• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.19-30
• /
• 2012

The majority of daily travel demands concentrate at particular time-periods, which causes the difficulties in the travel demand analysis and the corresponding benefit estimation. Thus, it is necessary to consider time-specific traffic characteristics to yield more reliable results. Traditionally, na$\ddot{i}$ve, heuristic, and statistical approaches have been applied to address the peak-hour ratio. In this study, a hybrid clustering model which is one of the statistical methods is applied to calculate the peak-hour ratio and its duration. The 2009 national 24-hour traffic data provided by the Korea institute of Construction Technology are used. The analysis is conducted dividing vehicle types into passenger cars and trucks. For the verification for the usefulness of the methodology, the toll collection system data by the Korea Express Corporation are collected. The result of the research shows lower errors during the off-peak hours and night times and increasing error ratios as the travel distance increases. Since the method proposed can reduce the arbitrariness of analysts and can accommodate the statistical significance test, the model could be considered as a more robust and stable methodology. It is hoped that the result of this paper could contribute to the enhancement of the reliability for the travel demand analysis.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.528-536
• /
• 2009

Recently, the importance of IPTV providing multimedia service over IP based networks managed to provide the required level of quality of service and experience, security, interactivity and reliability has been gradually increasing by the commercialization of its service. However, the original purposes of IPTV service - contents are produced and consumed anytime, anywhere, and over any device at the same time - have not been satisfied by service providers because most services offered by service providers depend on closed IPTV platform. In this paper, we propose an open IPTV service platform that an individual or small company can easily produce contents and offer IPTV service independently from the existing closed IPTV platform.. The proposed IPTV platform exploits overlay multicast scheme to offer reasonable service under the environment where network bandwidth and processor resource are limited. It also uses CDN-like scheme to ensure the quality of transmitted contents. The performance evaluation shows that the proposed IPTV platform has the possibility of being an open IPTV platform considering its results such as the quality of transmitted contents, the transmission rate, the channel zapping time, and so on. It also shows that proposed IPTV platform could be applied to real IPTV service with continuous enhancement of its functions and user interfaces.

• Journal of the Korea Concrete Institute
• /
• v.23 no.2
• /
• pp.211-217
• /
• 2011

Although a compression splice length does not need to be longer than a tension splice length due to end bearing effect, current design codes impose a longer compression lap splice than a tension lap splice in high strength concrete. Hence, new criteria for the compression lap splice including concrete strength effect need to be found for economical design of ultra-high strength concrete. An experimental study has been conducted using column specimens with concrete strength of 80 and 100 MPa with transverse reinforcement. The test results showed that splice strengths improved when the amount of transverse reinforcement increased. However, end bearing strength did not increase when larger amount of transverse reinforcement is provided within the spliced zone. Therefore, the splice strength enhancement was attributed to the improvement of bond. From regression analysis of 94 test results including specimens made with concrete strength of 40 and 60 MPa, a new design equation is proposed for compression lap splice in the concrete compressive strength ranging from 40 to 100 MPa with transverse reinforcement. By using the proposed equation, the incorrect design equations for lap splice lengths in tension and compression can be corrected. In addition, the equation has a reliability equivalent to those of the specified strengths of materials.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.4
• /
• pp.314-321
• /
• 2000

A gap between a $Al_2O_3/Fe$ thermite and lower head vessel is formed in the lower-plenum arrested vessel attack(LAVA) experiment which is the 1st phase study of simulation of naturally arrested vessel attack in vessel(SONATA-IV). The gap measurement using a conventional ultrasonic method would be lack of a reliability due to the structure complexity and the metallurgical grain size change of the lower head HAZ occurred by a thermite $Al_2O_3/Fe$ melt or a $Al_2O_3$ melt at $2300^{\circ}C$. The grain echoes having false signals and lower S/N ratio signals are detected due to a multiple scattering, a mode conversion and an attenuation of a ultrasonic resulted from at the interface of increased grain size zone. In this test, the signals pattern was classified to understand the behavior of the ultrasonic in a multi-layer specimen of solid-liquid-solid of assuming that the thermite and the lower head vessel is immersed. The polarity threshold algorithm of frequency diversity gives us the enhancement about 6dB of the ratio S/N.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.1
• /
• pp.39-48
• /
• 2009

Biodiesel is estimated to be the best recycling energy source as an alternative fuel for transportation vehicles which represents the biggest share of greenhouse effect gas exhausts. Thus, in order to widely expand use of biodiesel and to enhancement its reliability, studies on quality improvement of biodiesel is needed. In this study, we have produced biodiesel(BD100, BD20) through esterification reaction using raw material of waste frying oil and analyzed compatibility with 24 items of quality criteria. As waste frying oil has high contents of unsaturated fatty acid such as Oleic acid, Linoleic acid and Linolenic acid, it is confirmed that there is no problem in using the same as a raw material of biodiesel. The result of analyzing the quality criteria items of biodiesel showed that it satisfied all the quality criteria except the oxidation stability of BD100, which was 2 hours, fatty acid methyl ester of BD20, which was 18.6w% and the filter plugging point, which was $-5^{\circ}C$. We believe that it will contribute to improved utilization of waste resources as alternative energy if studies on technology to improve quality of some items are provided.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.3
• /
• pp.191-199
• /
• 2014

The current rural conditions are undergoing the change from the past production-intensive structure to an integral and complex one of producing, processing, selling, touring and lodging owing to the changes of life-style, consumption trend and social environments. The rural area is developing into a community of rural tourism villages to grow into one management system along with the assistance of the government's various supporting projects. Through this, the rural designing has got to play a significant role as one of the factors of the enhancement of competitiveness and the increase of income. Therefore, those previous studies on the variety and possibility of rural development are being employed for the researches which are to develop techniques of branding, marketing and packaging. In particular, the researches for VI (Village Identity), BI (Brand Identity) and designs of landscaping, packaging of agricultural specialties and display stores, which definitely shows that the importance of rural designing, is being paid a lot more attention to. Thus, this study has verified the site commercialization and its effect by developing some practical designing with the focus of package design at rural tourism villages. The Okgye Village in Yoncheon was selected for study subject based on the result of status investigation. This study has analyzed such problems as lack of village identity, non-description of items and their indispensible marks which were seen their designs of village and packaging. The colors of major items and the village image being substituted into the image scale of IRI color were estimated so that the appropriate colors might be selected, along with which the shapes of major items were decided to be motif for the village symbol and design to be created. The designs of such major items as grains, greens and sauces were created with the consideration of the easiness of loading, the continuity of using and the aesthetics. For grains, those outer boxes which are possible for set-packaging and small-sized packaging have been developed. For greens were developed the boxes with the structure of the permeability for the persisten't quality as well as the possibility for packaging small amount. In case of sauces, those outer-boxes equipped with fixing tray were made with the transport-convenience taken into consideration. The sticker-label designs for all those three were also developed which stand for the village identity and are conveniently used in each farm family. When this development was applied at the sites, it was found that the satisfaction and reliability of consumers as well as the satisfaction of farmers were raised along with the increase by more than 30% after the improvement.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.3
• /
• pp.42-52
• /
• 2013

In this study, value of VMS (Variable Message Sign) traffic information is estimated by using CVM (Contingent Valuation Method), which is developed to quantify the value of non-marketable goods in environmental economics. CVM is used to estimate the value of goods provided by a project under consideration and then the project feasibility can be indirectly examined on the basis of the estimated value. This study focuses on estimating to estimate value of traffic information provided through VMS, a part of the transportation system enhancement project by Korea Expressway Corporation which is aimed at mitigating traffic problems on expressways. In particular, this study analyzes value of information separately by trip purpose, information type, and traffic flow condition. A state preference survey was designed to estimate the value of non-marketable traffic information. To maximize reliability of the survey results, a pilot survey was taken before the main survey. The open-ended question method was adopted in capturing users' willingness-to-pay. Both Tobit and binary Probit models were applied in estimating the value of VMS traffic information and their parameters were estimated using the maximum likelihood estimation. The estimation results suggests that the value of traffic information perceived by users is 518.28 KRW.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3B
• /
• pp.235-246
• /
• 2009

The number of industry wireless networks based on IEEE 802.11 WLAN technology deployed in large outdoor work sites, such as freight container terminal, is increasing these days. Wider service coverage, frequent movements of stations and high requirement on service reliability are main characteristics of these networks compared to the conventional IEEE 802.11 networks used in home, office and school. While the importance of these networks Bets higher, we can hardly find previous studies including concrete analysis on these networks based on actual experiments. We carried out several field experiments at a freight container terminal to analyze its IEEE 802.11 network and found out some problematic situations, such as over 50% retransmission rates and frequent disruption of communication link while a station is moving. We explain why these problematic situations happen and suggest some solutions, such as application of mesh technology, smart handoff based on location and movement pattern and adjustment of signal strength and channel allocation. Methods and tools used in the experiments are also detailed in the paper which may be helpful for similar future studies.

• Child Health Nursing Research
• /
• v.7 no.3
• /
• pp.342-358
• /
• 2001

The purpose of the study is both to develope the group counseling program applying Reality Therapy, by which positive body image could be conceived by adolescent women, by helping them identify their bodies as what they are, and then admit their real bodies, and also find out some practical methodologies of self-esteem, and to verify the program to show how effectively this program can be applied to them. Data were collected by self-reported questionnaires(body image and depression) from 59 high school girls in Seoul who were selected by criteria of this study, from the 1st of September to 10th of November, 2000. The experimental group participated in the group counseling by applying Reality Therapy with 8 sessions for 4 weeks. Descriptive statistics, homogeneity test, hypothesis testing, reliability were performed statistically by utilizing SAS pc program, and additionally the reaction due to the change of body image by adolescent women was also analyzed. The results drawn through the present study are as follows: 1. A hypothesis that 'adolescent women who participated in the group counseling program by applying Reality Therapy may get higher points on body image than adolescent women who did not participated' has been adopted (t=6.73, p=.000). 2. A hypothesis that 'adolescent women who participated in the group counseling program by applying Reality Therapy may get lower points on depression than adolescent women who did not participated' has been adopted (t=5.28, p=.000). 3. After applying the group counseling program, the degree of depression for upper group who obtained higher preliminary points on depression has decreased rather meaningfully more than that for lower group who obtained higher preliminary points(t=5.58, p=.000). 4. Reactions associated with positive change in body image of adolescent women who participated in the group counseling program by applying Reality Therapy has been shown to be body acceptance, enhancement of self-esteem, and change of value judgment of beauty. 5. The difference in the motivation and attitude of each group has been observed, by analyzing the reactions obtained from those who show the highest change of body image and those who show the lowest change of body image through the group counseling program by applying Reality Therapy. According to the present studies, it can be concluded that the group counseling program by applying Reality Therapy has turned out as an effective strategy for nursing intervention for adolescent women, by helping them form positive body images and reducing depression.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.341-348
• /
• 2016

Harbor facilities require long-term durability and safety, and also maintain the performance requirement until the durability life. However, existing harbor facilities are becoming superannuated with durable years and durability is declined by erosion of the sea and damage from sea. In addition, harbor facilities will be in demand for the expansion of harbor and offshore structures with rising economic power by enhancement of domestic industry and increase of import and export. Therefore, in this study, two kinds of nondestructive test (NDT) techniques (schmidt rebound hammer and ultrasonic sensor) are verified for the effective maintenance of underwater concrete structures including harbor facilities. Sea field applicability of Schmidt hammer and ultrasonic sensor was verified by comparing field test result with sea field test result and also deduced the compressive strength estimation equation by depth of the water. On the basis of the sea field test result, compressive strength estimation equation which was deduced by multiple regression analysis indicated highest accuracy compared to other equations, especially it will be more likely to be used in underwater because of the depth of water correction. In the future, if schmidt hammer and ultrasonic sensor which were invented as waterproofing are used with ROV (Remotely Operated Vehicle), it will be possible to make a diagnosis of high reliability for underwater concrete structures and set up a ubiquitous concept of NDT system.