• Journal of Sport and Applied Science
• /
• v.2 no.2
• /
• pp.1-10
• /
• 2018

Prior literature has posited that the sport industry has been effective method to drive the economic growth. Given the rationale, this study sets China as a research object with a quarterly data from the first quarter of 2003 to the fourth quarter of 2017 to explore how the sport industry affects economic growth. This study employed Johansen cointegration test and dynamic ordinary least squares as methods for an empirical analysis. The input of sport industry, the labor input, the capital input, and the economic growth are used as research variables. The results show that there is a long-run relationship among them. Johansen cointegration test's estimation indicated that 1% increase in the input of sport industry will lead to 0.064% increase in economic growth. Dynamic ordinary least squares' estimation showed that whenever in the one lead, in the one lag and in the present period, the input of sport industry always poses a positive effect on economic growth. Labor input also has a positive effect on economic growth. The capital input has a negative effect on economic growth. Finally, even though the input of sport industry has a positive effect on economic growth, its impact on economic growth is relative weak.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.303-308
• /
• 2009

This study was conducted to analyze the feasibility of plant growth under low pressure and to investigate the effect of pressure on plant growth. Three levels of pressures (25, 50, and 101.3 kPa (control)) were provided to analyze the growth of Lettuce (Lactuca sativa L.) as affected by low pressure. Photoperiod, air temperature, and photosynthetic photon flux were set at 16/8 h, 26/$18^{\circ}C$, and $240{\mu}mol{\cdot}m^{-2}s^{-1}$, respectively. Growth characteristics of lettuce were measured on 7 days and 14 days after experiment. Leaf length, leaf width, leaf area, and root dry weight of lettuce measured on 7 days under 25 and 50 kPa were significant as compared to the control. Leaf length, top dry matter and root dry matter of lettuce measured on 14 days were significantly different under 25 and 50 kPa. From these results, we confirmed that lettuce could be grown under low pressure. However high relative humidity by evapotranspiration from leaves and growing beds under low pressure caused the condensation on the inner surface of the chamber. Therefore in a low pressure chamber, humidity control is required to maintain the relative humidity at a proper level.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.3
• /
• pp.353-358
• /
• 1999

This study is to find out the effects of various iron concentrations on growth, feeding and feed efficiency of olive flounder, Paralichthys olivaceus, The growth rate, feeding rate and feed efficiency of olive flounder in each experiments were represented by the relative value. The relative growth rate and relative feed efficiency of olive flounder were kept almost constant below the iron concentration of 1.0 mg/$\ell$, but were significantly decreased above the 5,0 mg/$\ell$ iron concentration. The growth rate, feeding rate and feed efficiency of olive flounder exposed to 10.0mg/$\ell$ iron concentration were significantly decreased than that exposed to normal condition. From these results, it could be concluded that the high level of 5.0 mg/$\ell$ iron concentration in the bottom water would curtail production of olive flounder in coastal area.

• Development and Reproduction
• /
• v.10 no.2
• /
• pp.93-96
• /
• 2006

The total length, head length, head height, eye diameter, retina thickness, and lens diameter of the dotted gizzard shad, Konosirus punctatus, showed positive allometric relationships between hatching and 30 days post-hatching (dph). The increase in total length relative to head length and head height, head length growth relative to eye and lens diameter, head height growth relative to eye diameter and lens diameter, and thickness of the retina relative to eye diameter, lens diameter, head length, and head height were showed allometric relationships. The eyes were formed completely at 9 dph. At this age, the eye has a lens, an optic nerve fiber layer, a ganglion cell layer, an inner plexiform layer, an inner nuclear layer, an outer plexiform layer, an outer nuclear layer, an outer limiting membrane, a rod and cone layer, and an epithelial layer. The essential demands that must be met by the retina in this species pertain to light sensitivity and spatial resolution.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.160-165
• /
• 2005

Since the growth and quality of oak mushrooms are sensitively affected by environmental conditions, an adequate environmental control is very essential to improve the yield and quality under protected cultivation. In this study, the diameter, thickness, length and hardness of cap and stipe, the dry weight, fresh weight and moisture content of the mushrooms were analyzed under the environmental conditions such as night air temperatures (control, $5{\~}11^{\circ}C$ and $12{\~}18^{\circ}C$), relative humidities in the daytime (control, humidifying for 6 h and 12 h), and wind velocities (control, fan-operation for 6 h and 12 h). At a lower night temperature, the quality of the mushrooms was improved, and considered to be optimum at $3{\~}8^{\circ}C$ in terms of fresh weight and quality. At $70{\~}80{\%}$ of relative humidity in the daytime, the fresh weight was increased, but the quality decreased. Considering the quality, the relative humidity in the daytime is adequate at around $50{\%}$. At 6 h of maintaining the wind velocity at $1{\~}2\;my{\cdot}s^{-1}$, the growth and quality were better, but the lightness became higher at 12 h although the fresh weight was reduced by evaporation. It is concluded that even though both of the yield and quality are not easily improved at a same time, optimum approaches should be required by using the relationship among environmental factors and the growth and quality.

• Journal of Biosystems Engineering
• /
• v.30 no.2 s.109
• /
• pp.110-113
• /
• 2005

Relative humidity of air In the greenhouse has to be maintained at 70 to 80 percents to provide a better growth condition of crops. To control relative humidity of air in the greenhouse, a dehumidifier functioning by refrigeration cycle was designed and manufactured in this study. And, results of its performance test in the greenhouse site were reported. The developed dehumidifier has separated condenser and evaporator in the heat exchanger part in order to increase dehumidifying capacity at a low temperature condition. When the conditions of incoming air into the dehumidifier were temperature of $15\~25^{\circ}C$ and relative humidity of $0\~95\%$, quantity of condensed water per hour, ie, dehumidification rate was $4.7\~7.0\;kg/hr$. Relative humidity difference was not greater than 5 percents at various locations in the greenhouse due to proper distributing of dehumidified air through vinyl duct. Thermal energy output from the developed dehumidifier was about 8,5000 kcal/hr that was 7 percents of maximum greenhouse heating load of 10 a.

• Journal of Korean Society for Quality Management
• /
• v.49 no.1
• /
• pp.61-79
• /
• 2021

Purpose: The purpose of this study is to study the relative weights of Quality Scorecard (QSC) which was developed for a new quality concept, called Open Quality, in the era of Industry 4.0. Open Quality aims to ensure quality responsibility by accurately measuring the quality level and sharing the quality data with stakeholders. Methods: To analyze the importance of QSC, a survey study was conducted based on 10 types of industry. The relative weights of QSC measures are investigated by both the industry types and the organizational life cycle. Further, the relative importance of QSC was analyzed according to the organization's lifecycle. By dividing the aspects with respect to the result data, application method for QSC is further provided. Results: The result indicates that there are significant differences among Korean companies in terms of the level of Industry revolution stages. Among ten industry types, manufacturing and finance sectors show the highest importance of QSC. QSC measures are also considered more importance in growth stage of the maturity cycle than generator and decline stages. Conclusion: When QSC is adopted for Open Quality, its relative weights must be considered to cope with the unique characteristics of industrial types. Besides, QSC's contribution may vary according to the level of maturity of the target company.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.2
• /
• pp.179-187
• /
• 2015

Experiments designed to measure the effect of LED (light-emitting diode) light wavelength on the growth of fingerling rockfishes (Sebastes inermis) were conducted. Fingerling rockfishes (average body weight of individual: 1.13g) were divided into two groups by wavelength of the LED light [light power: 1,620 mW; wavelength: 518 nm (green color), 622 nm (red color)]. Triplicate groups of 180 individuals were reared over 7 weeks. Lighting duration was 14 hours from 06:00 to 20:00. A water tank exposed on the natural light in a room through the windows was used as a control. At results of the first experiment [initial average body weight (BW) of individual: 1.13 g; standard deviation (SD): 0.13 g], the final individual BW exposed on the green color was increased 0.39 g than the red color, and decreased 0.12 g than the natural light in the room. At results of the second (initial individual BW: 5.07 g; SD: 0.70 g) and the third experiment (initial individual BW: 10.67 g; SD: 0.67 g), the final individual BW exposed on the green color was increased 1.07 g and 2.55 g than the red color, respectively, and increased 0.57 g and 0.84 g than the natural light, respectively. The relative growth rate of the green color was higher about 8% significantly (p<0.05) than the natural light. In the case of the red color the relative growth rate was lower significantly (p<0.05) than the natural light.

• International Area Studies Review
• /
• v.12 no.2
• /
• pp.99-123
• /
• 2008

In this paper, technology gap between Korea's manufacturing industries compared to technology frontier countries was estimated in order to take into account Korea's status as a technology follower country. Then by using this measure the role of technology gap was investigated in explaining total factor productivity growth of the Korean manufacturing at industry level. The main empirical findings are as follows: First, the conventional factors that were emphasized in the previous literature such as R&D intensity, trade openness and human capital play important role in explaining the growth rate of Korea's total factor productivity. Second, the larger the technology gap between Korea and technology leader country (and the faster the technology growth rate in the leader country), the higher the growth rate of total factor productivity in Korea as well. Third when the technology gap is large, the most efficient way of absorbing higher technology from frontier country seems to be the international trade channel rather than R&D or human capital accumulation.

• Journal of People, Plants, and Environment
• /
• v.23 no.5
• /
• pp.545-554
• /
• 2020

Background and objective: Moth orchids in the vegetative stage are suitable for a multi-layer growing environment in a closed-type plant factory which can be a good alternative that can reduce production costs by reducing cultivation time and energy cost per plant. This study was conducted to find out the optimal rhizospheric environment for different irrigation methods without a potting medium and rhizospheric ventilation for the vegetative growth of young Phalaenopsis hybrid 'Blanc Rouge' (P. KV600 × P. Kang 1) and Phalaenopsis Queen Beer 'Mantefon' in a closed-type plant factory system. Methods: The one-month-old clonal micropropagules with bare roots rapped with a sponges were fixed on the holes of styrofoam plates above growth beds, and were watered using the ebb-and-flow (EBB) and aeroponic (AER) methods with Ichihashi solution (0.5 strength) once a day at 06:00 (P) or 18:00 (S), and both (PS). Rhizospheric ventilation (V) was also applied to change the temperature, relative humidity, and CO₂ concentration of the beds. Plants potted into sphagnum moss and watered once a week were used as the control group. Results: After 12 months of treatment, the growth characteristics of the EBB groups were the best among the treatment groups without a medium, but no effect of irrigation timing was observed. V reduced the temperature, relative humidity and CO₂ concentration of the beds. Whereas, EBB+V (ebb-and-flow with ventilation) improved plant growth and reduced the occurrence of disorders and withering. Especially, EBB+V showed a similar performance to the control group. Conclusion: The results indicated that the optimal irrigation method without a potting medium for producing middle-aged potted moth orchids was the EBB system with forced rhizospheric ventilation. Therefore, further studies on the optimal ventilation method and moisture control of the crown need to be carried out to develop the irrigation system without a potting medium for vertical farming in closed-type plant factories.