• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1437-1439
• /
• 1999

This paper describes test method though low voltage power system implementation for high impedance fault relay test before its operation in real power system. Through this test, relay tested its function and algorithm. In this paper, we will provides test method using low voltage power system and its results.

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.4
• /
• pp.28-31
• /
• 2007

This paper describes the consideration of 154kV protective relaying systems for applying HTS(High Temperature Superconducting) power devices to Korean power system. We investigates firstly 154kV relay systems of Korean power system and then do a basic study on the relay systems in the power system with superconducting devices. For the more detailed result, the study using EMTDC relay system modeling will be done from the viewpoint of superconducting devices application in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.431-439
• /
• 2010

In this paper, multiple-relay cooperative communication network with multiple antennas is considered. Applying the soft-decision-and-forward protocol to this system, pairwise error probability(PEP) is derived and then symbol error rate(SER) is also calculated. However, in general, signals are transmitted through the orthogonal channel in the multiple-relay cooperative communication network for the prevention of interference, which is inefficient in terms of the throughput. For the improvement of throughput, the relay selection is considered, where the relay having the maximum instantaneous end-to-end signal-to-noise ratio is chosen. Performance of the system is analyzed in terms of PEP and SER. As the number of the relay increases, relay selection method outperforms the conventional multiple-relay transmission system where all relays participate in the second time slot.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5343-5364
• /
• 2016

Considering the tradeoff between energy consumption and outage behavior in buffer-aided relay selection, a novel energy-efficient buffer-aided optimal relay selection scheme with power adaptation and Inter-Relay Interference (IRI) cancellation is proposed. In the proposed scheme, energy consumption minimization is the objective with the consideration of relay buffer state, outage probability and relay power control, in order to eliminate IRI. The proposed scheme selects a pair of optimal relays from multiple candidate relays, denoted as optimal receive relay and optimal transmit relay respectively. Source-relay and relay-destination communications can be performed within a time-slot, which performs as Full-Duplex (FD) relaying. Markov chain model is applied to analyze the evolution of relay buffer states. System steady state outage probability and achievable diversity order are derived respectively. In addition, packet transmission delay and power reduction performance are investigated with a specific analysis. Numerical results show that the proposed scheme outperforms other relay selection schemes in terms of outage behavior with power adaptation and IRI cancellation in the same relay number and buffer size scenario. Compared with Buffer State relay selection method, the proposed scheme reduces transmission delay significantly with the same amount of relays. Average transmit power reduction can be implemented to relays with the increasing of relay number and buffer size, which realizes the tradeoff between energy-efficiency, outage behavior and delay performance in green cooperative communications.

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.75-81
• /
• 2009

The cellular system in the next generation decreases the range of transmission of a signal as well as increases the rate of transmission adapting the method of multi-hop relaying with the relay. However, the fact of decreasing the range of transmission with the method of multi-hop relaying means increasing interferential amount in the outer cell; therefore, the deployment of the relay can affect to the function of the cellular system. In this thesis, the deployment of the relay is determined for the maximum rate of transmission, based on the transmission power of the relay and the variation of interferential amount. The condition to determine the deployment of the relay is analyzed with the mathematical model; in addition, its performance is verified through the result of a simulation. Based on the analysis of this thesis, the established deployment and transmission power of the relay to minimize the average outage probability exist. Furthermore, the relay contributes to enlargement of capacity of cells, decreasing the average outage probability in the situation of less severe interference between cells with reuse of frequency. However, the relay should be restrained in use in the situation of severe interference between cells due to the fact that the outage probability of inter-cells can be increased.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.3
• /
• pp.509-515
• /
• 2017

In this paper, for a cooperative communication system with multiple relays, we consider a relay selection method by exploiting the trust degree information of relay nodes. In the cooperative communication system, we interpret the trust degree of relays as the probability that relay helps the communication between the transmitter and receiver. We first provide an expected achievable rate at the receiver by taking into account the both cases that the relay helps the transmission of transmitter and the relay does not help the transmission of transmitter according to its trust degree. For given trust degree information, we propose an efficient relay selection method to maximize the expected achievable rate at the receiver. For the various configurations, the simulation results confirm that the proposed relay selection method outperforms the conventional relay selection method, which does not consider the trust degree of relay nodes.

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.224-231
• /
• 2010

In this paper, we analyze the performance of the cooperative relay communication system which uses orthogonal frequency division multiplexing(OFDM) with hierarchical subcarrier modulation. In the cooperative relay communication system, data transmission is accomplished in two time slots. In the first time slot, the source broadcasts the signal to the relay and to the destination. The relay demodulates the received signal, remodulates and forwards it to the destination in the second time slot. The source uses hierarchical modulation for subcarriers to deal with the signal-to-noise power ratio (SNR) difference in the source-relay and source-destination links. The bit error rate (BER) of the relay transmission system with hierarchical modulation depends on the hierarchical modulation parameter. First, we derive the relationship between BER and the parameter, and find the optimal parameter giving the minimum BER through computer simulations. Then, we analyze the performance of the proposed cooperative relay communication system according to the relay location. From this results, we find optimal relay location to maximize the BER performance.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1846-1849
• /
• 1998

An optical magnetic filed sensor, YIG (Yittrium Iron Garnet), response rapidly, to the power-line currents to be measured. In response to Faraday effect, it shows wide-and-linear measurable range. This paper reports the development and implementation of an OOCR (Optoelectric OverCurrent Relay) using this sensor. This relay is free from environmental electro-magnetic noises and has excellent insulation characteristics inherently. By using this OOCR, we can reduce insulation cost of protective relaying systems and its maintenance cost, and can achieve high reliability of the system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.394-399
• /
• 2017

In Korean AC power railway substations, SCOTT winding transformers are under operation to have a single phase power supply together with a phase angle of $90^{\circ}$ on the secondary side of the main transformer. In the case of an internal fault of the transformer, the transformer protection relay should be cut off on the primary side, the transformer should be inoperative to the external fault of the transformer or to the normal train operation. Reducing the malfunction of the relay through an exact fault determination is very important for securing a stable power system and improving its reliability. The main transformers are protected using Buchholtz's relay and a differential relay as the internal fault detection devices, but there are some cases of the main transformer operation under the deactivation of this protection function due to a malfunction of the differential relay. In this paper, the characteristics of the SCOTT transformer and differential relay as well as the malfunctioning of the protection relays are presented. The modeling of the SCOTT transformer protection relay was accomplished by the power system analysis program and the Comtrade file from 'A substation', which was used as the input data for the fault wave, and the harmonics were analyzed to determine if the relay operates or not. In addition, an improvement plan for malfunctioning cases through wave form analysis is suggested.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.8 no.3
• /
• pp.1-14
• /
• 1971

A relay servo, one of the nonlinear sytsems, is inherently compact compared to a linear system for an equivalent control problem. The power element or actuator is not adjusted proportionally in accordance with an error signals but rather is switched abruptly between several discrete conditions. Usually switched conditions are off, full, forward or full reverse. The relay system is a particularly simple and compact one, but probably more effort has been expended on its analysis and design than on all other systems together. Early studies in the art were made by Goldfarb, austin, Oppelt and Kochenburger on the describing function method, which can be used as an approximate check on the stability of the system. The describing function method is based on the assumption that any periodic wave could be approximated as a fundamental one in wide ranges of practical applications. A relay servo system usually operates on a limit cycle condition as the loop gain increases. The stability analysis compensation or any improvement effort based on the describing function method sometimes may present considerable discrepancies on physically realized practical systems. An approach to exact periodic solutions of a relay servo system is much important for the analysis, design and system improvement. This paper dells with periodic solutions of a relay servo system on the basis of describing function and generalized chopper wave form which is composed of infinite number of harmonic series. Various ways of graphical representation were attempted to get periodic solutions, some of which have shown its validity in rapid approach to exact solutions and also in judgement of system behavior.