• 전자공학회논문지B
• /
• 제33B권4호
• /
• pp.41-51
• /
• 1996

This paper presents a fuzzy data fusion scheme which can analyze the sensor condition, the strength and location of a force applied to a test material. These can be realized by the modelling and fusioning of sensor signals and sensor properties. The technique uses, as the inference variables, relative magnitude of data (RMD), absolute magnitude of data (AMD) initial state (IS), synchronized relational function (SRF) and asynchronized relational function (ARF). To show the usefulness of this scheme, an experiment on the cantilever bar and six strain gages is carried out. The location of the force is inferred from SRF and ARF and the strength from RMD and AMD. In particular, the strength is compared with the measurement data of the force sensor.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1999년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.306-309
• /
• 1999

Based on the principle of complementary energy, an analytical method is developed which focused on the end effects for determining thermal stress distributions in the claded beam. This method gives the stress distributions which completely satisfy the stress-free boundary condition at the edge. Numerical result shows that shear stress and peeling stress at the interface between the substrate and clad are significant near the edge and become negligible in the interior region. Even though the relative location where the maximum or minimum stresses take place moves to interior as the length of the beam become smaller, the absolute location from the free end and the value of these stresses are the same in spite of the variation of the length of beam.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.185-190
• /
• 2007

This article describes a development CDMA LBS in order to apply to "Control System of Underground Infrastructure Fire Accident" which one of U-City Projects of Seoul City. Our goal guides taking shelter of the sufferer it will not be able to use a GPS when the fire occurs from subway station. There are Location measurement methods which measures the AOA(Angle of Arrival) of the signal which it sends with the MS(Mobile station) from the BS(Base station), an electronic delivery time (TOA:Time of Arrival) and the relative difference of electronic arrival time from Base stations (TDOA:Time Difference of Arrival). This time the error due to a multiplex course error and near-far problem and NLOS(Non Line of Sight). We are planning to construct the Test Bed which is an error below 1 meter.

• International Journal of Contents
• /
• 제4권2호
• /
• pp.1-6
• /
• 2008

Pre schools with state of the art facilities that would provide not just academic excellence but also ensure the safety and provide efficient healthcare to their pupils relative to Atopic Dermatitis with Asthma is the main objective of this research One of the most promising applications of sensor networks is for human healthcare monitoring. Due to recent technological advances in sensor, low power microelectronics and miniaturization, and wireless networking enable the design and proliferation of this wireless sensor networks capable of autonomously monitoring and controlling environments. Thus, this research presents the utilization of such microelectronic sensor and plots the hardware and software architecture of a wireless sensor network system with real-time pupil monitoring that integrates vital sign sensors, location sensor and allergen sensor. This proposed architecture for wearable sensors can be used as active tags which can track pupil's location within the school's premises, identify possible atopic dermatitis with asthma allergens, it would monitor and generate a health status report of the pupil.

• 대한기계학회논문집B
• /
• 제26권11호
• /
• pp.1570-1577
• /
• 2002

In order to investigate the characteristics of two-phase slug flow, an electromagnetic flowmeter with 240Hz triangular AC excitation was designed and manufactured. The signals and noise from the flowmeter were obtained, and analyzed in comparison with the observations with a high speed CCD camera. The uncertainty of the flowmeter under single-phase flow was $\pm$ 2.24% in real-time. For two-phase slug flow, electromagnetic flowmeter provided real-time simultaneous measurements of the mean film velocity around Taylor bubble and the relative location and the length of the bubble. Besides, it is an easier and cheaper method for measuring mean film velocity than others such as photochromic dye activation method or particle image velocimetry.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.258-263
• /
• 1999

In this study, the numerical and experimental investigations were conducted to understand ultrasonic wave propagation and to evaluate the degree of fiber waviness in thick composites nondestructively. The path, energy and traveling time of insonified wave were predicted by adopting the ray and plane wave theories. In the analysis, the composites were assumed to have continuous fiber with sinusoidal waviness in a matrix and were modeled as stacks of infinitesimally short length off-axis elements with varying fiber orientation along the length direction. From the experiments on the specially fabricated thick composite specimens with various degrees of uniform fiber waviness, the energy distributions of received wave were obtain for the various positions of transmitter. It was observed that the energy of wave was converged to the adjacent peaks of fiber waviness. The location where maximum energy of wave was detected from the experiments showed good agreement with the location obtained from theoretical predictions. Finally, the test procedure was Proposed to evaluate fiber waviness in thick composites by considering the energy of wave and relative distance between transmitter and receiver.

• Journal of Mechanical Science and Technology
• /
• 제16권5호
• /
• pp.583-590
• /
• 2002

When a mechanical structure is driven by stationary wide band random point forces, the resulting vibration depends upon the number, location, and joint statistical properties of the exciting forces. In this study, under the assumption of light damping, an approximate procedure for analyzing plates is briefly outlined. The effects of number, location and correlation of the force field on the vibration level are then investigated for various cases in which random point forces with band limited white noise are applied, and the optimal spacing between input forces that produces a relative minimum in the vibration response is predicted.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.528-532
• /
• 1997

The structure of satellite was of six parts of control system, power system, thermal control system, remote measurement command system, propellant system and thrust system. In these parts, propellant system consists of propellant tank and thrust device. What we want to perform is optimum design to minimaize the weight of propellant tank. In order to design optimal propellant tank, several parameters should be adopted form the tank geometry like the relative location of the lug and variation of the wall thickness. So the analysis was executed by finite element analysis for finding optimal design parameters. The structure was devided into 3 parts, the initial thickness zone, the transitional zone, and the weak zone,whose effects on the pressure vessel strength was investigated. Finally the optimal lug location and the three zone thickness were obtained and the weight was compared with the uniform thickness vessel.

• 경영과학
• /
• 제16권2호
• /
• pp.1-11
• /
• 1999

A well-designed location strategy is an integral and important part of corporate strategy for retail firms. The last five years witnessed major changes in retailing industry. A growing city population, rising income levels. and the emergence of suburb areas presented ratailers with new challenges. Mass discount merchandisers and supermarkets expanded rapidly, spreading from Seoul into smaller cities. The rapid increase of mass discount stores raised new concerns and gave rise to the need from a systematic approach to location analysis. In this paper, we present the mathematical background and characteristics of DEA(Data Envelopment Analysis) model, and give a short case study where we apply the DEA model to compute the relative efficiency of 11 Korean mass discount merchandisers. Interpretation of the result is also provided.

• 한국정밀공학회지
• /
• 제19권9호
• /
• pp.142-150
• /
• 2002

This study describes a method of finding an optimal path of a soccer robot by using a concentric circle method with different radii of rotation. Comparing with conventional algorithms which try to find the shortest path length, the variable concentric circle method find the shortest moving time. The radius fur the shortest moving time for a given ball location depends on the relative location between a shooting robot and a ball. Practically it is difficult to find an analytical solution due to many unknowns. Assuming a radius of rotation within a possible range, total path moving time can be calculated by adding the times needed for straight path and circular path. Among these times the shortest time is obtained. In this paper, a graphical solution is presented such that the game ground is divided into 3 regions with a minimum, medium, and maximum radius of rotation.