• 한국터널지하공간학회 논문집
• /
• 제7권4호
• /
• pp.343-352
• /
• 2005

본 연구에서는 기존의 암반 이완하중 산정 방법을 비교 분석하고, 보다 정확한 2-arch 터널 라이닝 설계를 위해 굴착으로 인해 발생하는 터널 주변의 이완영역을 보다 체계적으로 산정하는 방법을 제시하고자 하였다. 이를 위해, 터널 굴착 후 국부 안전율이 재분포된 응력으로부터 계산되었으며, 국부 안전율이 2.0 또는 3.0에 해당하는 영역을 이완영역으로 가정하여 이완하중고가 산정되었다. 본 연구에서 제시된 방법은 터널의 형상 및 지반조건에 영향을 받지 않고 이완하중고를 구할 수 있는 방법으로, 국부안전율이라는 비교적 명확한 기준에 의해 이완하중고가 산정되기 때문에, 콘크리트 라이닝 설계 시 설계자의 주관에 따라 결정되는 단점을 극복할 수 있을 것으로 판단된다.

• 터널과지하공간
• /
• 제8권2호
• /
• pp.87-95
• /
• 1998

Field instrumentation and numerical analysis by the finite difference method were applied to estimate the relaxed zone in a subway tunnel of shallow depth in soft rock, excavated by NATM. The convergence and ground displacement can be used to estimate the deformation behavior and the relaxed zone. Parameters for the several models previously suggested were measured using regression analysis techniques adopting a function of time and the face advance. The estimated relaxed zone by the MPBX and FDM analysis were 1.5~3.0 m and 1.5~2.0 m, respectively. It was concluded that the visco-elastic model and the time-dependent elasto-plastic model correlate very well ($r^2$>0.9) with results of the numerical analyses.

• 한국터널지하공간학회 논문집
• /
• 제11권2호
• /
• pp.141-150
• /
• 2009

불연속면이 발달한 암반 내에서 해저터널을 시공할 경우 절리 내의 지하수 흐름이 터널 거동에 커다란 영향을 마치므로 안정성 평가 시 수리-역학적 연계해석이 필요하다. 실무에서는 일반적으로 암반이완하중을 고려하여 터널의 콘크리트 라이닝을 설계한다. 연속체 해석 시 잠재적 이완영역을 터널 주변의 국부안전율 분포를 이용하여 수치해석에 의해 산정하는 방법이 제안된 바 있다. 그러나 절리가 발달한 암반의 경우는 절리의 거동이 터널 전제 거동에 큰 영향을 미친다. 따라서 본 연구에서는 불연속 암반 내에 터널 굴착으로 인해 발생하는 잠재적 이완영역을 산정하는 방법을 제안하고 민감도 분석 및 연속제 해석 결과와 비교를 통해 제안된 방법의 타당성을 검증하였다.

• 산업기술연구
• /
• 제23권A호
• /
• pp.69-81
• /
• 2003

Numerical analysis is important for the design, construction and maintenance of large caverns. The rock mass contains generally discontinuities such as faults, joints and fissures. The mechanical behavior and geometric characteristics of these discontinuities would have a significant impact on the stability of the caverns. In this research the Distinct Element Method(DEM) was used to analyze the structural stability of the large cavern. The Barton-Bandis Joint Model (B-B J.M) was used as a constitutive model for the joint. In addition, two different cases 1) analysis with a support system and 2) analysis with no support system, were analyzed to optimize a support system and to investigate reinforcing effects of a support system. The most significant parameters of in-situ stress, JRC of in-situ natural joints, and spatial distribution characteristics of discontinuities were acquired through field investigation. Displacement (horizontal, joint shear), maximum joint opening, maximum and minimum principal stresses, range of relaxed zone, rockbolt axial forces and shotcrete stresses were calculated at each excavation stage. As a result of analysis the calculated values proved to be under the allowable value Rockbolts also proved to be an efficient support measure to control joint shear displacement which had significant effects on extending the relaxed zone. As a consequence, the structural stability of the cavern was assured with an appropriate support system.

• 한국건축시공학회지
• /
• 제23권3호
• /
• pp.315-326
• /
• 2023

The design principles and implementation of rebar lap splice in architectural structures are governed by building regulations. Nevertheless, the minimization of rebar-cutting waste (RCW) is often impeded by the mandatory requirements pertaining to the rebar lapping zone as prescribed in design codes. In real-world construction scenarios, compliance with these rules often falls short due to hurdles concerning productivity, quality, safety, time, and cost. This discrepancy between code stipulations and on-the-ground construction practices necessitates an academic exploration. The goal of this research was to delve into the effect of rebar lap splice placement on the robustness and constructability of building edifices. The study initially took on a review of the computation of rebar lapping length and the rules revolving around the lapping zone. Following this, a structural robustness and constructability examination was undertaken, focusing on adherence to the lap splice zone. The interpretations and deductions of the research led to the following insights: (1) the efficacy of rebar lap splice is not solely contingent on the moment, and (2) the implementation of rebar lap splice beyond the specified zone can match the structural integrity and robustness of those confined within the designated area. As a result, the constraints on the rebar lapping zone ought to be revisited and possibly relaxed. The conclusions drawn from this research are anticipated to reconcile the disconnect between building codes and practical construction conditions, furnishing invaluable academic substantiation to further the endeavor of achieving near-zero RCW.

• 한국터널지하공간학회 논문집
• /
• 제14권3호
• /
• pp.231-246
• /
• 2012

최근 터널 건설은 종종 연약대층을 인접하여 계획하게 된다. 이러한 경우 터널 굴착은 안정화되어 있던 지반을 이완시키고 따라서 터널의 안정성에 문제를 일으킬 수 있다. 안정성에 문제를 일으킬 수 있는 주요 영향인자들을 보면 연약대층이 지표면과 이루는 각도, 연약대층과 터널의 이격거리 등을 들 수 있다. 본 연구에서는 연약대층을 인접하여 건설되는 터널의 굴착과정에서 발생하는 변위량과 균열발생 양상을 조사함으로써, 연약대층이 지표면과 이루는 각도 및 연약대층과 터널의 이격거리가 터널의 역학적 거동에 미치는 영향을 조사하였다. 연약대층이 지표면과 이루는 각도 및 연약대층과 터널의 이격거리를 변화시켜 가면서 균질한 재료를 가지고 실내 축소 모형실험을 수행하고 이를 분석하였다. 실험결과, 연약대층이 지표면과 이루는 각도가 수평에서 수직으로 변화함에 따라 터널 주변의 변위 발생량이 증가하였다. 연약대층과 터널의 이격거리가 증가함에 따라 터널 주변의 변위 발생량이 감소하였고, 특정 이격거리 이상에서 안정화되었다. 이러한 발견들은 기존의 연구결과들을 정량적으로 검증하고 확장하는 것이라 판단된다. 최종적으로 연약대층이 지표면과 이루는 각도 변화에 따른 연약대층과 터널의 적정 이격거리를 정의하였다. 이러한 기초적인 연구는 연약대층을 인접하여 신설되는 터널 설계에 보다 합리적인 제안을 할 수 있을 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제24권5호
• /
• pp.479-490
• /
• 2021

Pre-drainage of groundwater in the roof aquifer by boreholes is the main method for prevention of roof water disaster, and the drop in the water level during the drainage leads to the variation of the local stress in the overlying strata. Based on a multitude of boreholes for groundwater drainage from aquifer above the 1303 mining face of Longyun Coal Mine, theoretical analysis and numerical simulation are used to investigate the local stress variation in the process of borehole drainage. The results show that due to the drop in the water level of the roof aquifer during the drainage, the stress around the borehole gradually evolved. From the center of the borehole to the outside, a stress-relaxed zone, a stress-elevated zone, and a stress-recovered zone are sequentially formed. Along with the expansion of drainage influence, the stress peak in the stress-elevated zone also moves to the outside. When the radius of influence develops to the maximum, the stress peak position no longer moves outward. When the coal mining face advances to the drainage influence range, the abutment pressure in front of the mining face is superimposed with the high local stress around the borehole, which increases the risk of stress concentration. The present study provides a reference for the stress concentration caused by borehole drainage, which can be potentially utilized in the optimal arrangement of drainage boreholes in underground mining.

• 터널과지하공간
• /
• 제1권2호
• /
• pp.204-217
• /
• 1991

In this study, the elastic modulus and the initial stresses of the rock were calculated through back analysis of in-situ displacements measured during excavation of the underground caverns. Results from back analysis were employed to determine the redistributed stresses the displacements and relaxed zone in the rock around the caverns, which supplement the geological characterization results. To verify the reliability of the back analysis program the elastic modulus and the initial stresses were obtained from inputting the displacements calculated by FEM. These were compared with the assumed normalized stresses in FEM and were in a reasonable agreement with an error of more or less than 3%.

• 조명전기설비학회논문지
• /
• 제24권9호
• /
• pp.49-55
• /
• 2010

Many electric poles in the softground have been collapsed due to external load. In this study, 10 types of tests were performed with variation of location, numbers and depths of anchor blocks as well as depth of poles to find stresses acting on concrete electric poles. The stresses of concrete poles are relaxed at 600~700[kg] of tensile load, and stresses are concentrated at top of pole, and spread to lower part of pole. In the concrete pole collapse test, tensile load at failure was approximately 1,400[kg], which is twice of design load. As passive zone in the soil increases, the stresses acting on concrete pole are concentrated at lower part of pole based on moment arm earth pressure distribution.

• 대한전기학회논문지
• /
• 제37권10호
• /
• pp.727-732
• /
• 1988

In this paper, a parameter estimation method of linear systems with bounded output disturbances is studied. The bound of the disturbances is assumed to known Weighting factors are proposed to modify LS(Least Square) algorithm in the parameter estimation method. The conditions of weighting factors are given so that the estimation method has good convergence properties. This condition is more relaxed form than other known conditions. The compensation term in the estimation equations is represented by a function of the output prediction error and this function should lie in a specified region on x-y plane to satisfy these conditions of weighting factors. A set of weighting factor is selected and an algorithm is proposed using this set of weighting factor. The proposed algorithm is compared with another existing algorithm by simulation and its performance in parameter estimation id discussed.