• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.10-11
• /
• 2006

The fault location is obtained from the distance relay that detects the fault of the transmission line. In this time, transmission line crews track down the fault location and the reasons. However, because of having error at the fault location of the distance relay, there is a discordance between real and obtained fault location. As this reason, the inspection time for finding fault location can be longer. In this paper, we proposed the statistical (regression) analysis method based on each type of relay's the historical fault location data and the real fault distance data to improve the problems. With finding the regression equation based on the regression analysis, and putting the relay fault location into that equation, the real fault distance is calculated. As a result of the Prediction fault location, the inspection time of transmission line can be reduced.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권9호
• /
• pp.3412-3431
• /
• 2015

This paper considers the effect of co-channel interference on hybrid satellite-terrestrial relay network. In particular, we investigate the problem of amplify-and-forward (AF) relaying in hybrid satellite-terrestrial link, where the relay is interfered by multiple co-channel interferers. The direct link between satellite and terrestrial destination is not available due to masking by surroundings. The destination node can only receive signals from satellite with the assistance of a relay node situated at ground. The satellite-relay link is assumed to follow the shadowed Rice fading, while the channels of interferer-relay and relay-destination links experience Nakagami-m fading. For the considered AF relaying scheme, we first derive the analytical expression for the moment generating function (MGF) of the output signal-to-interference-plus-noise ratio (SINR). Then, we use the obtained MGF to derive the average symbol error rate (SER) of the considered scenario for M-ary phase shift keying (M-PSK) constellation under these generalized fading channels.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.533-540
• /
• 2017

Distance relay identifies the type and location of fault by measuring the transmission line impedance. However any other factors that cause miss calculating the measured impedance, makes the relay detect the fault in incorrect location or do not detect the fault at all. One of the important factors which directly changes the measured impedance by the relay is series capacitive compensation (SCC). Another factor that changes the calculated impedance by distance relay is fault resistance. This paper provides a method based on the combination of distance and differential protection. At first, faulty transmission line is detected according to the current data of buses. After that the fault location is calculated using the proposed algorithm on the transmission line. This algorithm is based on active power calculation of the buses. Fault resistance is calculated from the active powers and its effect will be deducted from calculated impedance by the algorithm. This method measures the voltage across SCC by phasor measurement units (PMUs) and transmits them to the relay location via communication channels. The transmitted signals are utilized to modify the voltage signal which is measured by the relay. Different operating modes of SCC and as well as different faults such as phase-to-phase and phase-to-ground faults are examined by simulations.

• 한국전자통신학회논문지
• /
• 제10권6호
• /
• pp.671-676
• /
• 2015

협력네트워크는 중계기를 이용하여 데이터를 전송함으로서 음영지역을 해소하고 가상의 다중입출력 구성을 통해 통신성능을 향상시킬 수 있다. 본 논문에서는 송신기와 중계기 사이에서는 동기변조 방식을 이용하고 중계기와 수신기 사이에서는 차등변조 방식을 이용하는 부분차등변조 방식을 적용한 협력네트워크의 성능을 중계기의 위치에 따라 분석한다. 성능분석은 송신기와 수신기사이의 직접파가 존재하는 시스템과 존재하지 않는 시스템 두 가지를 고려하는데, 직접파는 차등변조 방식을 적용한다. 또한 전체시스템이 차등변조 방식을 이용했을 경우에 중계기 위치에 따른 성능을 부분차등변조 방식과 비교한다. 시스템의 성능은 송신기와 수신기 사이의 심벌오류율을 이용한다.

• 한국전자통신학회논문지
• /
• 제15권3호
• /
• pp.445-450
• /
• 2020

협력 네트워크는 전송기에서 송신기로 신호를 전송할 때 여러 개의 중계기를 통해 신호를 전송함으로써 통신성능을 향상시키고 전송용량을 증가시키는 장점을 제공한다. 본 논문에서는 송신기와 중계기 사이에서는 일반적인 이진변조방식을 이용하여 신호를 전송하고 중계기와 수신기 사이에서는 차등 공간 시간 코드 방식을 적용한 신호전송 시스템을 고려한다. 먼저 송신기와 중계기 사이에서 동기방식과 차등변조 방식을 적용했을 때의 성능을 분석한다. 변조방식 및 중계기의 개수를 고려한 다양한 중계기 위치에서의 성능 또한 비교한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권12호
• /
• pp.3275-3295
• /
• 2012

In this paper, we analyze the performance of an amplify-and-forward (AF) two-way relaying system, where two sources exchange information via the aid of an intermediate relay that is selected among multiple relays according to max-min criterion. We consider a practical scenario, where one source-relay link undergoes Rician fading, and the other source-relay link is subject to Rayleigh fading. To be specific, we derive a tight lower bound for the outage probability. From this lower bound, the asymptotic outage probability and average symbol error rate (SER) expressions are derived to gain insight into the system performance at high signal-to-noise ratio (SNR) region. Furthermore, we investigate the optimal power allocation (PA) with fixed relay location (RL), optimal RL with fixed PA and joint optimization of PA and RL to minimize the outage probability and average SER. The analytical expressions are verified through Monte Carlo simulations, where the positive impact of Rician factor on the system performance is also illustrated. Simulation results also validate the effectiveness of the proposed PA and relay positioning schemes.

• Journal of Communications and Networks
• /
• 제13권3호
• /
• pp.250-256
• /
• 2011

A two-way relaying (TWR) system is analyzed, where two source terminals with unequal numbers of antennas exchange data via an amplify-and-forward relay terminal with a single antenna. In the system considered herein, the link quality between the sources and relay can generally be asymmetric due to the nonidentical antenna configuration, power allocation, and relay location. In such a general setup, accurate bounds on the average sum rate (ASR) are derived when beamforming or orthogonal space time block coding is employed at the sources. We show that the proposed bounds are almost indistinguishable from the exact ASR under various system configurations. It is also observed that the ASR performance of the TWR system with unequal numbers of source antennas is more sensitive to the relay location than to the power allocation.

• 한국통신학회논문지
• /
• 제34권10A호
• /
• pp.746-751
• /
• 2009

본 논문에서는 부분 중계기 협력 다중화 기술에서 중계기의 위치에 따른 최적의 시스템 용량을 얻기 위한 동적 최적 시간 할당 기법을 제안하였다. 제안된 기법은 중계기 시스템의 전송 조건식을 추가함으로써 중계기의 유동적인 위치에 따라 최대의 시스템 용량을 가지도록 각 시간 구간의 길이를 최적화하였다. 전산 모의실험을 통해 균일하게 고정된 시간 할당을 가지는 기존의 부분 중계기 협력 다중화 기술에 비해 향상된 시스템 용량을 얻을 수 있었다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제1권2호
• /
• pp.117-124
• /
• 2012

A client collaboration (CC) system is proposed for a user relay system. The proposed scheme focuses on the management of transmit power and leakage interference. In the proposed CC system, edge users transmit signals to the masters considered as user relays. The masters relay the signals of the edge users to the base station using the resource blocks (RBs) that are assigned to the edge users. The leakage interference and power consumption were analyzed in the CC system. In addition, an optimal master location problem was formulated based on the signal-to-leakage-plus-noise ratio (SLNR). Because the optimal master location problem is quite complex, a sub-optimal master location problem was proposed and a closed-form sub-optimal master location was obtained. The edge users generate smaller leakage interference and power consumption in the proposed CC system compared to the system without the CC. The numerical results showed that the edge users generate smaller leakage interference and power consumption in the proposed CC system compared to the system without the CC, and the average throughput increases.

• 한국전자통신학회논문지
• /
• 제15권6호
• /
• pp.1131-1136
• /
• 2020

협력 네트워크는 중계기를 이용하여 신호를 전송하고, 수신기에서는 여러 중계기를 통해서 수신된 신호를 결합하여 복조함으로써 통신성능을 향상시킬 수 있다. 본 논문에서는 송신기-중계기 사이에서는 일반적인 변조 방식을 사용하고 중계기-수신기 사이에서는 공간 시간 코드 방식을 적용하는 협력 네트워크 시스템을 가정하여, 자원 할당에 따른 효과를 분석한다. 일반적인 변조 방식은 동기 변조 방식과 차등 변조 방식 두 가지를 고려하고 공간 시간 코드 방식은 차등 변조 방식을 적용한다. 자원 할당은 중계기의 위치와 전송에너지를 고려하며 중계기의 개수에 따른 성능 또한 분석한다.