• 제목/요약/키워드: relay switching

검색결과 65건 처리시간 0.031초

Mobile-Based Relay Selection Schemes for Multi-Hop Cellular Networks

  • Zhang, Hao;Hong, Peilin;Xue, Kaiping
    • Journal of Communications and Networks
    • /
    • 제15권1호
    • /
    • pp.45-53
    • /
    • 2013
  • Multi-hop cellular networks (MCNs), which reduce the transmit power, mitigate the inter-cell interference, and improve the system performance, have been widely studied nowadays. The relay selection scheme is a key technique that achieves these advantages, and inappropriate relay selection causes frequent relay switchings, which deteriorates the overall performance. In this study, we analyze the conditions for relay switching in MCNs and obtain the expressions for the relay switching rate and relay activation time. Two mobile-based relay selection schemes are proposed on the basis of this analysis. These schemes select the relay node with the longest relay activation time and minimal relay switching rate through mobility prediction of the mobile node requiring relay and available relay nodes. We compare the system performances via simulation and analyze the impact of various parameters on the system performance. The results show that the two proposed schemes can obtain a lower relay switching rate and longer relay activation time when there is no reduction in the system throughput as compared with the existing schemes.

하이브리드 자동차용 계전기 모듈의 소음저감에 관한 실험적 연구 (An Experimental Study on the Noise Reduction Method of HEV-relay Module)

  • 서재용;김원진
    • 한국정밀공학회지
    • /
    • 제27권10호
    • /
    • pp.77-83
    • /
    • 2010
  • In this paper, the noise of HEV(hybrid electric vehicle)-relay module during the turn-on and turnoff switching is experimentally analyzed and an effective method is proposed to reduce the impact noise. First, enclosure methods of 100A relay part with urethane and silicon are tested to find out a better material to isolate the noise. This result shows that the urethane is a better for the noise isolation of relay, so the relays enclosed by urethane are installed in the relay module. Second, the noise of HEV-relay module is analyzed experimentally to identify the noise generation mechanism. From this result, it is found that the vibration transmitted to battery pack through bolt generates the structural borne noise with the frequency band of 200~2000 Hz, which is more serious when the switch is turned off. Finally, the direction of switching and the joint structure are modified in order to isolate the vibration transmitted to battery back. Both methods are very effective to reduce the switching noise.

TSR 릴레이를 활용한 무선 전력 Backscatter 통신 성능 분석 (Performance Analysis of Wireless-powered Backscatter Communication with TSR-based Relay)

  • 박시우;박재현;황규성
    • 한국멀티미디어학회논문지
    • /
    • 제23권9호
    • /
    • pp.1164-1170
    • /
    • 2020
  • In this paper, we consider the wireless-powered backscatter communication which consists of a power beacon, a source, a relay, and a destination. For the proposed wireless-powered backscatter communication, the source transmits its signals to both the relay and the destination via a backscattering channel and the relay which has a rechargeable battery performs an energy harvesting as well as an information forwarding based on the time switching relay (TSR) protocol. Based on the decode-and-forward (DF) relay transmission, we investigate performances of the proposed system in terms of outage probability and transmission rate in which the exact performance analysis of outage probability is given. Finally, some numerical examples are given to verify our provided analytical results for different system conditions.

HEV 계전기의 소음분산 저감에 관한 실험적 연구 (Experimental Study on the Reduction of Noise Dispersion for HEV Relay)

  • 김원진
    • 한국생산제조학회지
    • /
    • 제22권2호
    • /
    • pp.324-330
    • /
    • 2013
  • The dispersion of acoustic noise during the turn-on and turn-off switching of HEV(hybrid electric vehicle) relay was experimentally analyzed to identify the reason for the dispersion of noise level. An effective method was proposed to reduce the dispersion of noise level. First, a method to wrap the side of moving core with a tape was adopted to reduce the transverse vibration. It enabled the moving core to make a consistent motion and reduce the dispersion of noise level from switching operation of relay. Second, the dispersion of noise level from vibration transmission of parts such as the outer frame and yoke caulking part of relay were tested to find out main sources. From this result, it was identified that the yoke caulking part made inconsistent transient vibration and noise dispersion.

무선 인지 중계 네트워크에서 이차 사용자의 중계기가 에너지 하베스팅을 사용할 때 처리량을 최대화하기 위한 최적의 하베스팅 시간 분배 방법 (Optimal Harvesting Time Allocation Scheme for Maximizing Throughput in Wireless Cognitive Relay Network with Secondary Energy Harvesting Relay)

  • 임경래;이재홍
    • 방송공학회논문지
    • /
    • 제20권2호
    • /
    • pp.215-223
    • /
    • 2015
  • 에너지 하베스팅 기술은 에너지가 제약적인 환경에 있는 통신 기기가 정보 송신에 필요한 에너지를 얻는 충전 기술이다. 최근에 제안된 에너지 하베스팅 기술은 주변의 무선 고주파 신호로부터 에너지를 저장한다. 대표적으로 시간 전환 (time switching, TS) 과 전력 분할 (power splitting, PS) 의 기술이 있다. 본 논문은 무선 인지 중계 네트워크에서 이차 사용자의 중계기가 정보 전송을 위해 에너지 하베스팅 기술을 사용할 때 최적의 에너지 하베스팅 시간을 분배하는 방법을 제안한다. 이차 사용자의 중계기는 시간 전환 기술을 사용하여 이차 사용자의 송신기에서 보낸 신호로부터 정보와 에너지를 전달받는다. 이차 사용자의 순시적 처리량을 최대화 하기 위하여 이차 사용자 중계기의 하베스팅 시간을 최적화 한다. 컴퓨터 시뮬레이션을 통해 고정된 하베스팅 시간을 사용하는 방식보다 본 논문에서 제안한 방법으로 구한 최적의 하베스팅 시간을 사용하는 것이 더 큰 순시적 처리량을 얻음을 확인하였다.

양방향 중계채널에서 최대 전송률을 위한 동적 전송 기법 (Active Transmission Scheme to Achieve Maximum Throughput Over Two-way Relay Channel)

  • 박지환;공형윤
    • 한국인터넷방송통신학회논문지
    • /
    • 제9권5호
    • /
    • pp.31-37
    • /
    • 2009
  • 양방향 중계 채널에서는 중계기가 복호 후 재전송 혹은 증폭 후 재전송 프로토콜을 기반으로 두 사용자에게 네트워크 부호화된 신호를 전송한다. 이러한 양방향 중계 채널 시스템에서 신호 대 잡음비(SNR)가 낮은 환경에서는 복호 후 재전송 프로토콜이 최대 전송량을 가지고, 신호 대 잡음비가 높은 환경에서는 증폭 후 재전송 프로토콜이 최대 전송량을 가진다. 따라서 본 논문에서는 양방향 중계 채널에서 중계기가 수신한 신호 대 잡음비에 따라 증폭 후 재전송(Amplify-and-Forward, AF) 혹은 복호 후 재전송(Decode-and-Forward, DF)프로토콜을 결정하는 능동적인 전송 기법을 제안하였다. 전송 기법이 스위칭(switching)되는 최적의 임계값을 계산하였고, 제안하는 기법이 기존의 양방향 중계 채널에서의 전송 기법보다 우수한 전송량을 보임을 수식적인 결과를 통해 확인하였다.

  • PDF

Resilient Routing Overlay Network Construction with Super-Relay Nodes

  • Tian, Shengwen;Liao, Jianxin;Li, Tonghong;Wang, Jingyu;Cui, Guanghai
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제11권4호
    • /
    • pp.1911-1930
    • /
    • 2017
  • Overlay routing has emerged as a promising approach to improve reliability and efficiency of the Internet. The key to overlay routing is the placement and maintenance of the overlay infrastructure, especially, the selection and placement of key relay nodes. Spurred by the observation that a few relay nodes with high betweenness centrality can provide more optimal routes for a large number of node pairs, we propose a resilient routing overlay network construction method by introducing Super-Relay nodes. In detail, we present the K-Minimum Spanning Tree with Super-Relay nodes algorithm (SR-KMST), in which we focus on the selection and connection of Super-Relay nodes to optimize the routing quality in a resilient and scalable manner. For the simultaneous path failures between the default physical path and the overlay backup path, we also address the selection of recovery path. The objective is to select a proper one-hop recovery path with minimum cost in path probing and measurement. Simulations based on a real ISP network and a synthetic Internet topology show that our approach can provide high-quality overlay routing service, while achieving good robustness.

기업망 원격접속을 위한 프레임 릴레이 다이얼-업 서비스 구현에 관한 연구 (A Study on the Frame Relay Dial-up Service for Remote Access to Enterprise Networks)

  • 김영철;주기호
    • 공학논문집
    • /
    • 제3권1호
    • /
    • pp.139-146
    • /
    • 1998
  • 프레임 릴레이는 다양한 네트워크를 연결하기 위하여 사용되는 고속광역네트워크 기술이다. 패킷교환방식과 회선교환방식의 장점을 결합함으로써, 프레임 릴레이는 오늘날 기업의 다양한 업무환경에 적합한 고성능/고신뢰도의 통신 서비스를 제공한다. 본 논문에서는 프레임 릴레이기술의 기본개념 및 특징을 정리하고, 표준화현황을 고찰하였으며, 국내의 프레임 릴레이 산업 및 서비스 현황을 분석하였다. 또한, 프레임 릴레이를 이용한 기업망 원격접속 다이얼-업 서비스를 위한 시험망을 구성하여, 프레임 릴레이 다이얼-업 서비스의 기능 및 비용효과를 분석하였다.

  • PDF

Cooperative Nano Communication in the THz Gap Frequency Range using Wireless Power Transfer

  • Samarasekera, A. Chaminda J.;Shin, Hyundong
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제13권10호
    • /
    • pp.5035-5057
    • /
    • 2019
  • Advancements in nanotechnology and novel nano materials in the past decade have provided a set of tools that can be used to design and manufacture integrated nano devices, which are capable of performing sensing, computing, data storing and actuation. In this paper, we have proposed cooperative nano communication using Power Switching Relay (PSR) Wireless Power Transfer (WPT) protocol and Time Switching Relay (TSR) WPT protocol over independent identically distributed (i.i.d.) Rayleigh fading channels in the Terahertz (THz) Gap frequency band to increase the range of transmission. Outage Probability (OP) performances for the proposed cooperative nano communication networks have been evaluated for the following scenarios: A) A single decode-and-forward (DF) relay for PSR protocol and TSR protocol, B) DF multi-relay network with best relay selection (BRS) for PSR protocol and TSR protocol, and C) DF multi-relay network with multiple DF hops with BRS for PSR protocol and TSR protocol. The results have shown that the transmission distance can be improved significantly by employing DF relays with WPT. They have also shown that by increasing the number of hops in a relay the OP performance is only marginally degraded. The analytical results have been verified by Monte-Carlo simulations.

8 Antenna Polar Switching Up-Down Relay Networks

  • Li, Jun;Lee, Moon-Ho;Yan, Yier;Peng, Bu Shi;Hwang, Gun-Joon
    • Journal of electromagnetic engineering and science
    • /
    • 제11권4호
    • /
    • pp.239-249
    • /
    • 2011
  • In this paper, we propose a reliable $8{\times}8$ up-down switching polar relay code based on 3GPP LTE standard, motivated by 3GPP LTE down link, which is 30 bps/Hz for $8{\times}8$ MIMO antennas, and by Arikan's channel polarization for the frequency selective fading (FSF) channels with the generator matrix $Q_8$. In this scheme, a polar encoder and OFDM modulator are implemented sequentially at both the source node and relay nodes, the time reversion and complex conjugation operations are separately implemented at each relay node, and the successive interference cancellation (SIC) decoder, together with the cyclic prefix (CP) removal, is performed at the destination node. Use of the scheme shows that decoding at the relay without any delay is not required, which results in a lower complexity. The numerical result shows that the system coded by polar codes has better performance than currently used designs.