• Nuclear Engineering and Technology
• /
• v.31 no.3
• /
• pp.294-302
• /
• 1999

The influence of source term release parameters on offsite health effects was examined for the YGN 3&4 nuclear power plants. The release parameters considered in this study are release height, heat content, and release time. The effects of core inventory change as a function of fuel burnup was also examined. The health effects by the change of release parameters are early fatalities, cancer fatalities, and early fatality distance. The results showed that early fatalities and early fatality distance decrease as release height increases, although it does not have significant influence on cancer fatalities. The values of both early and late health effects decrease as heat content increases. As release time increases, health consequence shows maximum value in 2 hours of release time and then decreases rapidly. As fuel burnup increases, early fatalities decrease rapidly, while cancer fatalities increase rapidly. Both cases show little variation afterward. Early fatality distance is almost same in all fuel turnup history. The information obtained through this research is very useful in developing strategies for reducing offsite consequences when combined with the influence of weather conditions on offsite risks.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.2
• /
• pp.141-150
• /
• 2000

In order to genralize the vertical dispersion of plume at long distances on mesoscale over complex terrain dispersion coefficients data have been obtained systematically according to lapsed time after release by using a composite turbulence water tank that simulates convective boundary layer. Dispersion experiments have been carried out for various combined conditions of thermal turbulence intensity mechanical turbulence intensity and plume release height at slightly to moderately unstable conditions. Results of tracer dispersion experiments conducted using water tank camera and image processing system have been converted into atmospheric dispersion data through the application of similarity law. The equation $\sigma$z/Zi=aX/(b+c X2)0.5 where $\sigma$2; vertical dispersion coefficient zi : mixing height X : dimen-sionaless downwind distance was confirmed to be an appropriate and general equation for expressing $\sigma$2 variation with turbulence intensity and plume release height, The value of "a" was found to be principally affected by mechanical turbulence intensity and that of "b" by mechanical turbulence intensity and release height. It was confirmed that the magnitude of "c" varies with release height. Results of water tank experiments on the relationship of $\sigma$2 vs downwind distance x have been compared with actual atmospheric dispersion data such as CONDORS data and Bowne's nomogram Operating conditions of a composite turbulence water tank for simulating the field turbulence situations of CONDORS experiments and Bowne's $\sigma$2(x) nomogram for suburban area have also been investigated in terms of water temperature difference between convection water tank and bottom plate heating tank grid plate stroke mixing water depth length scale and velocity scale. Moreover the effect of mechanical turbulence intensity on vertical dispersion has been discussed in the light of release height and downwind distance. height and downwind distance.

• Korean Journal of Applied Biomechanics
• /
• v.29 no.2
• /
• pp.121-128
• /
• 2019

Objective: The aim of this study was to examine the relation between swing phase and airborne phase of Tkatchev motion which was successfully performed with following motion by excellent middle and high school athletes in horizontal bar. Method: The subjects for this study were 8 male middle and high school top athletes. After their Tkatchev motions were filmed by two digital highspeed camcorders setting in 90 frames/sec at the 44th National Gymnastics against Cities and Provinces, the % lapse time lapse time of each instant, inferred maximum force acting on horizontal bar, and other kinematical variables were calculated through DLT method. After the relations among the % lapse times of each instants of downswing-start, downswing-finish, whipswing-finish, release, peak-height, and lapse time of regrasp, the relation among maximum force acting on bar, % lapse time, peak height, and the relation between % lapse time and release height were examined, the biomechanical timing characteristics of Tkatchev motion were as follows. Results: Firstly, it was revealed that the whole lapse time was $1.62{\pm}.06s$ and the correlation between the % lapse time of downswing-start and % lapse time of release was .819. Secondly, it was revealed that the pattern of COG path was shifted forwardly and tilted 11 clockwise from origin. Thirdly, it was revealed that maximum force acting on bar was inferred in $2,283{\pm}425N$ ($4.7{\pm}.6BW$) and the correlation between maximum force and peak height was r = .893. Lastly, it was revealed that the horizontal and vertical component of body COG velocity was $-2.14{\pm}.29m/s$, $2.70{\pm}.43m/s$ respectively, release height was $.49{\pm}.12m$, and shoulder angle was $139{\pm}5deg$, and that the later the % lapse time of release, the higher the release height (r = .935). Conclusion: It is desired that the gymnastic athletes should delay the downswing-start near the horizontal plane on $2^{nd}$ quadrant because the later the % lapse time of downswing, the higher the release height. After all the higher release height could ensure the athletes to regrasp the bar safely, the athletes should exercise to make downswing-start delay.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.6
• /
• pp.29-39
• /
• 2006

The effect of parameters on the consequence of the flash fire accident by the release of heavy gas(in this study, xylene vapor) was analyzed. Simulation results showed that the distance with the lower flammable limit($X_{LFL}$) was increased with the increase of the release hole diameter. For the case of the elevated release, $X_{LFL}$ was increased with the increase of the wind speed and the release height, but $X_{LFL}$ was not affected by the wind speed for the release on the ground level. Therefore, the accident in the elevated release was more dangerous than the release on the ground level. In this condition, the release height had more effect on $X_{LFL}$ at the night time than the daytime and in the urban area than the rural area.

• The Journal of Korean Physical Therapy
• /
• v.18 no.6
• /
• pp.67-75
• /
• 2006

Purpose: Many kinds of musculoskeletal disease and symptom are caused by the longtime computer works. However, trapezius muscle tonus has not been established in regarding to keyboard height during typing. Therefore, this study is to evaluate the relationship between trapezius muscle tonus and the height of keyboard while typing, controling for the postures of neck, Lumbar, cervical vertebra. Methods: The experimental height of keyboard was set at elbow height, 3cm higher, 6cm higher, 9cm higher, than elbow. We studied trapezius tonus with the mean value for 2 minutes by EMG in 15 males and 15 females worker of hospital in seoul, who did not have a history of muscle disease, neurological signs, nerve damage. Results: In this experimental, as the height of the keyboard went up, the trapezius tonus significantly increased with shoulder abduction of brachium. Second, right and left trapezius tonus appeared similar while typing. Third, the best height that release the trapezius tonus the was as high as elbow and 3cm higher than elbow. Conclusion: With these above results, we suggest that the appropriate height of keyboard during typing to release the trapezius tonus most is the height of the elbow and 3cm higher than elbow. The study has important implications for focusing on the height of VDT worktable and complaining of a pain by oneself which are useful to establish a method of prevention of musculoskeletal disorder in work in the future.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.3
• /
• pp.149-163
• /
• 2004

This study analyzed kinematic variables about the cross step, the delivery and the release for women's javelin athletics recorded over 50m in the 2004 Busan International Athletics Competition. It was used the Kwon3D Motion Analysis Package Ver. 3.1 Program(Kwon, 2000) for analysing the kinematic variables about the distance, the velocity, and the angle, then we had the results as follows; 1 In the Cross step phase, the COG velocity was low because their step length was short. To keep the CM velocity from the approach to the last cross over step contact, the athletes have to keep the longer step length within about 130% of the athletics' height. 2. In the Delivery phase, the athletics' COG height was gradually lower, and the deceleration of the COG was going up. As the same in the cross step, Therefore the athletes have to increase the step length within about 100% of their height, in order to increasing the COG velocity. And it was shown they have to make small angle of the elbow as possible from the right foot contact to the left foot contact in order to being the big acceleration of the upperarm at the release phase. 3. In the release phase, it was shown to being low position of the release point as the COG was low and then the release velocity of the upperarm was low. Specially when the shoulder lean lateral angle is big at the release phase, it was shown they have a excessive release angle. And, when it was shown the high rotation angle of the shoulder, the shoulder was opened forward bigger than the trunk was opened forward. So the transmission of velocity from the proximal segments was a fast change.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.2
• /
• pp.131-140
• /
• 2012

This study was to investigate the relationship between the distance and projection factors, angle factors of javelin in women's javelin throwing. The data were collected in the 2011 National Sports Festivals for 11 players. Three-Dimensional motion analysis using a system of 4 video cameras at a sampling frequency of 60 fields/s was performed for this study. The factors of release conditions calculated using Matlab 2009a program. The statical analysis on the records(n=42) included mean and standard deviation of the mean(SD), Pearson's product moment correlation coefficient(SPSS Version 16.0 for Windows). There was a statistically significant positive relationship between the records and release velocity(r=.866, p<.01), height(r=.433, p<.01) and height rate(r=.340, p<.05). The attitude angle, release angle, and attack angle showed not a statistically significant relationship between the records. The medial-lateral tilt angle of javelin showed not a statistically significant relationship between the records, but the yaw angle of javelin(r=.549, p<.01) showed a statistically significant positive relationship between the records.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.3
• /
• pp.155-165
• /
• 1994

Some mucoadhesive polymers such as hydroxypropylcelluose (HPC) and carbopol-934 (CP) have been employed for the preparation of mucoadhesive polymeric systems, and their physical properties including mucoadhesion, swelling, and drug release were evaluated. A new simple experimental technique that can quantitatively measure the bioadhesive properties of various polymeric systems has been developed by the methods of detachment force test. As the polymeric systems, the discs of freeze-dried HPC/CP solid dispersions were prepared. The mucosa used in these tests were upper, middle, and lower parts of small intestine of male rats weighing $300{\sim}350\;g$. Detachment forces were increased as the mole fraction of CP increased in discs of HPC/CP solid dispersions. In the points of intestinal site dependence of mucoadhesion, the solid dispersions revealed non-specific mucoadhesion to the intestine. Swelling and drug release characteristics of mucoadhesive polymeric systems were studied extensively to find out the feasibility for the oral controlled delivery systems. Swelling ratio, expressed as the final height/initial height, has been determined in various pH buffer solutions. Hydrochlorothiazide (HCT) was employed as a model drug for release study. Apparent swelling and drug release rate constants, $K_s$ and $K_r$ respectively, were obtained from the square-root time plot of either swelling ratio or released amount of drug, particularly for the time periods before reaching the equilibrium. As a result, the swelling ratio of HPC/CP solid dispersions was increased as the weight percentage of CP increased. Similarly, the release of HCT from the solid dispersions was dependent on pH changes and CP contents, resulted in the slower release of HCT with the increases of pH and CP contents.

• Structural Engineering and Mechanics
• /
• v.71 no.2
• /
• pp.153-163
• /
• 2019

Longitudinal fracture behavior of non-linear elastic beam configurations is studied in terms of the strain energy release rate. It is assumed that the beams exhibit continuous material inhomogeneity along the width as well as along the height of the crosssection. The Ramberg-Osgood stress-strain relation is used for describing the non-linear mechanical behavior of the inhomogeneous material. A solution to strain energy release rate is derived that holds for inhomogeneous beams of arbitrary cross-section under combination of axial force and bending moments. Besides, the solution may be applied at any law of continuous distribution of the modulus of elasticity in the beam cross-section. The longitudinal crack may be located arbitrary along the beam height. The solution is used to investigate a longitudinal crack in a beam configuration of rectangular cross-section under four-point bending. The crack is located symmetrically with respect to the beam mid-span. It is assumed that the modulus of elasticity varies continuously according a cosine law in the beam cross-section. The longitudinal fracture behavior of the inhomogeneous beam is studied also by applying the J-integral approach for verification of the non-linear solution to the strain energy release rate derived in the present paper. Effects of material inhomogeneity, crack location along the beam height and non-linear mechanical behavior of the material on the longitudinal fracture behavior are evaluated. Thus, the solution derived in the present paper can be used in engineering design of inhomogeneous non-linear elastic structural members to assess the influence of various material and geometrical parameters on longitudinal fracture.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4715-4721
• /
• 2022

A comprehensive approach for modeling the pulse height spectra of gamma-ray detectors from passing radioactive cloud in a case of accident at NPP has been developed. It involves modeling the transport of radionuclides in the atmosphere using Lagrangian stochastic model, WRF meteorological processor with an ARW core and GFS data to obtain spatial distribution of radionuclides in the air at a given moment of time. Applying representation of the cloud as superposition of elementary sources of gamma radiation the pulse height spectra are calculated based on data on flux density from point isotropic sources and detector response function. The proposed approach allows us to obtain time-dependent spectra for any complex radionuclide composition of the release. The results of modeling the pulse height spectra of the scintillator detector NaI(Tl) Ø63×63 mm for a hypothetical severe accident at a NPP are presented.