• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2003년도 추계 학술논문발표회 논문집
• /
• pp.113-117
• /
• 2003

The reliability of machined fiber reinforced composites (FRC) in high strength applications and the safety in using these components are often critically dependent upon the quality of surface produced by machining since the surface layer may drastically affect the strength and chemical resistance of the material [1,2,3,4]. Current study will discuss the characterization of fiber pull-out in orthogonal cutting of a fiber-matrix composite materials. A sparsely distributed idealized model composite material, namely a glass reinforced polyester (GFRP) was used as workpiece. Analysis method employs a force sensor and the signals from the sensor are processed using AR time series model. The experimental correlation between the fiber pull-out and the AR coefficients is examined first and effects of fiber orientation, cutting parameters and tool geometry on the fiber pull-out are also discussed.

• 한국전산유체공학회지
• /
• 제8권4호
• /
• pp.41-49
• /
• 2003

This study presents a numerical model to analyze dynamic thermal behavior of a hot chuck designed for flip-chip bonders. The hot chuck of concern is a heater which has been specifically developed for accomplishing high-speed and ultra-precision soldering. The characteristic features are radiative heat source and the heating tool made of a material of high thermal diffusivity. A physical modeling has been conducted for the network of heat transport. A simplified finite volume model is deviced to simulate time-dependent thermal behavior of the heating tool on which soldering is achieved. The reliability of the proposed numerical model is verified experimentally. A series of numerical tests illustrate the usefulness of the numerical model in design analysis.

• E2M - 전기 전자와 첨단 소재
• /
• 제11권10호
• /
• pp.94-99
• /
• 1998

Suitable replacement materials for ultrathin SiO2 in deeply scaled MOSFETs such as lattice polarizable films, which have much higherpermittivities than SiO2, have bandgaps of only 3.0 to 4.0 eV. Due to these small bandgaps, the reliability of these films as a gate insulator is a serious concern. Ramped voltage, time dependent dielectric breakdown, and hot carrier effect measurements were done on 190 layers of TiO2 which were deposited through the metal-organic chemical vapor deposition of titanium tetrakis-isopropoxide (TTIP). Measurements of the high and low frequency capacitance indicate that virtually no interface state are created during constant current injection stress. The increase in leakage upon electrical stress suggests that uncharged, near-interface states may be created in the TiO2 film near the SiO2 interfacial layer that allow a tunneling current component at low bias.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.177-179
• /
• 1990

Recently, it is reported that the behaviour of PECVD under high electric field and current condition has a major effect on MNS device degradation. In this paper, we evaluated the breakdown and TDDB characteristics of Laser assisted PECVD SiN films which is introduced new deposited method. And also, long term insulator breakdown reliability is described by examing time dependent dielectric breakdown under positive voltage. Failure tines against electric field are examined and acceleration factors are obtained for each case. From these data, breakdown wearout limitation for Laser Assisted PECVD SiN film can be characterized.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집
• /
• pp.33-37
• /
• 2004

Photovoltaic energy and wind energy are highly dependent on the season, time and extremely intermittent energy sources. Because of these reasons, in view of the reliability the photovoltaic and the wind power generation system have many problems(energy conversion, energy storage, load control etc.) comparing with conventional power plant. In order to solve these existing problems, hybrid generation system composed of photovoltaic(500W) and wind power system(400W) was suggested But, hybrid generation system cannot always generate stable output due to the varying weather condition So, the auxiliary power compensation unit that uses elastic energy of spiral spring was added to hybrid generation system for the present study. It was partly confirmed that hybrid generation system was generated a stable outputs by spiral spring was continuously provided to load.

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.1-7
• /
• 2012

The transportation is almost dependent on a single fuel petroleum with transportation energy dilemma. Hybrid Electric Vehicle(HEV) technology holds more advantages on efficiency improvements for petroleum consumption at the transportation. And bearing is recognized as the important component of gearbox. Gearboxes for HEV transmission have been ensured the highest reliability over some years in withstanding high dynamic loads. At the same time, the demands of lightweight design and cost minimization are required by thought-out design, high-quality material, superior production quality and maintenance. In order to design a reliable and lightweight gearbox, it is necessary to analyze bearing rating life methods between standard and different bearing companies with calculation methods for modification factors. In this paper, the influence of life time of bearings will be pointed out. Bearing contact stress and load stress distribution of HEV gearbox are obtained and compared with Romaxdesigner and BearinX. And the unequal wear of the left bearing for the gearbox intermediate shaft is investigated between simulation and test.

• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.25-30
• /
• 2012

The transportation is almost dependent on a single fuel petroleum with transportation energy dilemma. Hybrid Electric Vehicle(HEV) technology holds more advantages on efficiency improvements for petroleum consumption at the transportation. And bearing is recognized as the important component of gearbox. Gearboxes for HEV transmission have been ensured the highest reliability over some years in withstanding high dynamic loads. At the same time, the demands of lightweight design and cost minimization are required by thought-out design, high-quality material, superior production quality and maintenance. In order to design a reliable and lightweight gearbox, it is necessary to analyze bearing rating life methods between standard and different bearing companies with calculation methods for modification factors. In this paper, the influence of life time of bearings will be pointed out. Bearing contact stress and load stress distribution of HEV gearbox are obtained and compared with Romaxdesigner and BearinX. And the unequal wear of the left bearing for the gearbox intermediate shaft is investigated between simulation and test.

• 농업과학연구
• /
• 제39권2호
• /
• pp.195-202
• /
• 2012

This study was examined the optimization of processing conditions for taste-assurance factors of boiled Korean native chicken (KNC) through response surface methodology. The effects of two independent variables, including heating time ($X_1$) and water volume ($X_2$), were investigated using central composite design. Hypoxanthine content, lipid oxidation, texture, and sensory results were chosen as dependent variable. Results showed high reliability on hypoxanthine and texture property in leg meat (not breast meat) of boiled KNC. Statistical modeling revealed that 3.5 folds of added water (v/w) based on chicken weight and 73.5 min of cooking time was the optimum for producing characteristic taste and textural properties from the leg meat of KNC.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.1037-1040
• /
• 2008

해양 환경에 노출된 구조물의 잔존수명을 예측하기 위해서는 부식 개시기까지의 염화물 침투와 콘크리트 피복 균열과 같은 콘크리트 구조물의 열화현상에 대하여 시간과 공간적 요소를 고려한 분석적 접근 방법의 개발이 필요하다. 이를 위하여 본 연구에서는 유한요소해석 기법을 이용하여 염해에 노출되어 있는 콘크리트 구조물의 생애주기를 시뮬레이션하는 것을 목표로 한다. 내구성 예측을 위한 환경적 변수와 재료의 불확실성을 고려하기 위하여 신뢰성에 기반한 잔존수명의 예측을 위한 유한요소해석 모델링에 Monte Carlo Simulation 기법을 도입하였다. 본 논문에서는 콘크리트 구조물의 신뢰성에 기반한 잔존 내구수명에 대한 일반적 개념과 염화물 이온 침투, 부식 생성물의 팽창, 피복 균열 등에 대한 유한요소 모델에 대해 설명하고, 마지막으로 예제를 통하여 염화물 이온의 집중, 부식 생성물의 팽창등이 콘크리트 구조물의 잔존수명에 미치는 영향에 대해 논의하였다.

• 대한교통학회지
• /
• 제21권3호
• /
• pp.85-96
• /
• 2003

휴대폰이나 카네비게이션 시스템과 같은 개인단말기에 의한 교통정보 제공 서비스의 시행을 위해서는 정보제공 서비스가 사회적 편익과 개인적 편익에 미치는 영향 분석이 선행되어야 한다. 이를 위해, 본 연구에서는 시뮬레이션을 활용하여 교통정보 제공 서비스가 도로 네트워크에 미치는 영향과 정보를 이용하는 운전자와 정보를 이용하지 않는 운전자에 대한 차이를 소요시간 분석, 소요시간 예측오차 분석, 그리고 정보의존도 분석 등을 통해 밝히고 있다. 소요시간 분석과 소요시간 예측오차 분석 결과에 의하면, 네트워크 내에 정보를 이용하는 운전자가 증가하면서 네트워크의 소요시간과 소요시간 예측오차는 감소하는 경향을 나타냈다. 또, 소요시간과 소요시간 예측오차에 있어서, 정보를 이용하지 않는 운전자에 대한 정보 이용 운전자의 상대적 편익은 1일 교통량 변동이 크고, 정보이용률이 낮은 상황에 한하여만 나타났다. 또, 정보의존도 분석 결과에 의하면, 도로 네트워크 내에 정보 이용 운전자들이 많아지면 운전자들은 정보에 더 많이 의존하게 되는 것으로 나타났다. 또, 혼잡한 교통상태에서는 정보 역시 정확도가 떨어지므로 정보의존도가 낮고, 교통량이 적기 때문에 소통원활한 경우는 정보의존도가 낮고, 반대로 교통량이 많지만, 도로 이용효율이 높아 생기는 소통원활의 경우에는 높은 정보의존도를 보이었다. 본 연구 결과로부터, 어느 정도의 정보이용률까지는 정보이용 운전자들이 증가하면, 네트워크는 도로 이용효율이 향상되어 소요시간 효율성과 신뢰성 등이 향상되고, 운전자의 소요시간 예측오차는 감소한다는 것을 알 수 있었다.