manually measured first and second nearest schools by using GIS data and confirm the measured distances have considerable errors. We also assign students based on the first and the second nearest school by using GIS. As a result, the distance to the assigned school reduced significantly and the fairness increases as well.

• Smart Structures and Systems
• /
• v.23 no.3
• /
• pp.279-293
• /
• 2019

To ensure high quality data being used for data mining or feature extraction in the bridge structural health monitoring (SHM) system, a practical sensor fault diagnosis methodology has been developed based on the similarity of symmetric structure responses. First, the similarity of symmetric response is discussed using field monitoring data from different sensor types. All the sensors are initially paired and sensor faults are then detected pair by pair to achieve the multi-fault diagnosis of sensor systems. To resolve the coupling response issue between structural damage and sensor fault, the similarity for the target zone (where the studied sensor pair is located) is assessed to determine whether the localized structural damage or sensor fault results in the dissimilarity of the studied sensor pair. If the suspected sensor pair is detected with at least one sensor being faulty, field test could be implemented to support the regression analysis based on the monitoring and field test data for sensor fault isolation and reconstruction. Finally, a case study is adopted to demonstrate the effectiveness of the proposed methodology. As a result, Dasarathy's information fusion model is adopted for multi-sensor information fusion. Euclidean distance is selected as the index to assess the similarity. In conclusion, the proposed method is practical for actual engineering which ensures the reliability of further analysis based on monitoring data.

• The Journal of Korean Association of Computer Education
• /
• v.17 no.2
• /
• pp.53-64
• /
• 2014

The purpose of the study is to develop a scale for measuring learning outcomes in the distance teacher training programs. In order to develop the measurement instrument, the forty-four items were developed based on the literature review and ten experts' review. For data collection, a web-based survey was conducted among teachers taking a distance teacher training program at National Education Training Institute. With the data of 205 sample size from the first survey, the Exploratory Factor Analysis was conducted and seven factors were identified. In order to validate the test, the Confirmatory Factor Analysis was performed with 293 respondents from the second survey. In conclusion, this study reports the reliability and validity of a scale for learning outcomes in distance teacher training programs consisting of seven factors with 34 items; 1) system quality, 2) content quality, 3) service quality, 4) use, 5) benefit, 6) satisfaction, 7) transfer.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.142-148
• /
• 2015

Due to advancements in technology and manufacturing capability, it is not uncommon that life tests yield no or few failures at low stress levels. In these situations it is difficult to analyse lifetime data and make meaningful inferences about product or system reliability. For some products or systems whose performance characteristics degrade over time, a failure is said to have occurred when a performance characteristic crosses a critical threshold. The measurements of the degradation characteristic contain much useful and credible information about product or system reliability. Degradation measurements of the performance characteristics of an unfailed unit at different times can directly relate reliability measures to physical characteristics. Reliability prediction based on physical performance measures can be an efficient and alternative method to estimate for some highly reliable parts or systems. If the degradation process and the distance between the last measurement and a specified threshold can be established, the remaining useful life is predicted in advance. In turn, this prediction leads to just in time maintenance decision to protect systems. In this paper, we describe techniques for mapping product or system which has degrading performance parameter to the associated classical reliability measures in the performance domain. This paper described a general modeling and analysis procedure for reliability prediction based on one dominant degradation performance characteristic considering pseudo degradation performance life trend model. This pseudo degradation trend model is based on probability modeling of a failure mechanism degradation trend and comparison of a projected distribution to pre-defined critical soft failure point in time or cycle.

• Journal of Information Technology Services
• /
• v.20 no.2
• /
• pp.91-109
• /
• 2021

Recently, social and economic environment has been rapidly changed. In particular, the development of IT technology accelerated the introduction of databases, communication networks, information processing and analyzing systems, making the use of such information and communication technology an essential factor for corporate management innovation. This change also affected the accounting areas. The purpose of this study is to document changes in accounting areas due to the adoption of IT technologies in the era of technology and information, to define the required accounting professions in this era, and to present the efficient educational methodologies for training such accounting experts. An accounting expert suitable for the era of technology and information means an accounting profession not only with basic accounting knowledge, competence, independency, reliability, communication skills, and flexible interpersonal skills, but also with IT skills, data utilization and analysis skills, the understanding big data and artificial intelligence, and blockchain-based accounting information systems. In order to educate future accounting experts, the accounting curriculum should be reorganized to strengthen the IT capabilities, and it should provide a wide variety of learning opportunities. It is also important to provide a practical level of education through industry and academic cooperation. Distance learning, web-based learning, discussion-type classes, TBL, PBL, and flipped-learnings will be suitable for accounting education methodologies to foster future accounting experts. This study is meaningful because it can motivate to consider accounting educational system and curriculum to enhance IT capabilities.