• 제목/요약/키워드: relative light intensity

검색결과 208건 처리시간 0.02초

Effects of Ozone on $CO_2$ Assimilation and PSII Function in Two Tobacco Cultivars with Different Sensitivities

  • Yun, Myoung-Hui
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제22권E2호
    • /
    • pp.89-98
    • /
    • 2006
  • Two tobacco cultivars (Nicotiana tabacum L.), Bel-B and Bel-W3, tolerant and sensitive to ozone, respectively, were grown in a greenhouse supplied with charcoal filtered air and exposed to 200 ppb ozone for 4 hr. Effects on chlorophyll fluorescence, net photosynthesis, and stomatal conductance are described. Quantum yield was calculated from chlorophyll fluorescence and the initial slope of the assimilation-light curve measured by the gas exchange method. Only the sensitive cultivar, Bel-W3, developed visual injury symptoms on up to 50% of the $5^{th}$ leaf. The maximum net photosynthetic rate of ozone-treated plants was reduced 40% compared to control plants immediately after ozone fumigation in the tolerant cultivar; however, photosynthesis recovered by 24 hr post fumigation and remained at the same level as control plants. On the other hand, ozone exposure reduced maximum net photosynthesis up to 50%, with no recovery, in the sensitive cultivar apparently causing permanent damage to the photosystem. Reductions in apparent quantum efficiency, calculated from the assimilation-light curve, differed between cultivars. Bel-B showed an immediate depression of 14% compared to controls, whereas, Bel-W3 showed a 27% decline. Electron transport rate (ETR), at saturating light intensity, decreased 58% and 80% immediately after ozone treatment in Bel-B and Bel-W3, respectively. Quantum yield decreased 28% and 36% in Bel-B and Bel-W3, respectively. It can be concluded that ozone caused a greater relative decrease in linear electron transport than maximum net photosynthesis, suggesting greater damage to PSII than the carbon reduction cycle.

Light-emitting devices with polymer-organic heterostructure

  • Do, Lee-Mi;Hwang, Do-Hoon;Choi, Kang-Hoon;Lee, Hyang-Mok;Jung, Sang-Don;Zyung, Taehyoung
    • Journal of the Optical Society of Korea
    • /
    • 제1권2호
    • /
    • pp.116-119
    • /
    • 1997
  • Highly quantum efficient and multi-color emissible polymer light emitting devices have been realized utilizing poly (1-dodecyloxy-4-methyl-1, 3-phenylene)(2, 5"-terthienylene)(hereafter, mPTTh polymer) as an emitting layer and tris(8-hydroxyquinoline) aluminum (Alq3) as an electron transport layer. A single layer EL device of mPTTh polymer emits orange-colored light. EL efficiency increases as the thickness of Alq3 layer increases, but the emission color becomes visually broad when the Alq3 layer thickness is greater than 30nm since the relative peak intensity of green EL from Alq3 layer grows. EL color is changed from orange to greenish orange as the thickness of Alq3 layer grows. EL color is changed from orange to greenish orange as the thickness of Alq3 layer increases. EL efficiency of the double layer device was greatly enhanced by 3000 times compared with that of a single layer device. Alq3 layer in device acts as a hole blocking electron transporting layer and an emitting layer as a function of the thickness of Alq3 layer.ayer.

밀폐형 식물생산시스템 내 CO2와 광도에 따른 오이 및 토마토 묘의 생육 (Growth of Cucumber and Tomato Seedlings by Different Light Intensities and CO2 Concentrations in Closed-type Plant Production System)

  • 윤지혜;정현우;황소영;유진;황희성;황승재
    • 생물환경조절학회지
    • /
    • 제32권4호
    • /
    • pp.257-266
    • /
    • 2023
  • 본 연구는 밀폐형 식물생산 시스템(CPPS)에서 광도와 CO2 농도에 따른 오이와 토마토 묘의 생육을 조사하기 위해 수행되었다. 오이(Cucumis sativus L. 'Joeunbaekdadagi')와 토마토(Solanum lycopersicum L. 'Dotaerang Dia')를 50구 트레이에 파종하여 CPPS에서 25℃, 50% 상대습도에서 4일 동안 발아시켰다. 발아 후 CO2 농도 처리 및 광도는 각각500(무처리구), 1,000, 그리고 1,500µmol·mol-1 와 100, 200, 그리고 300µmol·m-2·s-1로 재배하였다. 오이의 엽면적은 광도보다 CO2 농도 변화에 영향을 받으며 1,500µmol·mol-1 CO2 농도 조건에서 엽면적이 가장 넓었다. 반면에 토마토의 엽면적은 CO2 농도와 광도 변화에 따른 유의미한 차이를 나타내지 않았다. 광도가 증가함에 따라, 오이와 토마토의 생육과 묘소질(충실도와 엽면적비)이 유의적으로 증가하는 경향을 나타냈고, 광도 300µmol·m-2·s-1에서 가장 높았다. 오이와 토마토 묘의 근권 표면적, 근단 수는 광도의 증가에 따라 유의적으로 증가하였다. 결론적으로 CO2 농도와 광도의 조절은 오이와 토마토 묘의 생육과 묘소질을 조절할 수 있으나, CO2 농도보다 광도의 영향을 크게 받았으며, 광도가 증가함에 따라 생육, 묘소질, 그리고 뿌리가 발달하는 경향이 나타났다.

UV-TiO$_2$ 광촉매 기반의 공기 정화 시스템의 운전조건에 대한 연구 (A Study on the Operational Variables of the UV-TiO$_2$ Based Photocatalytic Air Cleaning System)

  • 한창석;장혁상
    • 대한환경공학회지
    • /
    • 제30권3호
    • /
    • pp.293-301
    • /
    • 2008
  • UV-TiO$_2$ 광촉매를 이용한 공기 정화 시스템에 운전조건에 대한 연구가 수행되었다. 이 연구에서 시스템의 운영 조건이 바뀜에 따른 오염물질 제거 특성을 관찰하기 위해 덕트 형태의 반응기를 제작하고, 스테인레스 격자망에 TiO$_2$를 코팅하였다. 또한 benzene을 이용하여 UV/TiO$_2$ 공정으로 유입농도를 변화시키고, 반응기로 들어오는 유량을 조절하여 TiO$_2$를 코팅한 스테인레스 격자망을 부착한 평판에서의 유속을 변화시켰으며, 코팅한 TiO$_2$ 광촉매량을 변화시키고, 일정한 양의 TiO$_2$ 광촉매를 코팅한 면적을 변화시켰으며, UV light intensity를 변화시켜 그에 따른 영향을 관찰하였다. 모든 실험에서의 상대습도는 55%, 반응기 온도는 45$^{\circ}C$를 유지하였다. 실험의 결과를 살펴보면, benzene의 유입농도가 증가할수록 제거효율이 감소하였고, 유속이 느려질수록, 즉 농도 경계층 두께(concentration boundary layer thickness)가 증가할수록, 코팅한 광촉매량, 광촉매를 코팅한 면적, 조사한 UV 램프의 intensity가 증가할수록 benzene 제거효율이 증가하였다. 본 연구 자료를 바탕으로 실내 공기 중 저농도의 VOCs를 대상으로 공기 정화 시스템을 설계할 경우 유용하게 적용할 수 있는 자료를 제시할 수 있다고 판단된다.

광 검출기가 장착된 OLED 조명 시스템 (OLED Lighting System Integrated with Optical Monitoring Circuit)

  • 신동균;박종운;서화일
    • 반도체디스플레이기술학회지
    • /
    • 제12권2호
    • /
    • pp.13-17
    • /
    • 2013
  • In lighting system where several large-area organic light-emitting diode (OLED) lighting panels are involved, panel aging may appear differently from each other, resulting in a falling-off in lighting quality. To achieve uniform light output across large-area OLED lighting panels, we have employed an optical feedback circuit. Light output from each OLED panel is monitored by the optical feedback circuit that consists of a photodiode, I-V converter, 10-bit analogdigital converter (ADC), and comparator. A photodiode generates current by detecting OLED light from one side of the glass substrate (i.e., edge emission). Namely, the target luminance from the emission area (bottom emission) of OLED panels is monitored by current generated from the photodiode mounted on a glass edge. To this end, we need to establish a mapping table between the ADC value and the luminance of bottom emission. The reference ADC value corresponds to the target luminance of OLED panels. If the ADC value is lower or higher than the reference one (i.e., when the luminance of OLED panel is lower or higher than its target luminance), a micro controller unit (MCU) adjusts the pulse width modulation (PWM) used for the control of the power supplied to OLED panels in such a way that the ADC value obtained from optical feedback is the same as the reference one. As such, the target luminance of each individual OLED panel is unchanged. With the optical feedback circuit included in the lighting system, we have observed only 2% difference in relative intensity of neighboring OLED panels.

실내 환경 개선에 적합한 식물 선발을 위한 온도, 광도, 이산화탄소 농도에 따른 관엽식물들의 생리적 반응 (Plant Physiological Responses in Relation to Temperature, Light Intensity, and CO2 Concentration for the Selection of Efficient Foliage Plants on the Improvement of Indoor Environment)

  • 박신애;김민지;류명화;오명민;손기철
    • 원예과학기술지
    • /
    • 제28권6호
    • /
    • pp.928-936
    • /
    • 2010
  • 본 연구는 관엽식물 8종을 선정하여 온도, 광도, 이산화탄소 농도에 따른 식물의 광합성률을 포함한 생리반응을 살펴 보고, 그에 따른 실내 환경 개선에 효과적인 식물을 구명하고자 실시하였다. 식물재료로는 헤데라, 벤자민 고무나무, 파키라, 스파티필름, 시서스, 디펜바키아, 스킨답서스, 싱고니움을 사용하였으며, $16^{\circ}C$$22^{\circ}C$ 온도조건하에서 광도는 PPFD 0, 25, 50, 75, 100, 150, 300, 또는 $600{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$의 수준으로, 이산화탄소 농도는 0, 50, 100, 200, 400, 700, 또는 $1,000{\mu}molCO_2{\cdot}mol^{-1}$의 수준으로 조절하여 휴대용 광합성 측정기(Li-6400, Li Cor, USA)로 관엽식물들의 광합성 효율과 증산율을 측정하였다. 광도, 엽육내 이산화탄소 농도 변화, 그리고 온도에 따른 관엽식물들의 광합성 반응은 매우 다양했다. 약광(PPFD $0-100{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$)에서의 광합성 능력을 나타내는 순양자수율은 디펜바키아를 제외한 대부분의 종에서 높게 나타났으며, 고광(PPFD $200-600{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$)에서는 헤데라, 벤자민 고무나무, 파키라, 스파티필름이 높은 광합성능력을 나타내었다. 이산화탄소를 고정하는 암반응과 관련된 탄소고정효율은 시서스와 싱고니움을 제외한 6종의 관엽식물들에서 비교적 높게 나타났다. 고농도의 이산화탄소에서 광합성률이 높은 식물은 헤데라와 스파티필름이었으며, $22^{\circ}C$에서 자란 벤자민 고무나무와 파키라도 높은 광합성률을 보였다. 한편, 헤데라, 스파티필름은 증산율도 높게 나타났다. 따라서 저광, 고농도의 이산화탄소, 낮은 상대습도가 특징인 일반 가정이나 사무실 같은 실내 환경을 고려했을 때 헤데라, 벤자민 고무나무, 파키라, 스파티필름 등을 이용하는 것이 실내 환경 개선에 효과적이라고 판단되었다.

CMOS 기반 X선 영상의 해상력 향상을 위한 Gd2O2S:Tb 미세형광체 필름 제작 및 영상 질 평가 (Fabrication of Gd2O2S:Tb fine scintillator film and evaluation of image quality for resolution improvement of X-ray imaging based on CMOS)

  • 강상식;최영준;정봉재;노시철;조창훈;윤인찬;박지군
    • 한국방사선학회논문지
    • /
    • 제5권5호
    • /
    • pp.283-287
    • /
    • 2011
  • 본 연구는 고해상도 디지털 X선 영상 검출기 적용을 위해 미세 $Gd_2O_2S$:Tb 형광체 분말을 저온 액상법을 이용하여 합성하였다. 제조된 형광체 분말을 이용하여 입자침전법을 이용하여 형광체 필름을 제작하여 발광특성을 조사하였다. 측정결과, Tb 첨가농도에 따른 상대적인 발광량 측정결과 5 wt%의 첨가농도에서 가장 높은 발광효율을 보였으며, 첨가농도가 증가할수록 소광현상에 의한 발광강도가 급격히 감소하는 경향을 보였다. 또한 270 ${\mu}m$ 두께의 $Gd_2O_2S$:Tb에서 2945 pC/$cm^2$/mR의 발광 강도를 가졌으며, 발광 강도가 거의 포화되는 것을 관찰할 수 있었다. 끝으로 제조된 형광체의 영상획득 성능을 평가하기 위해 상용화된 CMOS 센서를 이용하여 X선 영상을 획득하여 MTF, NPS를 측정하여 DQE 평가를 수행하였다. 측정결과, DQE(0)의 값은 37%로 다소 낮은 값을 보였다. 향후 필름 제조 공정상의 문제점을 해결한다면, DQE를 개선할 수 있을 것으며, 고해상도 의료 방사선 영상 시스템 적용에 유용하게 적용 가능할 것으로 판단된다.

스피노달 분해와 기핵성장에 따른 상분리 과정의 광산란 패턴의 관찰 (The Observation of Scattering Patterns During Membrane Formation: Spinodal Decomposition and Nucleation Growth)

  • 강종석;허훈;이영무
    • 멤브레인
    • /
    • 제12권2호
    • /
    • pp.97-106
    • /
    • 2002
  • Polysulfone (PSf/NMP/alcohol 용액과 chlorinated poly(vinyl chloride) (CPVC)/THF/Alcohol 용액에 대한 광산란 패턴을 SALS (Small angle light scattering)와 FE-SEM (field emission scanning electron microscope)을 이용하여 조사하였다. PSf 용액에서는 시간에 따라 q값의 최대 산란 강도를 보이는 광산란 거동을 나타내어 스피노달 (SD) 상분리 거동을 나타내는 반면, CPVC 용액에서는 q값이 증가함에 따라 광산란 강도가 줄어드는 핵성장 (NG) 거동을 나타냈다. 각 고분자 용액에서 상분리 중반과 후반부에서 비용매 첨가제로 사용된 알코올의 탄소수가 증가할수록 농도분극의 증가율은 줄어들었다. 또한, SD에서의 초반부의 시간에 따른 산란 강도는 비용매 첨가제의 종류에 무관하게 Cahn의 건형 이론에 잘 부합되었다. 또한, SALS 장치로 얻어진 기공크기와 전자현미경으로 얻어진 영역 크기는 상호간에 비교되었다. 20PSf/70NMP/10n-butano1 (w/w%) 용액에 대한 산란 패턴은 초기 상분리 거동에서부터 후기 거동까지 매우 선명하게 관측되었고, 초반, 중반, 그리고 후반부에 대한 SD에 대한 이론적 결과와 잘 일치하였다. 최고의 산란강도를 나타낸 각도의 크기는 n-butanol>n-propanol>methanol>no alcohol 순으로 관찰되었으며, 이 순서로 최종 형성된 막 단면의 기공 크기가 감소되는 것으로 조사되었다.

Acridine Fluorescence Behaviors in Different Polymeric Microenvironments Directed by C2-Proton-Acidity of Imidazolium-Based Ionic Liquids

  • Ji, Myoung-Jin;Kim, Jong-Gyu;Shin, Ueon-Sang
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권8호
    • /
    • pp.2489-2493
    • /
    • 2012
  • A new fluorescent system (acridine/RTIL hybrid gel) confined in the 3D micro-structure of a poly(lactic acid) membrane were prepared from 1-butyl-3-methylimidazolium-based ionic liquids ([bmim]X (X = $SbF_6$, $NTf_2$, Cl); RTILs), poly(lactic acid) (PLA), and acridine via the sol-gel route. SEM images showed that, in the presence of [bmim]$SbF_6$ and [bmim]$NTf_2$, 3D-ly paticulated structures were created inside the PLA membranes and acridine/RTIL hybrid gels were confined in gabs of particulates. However, the use of [bmim]Cl induced the formation of a 3D-ly porous structure containing the hybrid gel of acridine/[bmimCl in the micropores. The three fluorescent systems exhibited different fluorescence behaviors (fluorescence maximum and intensity) depending on the C2-H acidity scale of the RTILs (or their anion type). Acridine gels hybridized with [bmim]$SbF_6$ and [bmim]$NTf_2$ showed blue fluorescence with relative high intensity, whereas the hybrid gel with [bmim]Cl exhibited almost no fluorescence under dry conditions. However, the acridine/[bmim]Cl hybrid system in the micro-porous PLA membrane started to emit fluorescent light under humid conditions and showed a possible response, indicating that it could be applied as a humidity sensor.

건축자재의 산화티타늄 코팅을 통한 휘발성 유기화합물 분해 (Destruction of Volatile Organic Compounds Using Photocatalyst-Coated Construction Materials)

  • 조완근;전희동
    • 한국환경과학회지
    • /
    • 제14권8호
    • /
    • pp.785-792
    • /
    • 2005
  • In order to reduce roadside and indoor air pollution for volatile organic compounds VOC), it may be necessary to apply photocatalyst-coated construction materials. This study evaluated the technical feasibility of the application of $TiO_2$ photocatalysis for the removal of VOC present in roadside or indoor air. The photocatalytic removal of five target VOC was investigated: benzene, toluene, ethyl benzene and o,m,p-xylenes. Variables tested for the current study included ultraviolet(UV) light intensity coating materials, relative humidity (RH), and input concentrations. Prior to performing the parameter tests, adsorption of VOC onto the current experiment was surveyed, and no adsorption was observed. Stronger UV intensity provided higher photocatalytic destruction(PCD) efficiency of the target compounds. For higher humidity, higher PCD efficiency was observed. The PCD efficiency depended on coating material. Contrary to certain previous findings, lower PCD efficiencies were observed for the experimental condition of higher input concentrations. The current findings suggested that the four parameters tested in the present study should be considered for the application of photocatalyst-coated construction materials in cleaning VOC of roadside or indoor air.