• 한국측량학회지
• /
• 제28권3호
• /
• pp.369-375
• /
• 2010

다각사진은 3차원 공간정보의 시각화 뿐 아니라 측정 목적으로도 사용되므로 카메라 시스템에 대한 캘리브레이션이 요구된다. 다각사진 카메라 시스템을 구성하는 각 카메라는 홀더에 장착되어 상대적인 자세 및 위치가 고정된다. 따라서 투영중심점 위치와 자세각은 중앙에 장착된 연직사진에 대해서 적용하고 나머지 4 대의 경사사진용 카메라에 대한 투영중심점 위치 및 자세각은 연직사진에 대한 상대적인 값으로부터 계산될 수 있다. 이에 본 연구에서는 다각사진 카메라 시스템에 의해 실제 촬영된 다각사진을 이용하여 항공삼각측량을 실시 한 후 얻어진 다각사진의 외부표정요소로부터 연직사진을 기준으로 경사사진의 상대적 자세각과 투영중심점의 상대적 위치에 대해 조사 분석하였다. 연구결과 연직사진에 대한 경사사진의 투영중심점 위치는 표준편차가 크게 나타났으며 자세각에 대해서는 경사방향에 관계없이 연직사진을 고정하고 경사사진만 조정할 때 그 표준편차가 더 작게 나타났다. 또한 전체 외부표정요소를 구할 경우보다 자세각만 구할 경우 전반적으로 표준편차가 작으며 안정적인 것을 알 수 있었다.

• 천문학회지
• /
• 제51권4호
• /
• pp.111-117
• /
• 2018

A numerical method is proposed to calculate the response of detectors measuring particle energies from incident isotropic fluxes of electrons and positive ions. The isotropic flux is generated by injecting particles moving radially inward on a hypothetical, spherical surface encompassing the detectors. A geometric projection of the field-of-view from the detectors onto the spherical surface allows for the identification of initial positions and momenta corresponding to the clear field-of-view of the detectors. The contamination of detector responses by particles penetrating through, or scattering off, the structure is also similarly identified by tracing the initial positions and momenta of the detected particles. The relative contribution from the contaminating particles is calculated using GEANT4 to obtain the geometric factor of the instrument as a function of the energy. This calculation clearly shows that the geometric factor is a strong function of incident particle energies. The current investigation provides a simple and decisive method to analyze the instrument geometric factor, which is a complicated function of contributions from the anticipated field-of-view particles, together with penetrating or scattered particles.

• 아태비즈니스연구
• /
• 제11권3호
• /
• pp.21-46
• /
• 2020

Purpose - This study aims to find if the introduction of project finance perspective leads to any modification to the view of PM industry on CSFs of PPP and their relative importance rank. Design/methodology/approach - Through literature reviews, this study came up with a set of CSFs reflective of both perspectives. AHP method was applied for analysis by developing an Analytic Hierarchical Model from this set and survey questionnaires of pairwise comparison to solicit 46 qualified expert responses. Findings - This study concurs with PM industry to acknowledge 'risk allocation', 'legal framework' and 'quality of feasibility' as ones of most important CSFs. However, relative importance rank of individual CSFs goes through significant modification under this study in favor of 'sponsor commitment and quality' but against 'political environment', in particular. Research implications or Originality - Discussions on the CSFs led by PM industry have not been properly reflective of project finance perspective, which is injected into this study to cure the partiality. For researchers, findings of this study may call attention to financing perspective when they discuss CSFs of PPP. Practitioners may benefit from this study by allocating resources in view of this new finding when pursuing PPP projects.

• 지식경영연구
• /
• 제21권2호
• /
• pp.59-75
• /
• 2020

In this paper, we investigate the influence of factors on the firm, industry, and country levels on the new product development performance (NPD) of manufacturing firms in advanced economies. The resource-based view, industrial organization theory and institutional theory have established that firm-, industry- and country-level factors are all relevant for the NPD of firms. However, little is known about the relative importance of factors at the three different levels across countries, as prior studies on firms' NPD have focused on specific countries and levels of analysis. Our analysis of survey data from 1,437 manufacturing firms in nine advanced OECD countries shows that while firm-level factors are generally better predictors of firms' innovativeness than either industry- or country-level factors, the results strongly differ across countries, indicating that the relative importance of antecedents of innovativeness is country-specific rather than universal.

• 한국언어정보학회지:언어와정보
• /
• 제3권2호
• /
• pp.1-12
• /
• 1999

There have been two opposing views on the structure of the so-called head internal relative construction(HIRC) in Korean/Japanese, i.e., a view that analyzes the HIRC categorially as a nominal projection and functionally as an argument(Kuroda 1992, Watanabe 1992, Hoshi 1996, Jhang 1991/1994, among others) vs. a view that analyzes the HIRC categorially as an adjunct clause and functionally as a non-argument(Murasugi 1994). This paper on the one hand points out several phenomena indicating that Murasugi's analysis is more viable, while on the other hand proposing a more complex structure than Murasugi's to account for other facts as well. The no/kes clause in the HIRC will be analyzed as the complement of a null perception verb whose projection constitutes part of an adjunct clause.

• 대한인간공학회지
• /
• 제17권3호
• /
• pp.41-59
• /
• 1998

Thermal comfort aspect of a locally-cooled target space in warm and humid environments(typically in the rainy summer season) was studied in view of PPD index. First. theoretical analyses were conducted to examine the effect of the governing parameters(such as air temperature, relative humidity and air velocity, etc.) using a computer model. Secondly, experimental investigations were also performed in a climatic room designed to simulate corresponding thermal conditions of outdoor environments. During the tests, temporal variation of PPD was recorded as functions of climatic variables(outdoor and indoor temperatures, relative humidity and air velocity) for the given human factors(metabolic heat generation and clothing). From both theoretical and experimental investigations, air temperature and air velocity were found to be the most dominant parameters affecting PPD of the target space. Results were summarized as: 1. Relative humidity of the locally-cooled target space tends to approach that of outdoor's as the space is subjected to an ON-OFF mode of cooling, since moisture potential of the two rooms reaches an equalized state as a result of moisture diffusion. 2. It was recognized that changes in relative humidity did not show any significance in view of thermal comfort as was reported in the previous studies, while variations of both temperature and air velocity caused relatively large changes in the degree of thermal comfort. 3. In-door environment should be evaluated in terms of PPD instead of relative humidity commonly recognized as an important climatic variable particularly in warm and humid environments.

• 소성∙가공
• /
• 제11권7호
• /
• pp.614-619
• /
• 2002

For an accurate measurement of the material behavior of small structures, a new optical experimental technique is proposed to measure the deformation. The test method uses the dual microscope that can measure the relative deformation of two adjacent regions. The magnified view is captured by CCD cameras and the relative deformation can be measured by the pattern matching and tracing method. Using this experimental technique, the deformation of solder joints in electronic packaging and the strain of the nickel thin film are measured.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.318-324
• /
• 1998

This study was conducted to derive optimal design floods by Generalized Extreme-value(GEV) distribution for the annual maximum series at ten watersheds along Han, Nagdong, Geum, Yeongsan and Seomjin river systems. Adequacy for the analysis of flood data used in this study was established by the tests of Independence, Homogeneity, detection of Outliers. L-coefficient of variation, L-skewness and L-kurtosis were calculated by L-moment ratio respectively. Parameters were estimated by the Methods of Moments and L-Moments. Design floods obtained by Methods of Moments and L-Moments using different methods for plotting positions in GEV distribution were compared by the relative mean and relative absolute error. It was found that design floods derived by the method of L-moments using weibull plotting position formula in GEV distribution are much closer to those of the observed data in comparison with those obtained by method of moments using different formulas for plotting positions in view of relative mean and relative absolute error.

• 복식
• /
• 제34권
• /
• pp.19-36
• /
• 1997

through Sid View Silhouette The purpose of this study was to pro-vide basic information for elderly women's clothing construction and to develop dress forms that can reflect the charac-teristics of their bodies. The subjects were 251 elderly women aged from 60 to 81. Data were collected from 34 photographic measurements of each subject and analyzed by factor analysis cluster analysis analysis of variance. The results were as follows: 1. A decrease in height the bustline drops as age increase. From a lateral view point most of the subjects have straight posture with protruding ab-domens but the somatotype gradually bends bends forward with age. 2) Five factors were extracted from photometric measurement which explain 81.0% of variance. 3 Through cluster analysis using 5 fac-tor scores four types were categorized. Type I was turning over somatotype Type II was swayback somatotype Type III was straight somatotype Type IV was bending somatotype according to its po-sition to the relative plumb liner and their side view contour.

• 한국의류학회지
• /
• 제20권2호
• /
• pp.373-389
• /
• 1996

The purpose of this study was to classify the somatotype based on the side view and to analyze the characteristics of each somatotype. The subjects were 201 middle-aged women aged from 35 to 54. Data were collected through anthropometry and photometry and analyzed by factor analysis, cluster analysis, analysis of variance, and discriminant analysis. As the result of factor analysis for the classification of somatotypes, 6 factors which explain 80.8% of variance were extracted from 35 photometric measurement. Using factor scores cluster analysis was carried out and the subjects were classified into 4 cluster Each cluster was classified as straight type, turning over type, bending type and swayback according to its position to the relative plumb line and their side view contour. And 4 somatotypes were analyzed by theirs direct anthropometric and indirect Photometric measurment to represent physical characteristics of each group.