• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.719-722
• /
• 2002

Cylindrical cam mechanisms are used commonly in many automatic machinery. But the cylindrical cam is very difficult to design and manufacture the shape. The motion analysis of the cylindrical cam can check the accuracy between designed data and manufactured data of the cam shape and can reproduce without the cam design data. The motion analysis of the cylindrical cam consists of displacement analysis, velocity analysis and acceleration analysis. This paper performs the motion analysis of a cylindrical cam with translating follower by using a relative velocity method and a central difference method. The displacement is calculated by using the central difference method and the velocity is calculated by the relative velocity method. The relative velocity method is defined by the relative motion between follower and cam at a center of a follower roller. The central difference method is derived in the 3 dimensional space.

• 정보보호학회논문지
• /
• 제12권2호
• /
• pp.11-20
• /
• 2002

본 논문에서는 q는 p의 멱승이고, $F_{q^{n}}$이 원소의 개수가 $q^{n}$ 개인 유한체라 할 때, $F_{q^{n}}${0}으로부터의 $F_{q}$ 로의 차균형 성질을 갖는 d-동차함수로부터 (equation omitted) 순회상대차집합이 얻어질 수 있음을 보인다. 이에 따라 주기가 $q^{n}$ -1이고, 이상적인 자기상관성질을 갖는 p진 시퀀스 Helleseth-Gong 시퀀스 및, d-형 시퀀스로부터 (equation omitted)의 파라미터를 갖는 새로운 순회상대차집합을 생성시킨다.

• Korea-Australia Rheology Journal
• /
• 제17권4호
• /
• pp.149-156
• /
• 2005

A simple constitutive model for viscoelastic suspensions is discussed in this paper. The model can be used to predict the rheological properties (relative viscosity and all stresses) for viscoelastic suspensions in shear and elongational flow, and the constitutive equations combine a 'viscoelastic' behaviour component and a 'Newtonian' behaviour component. As expected, the model gives a prediction of positive first normal stress difference and negative second normal stress difference; the dimensionless first normal stress difference strongly depends on the shear rate and decreases with the volume fraction of solid phase, but the dimensionless second normal stress difference (in magnitude) is nearly independent of the shear rate and increases with the volume fraction. The relative viscosities and all the stresses have been tested against available experimental measurements.

• 지질공학
• /
• 제33권2호
• /
• pp.229-240
• /
• 2023

연약지반 개량공사 시 계측기를 설치하여 경제적이고 안전한 시공이 이루어지도록 관리한다. 데이터 분석 시 시간에 따른 침하량 데이터를 활용하여 전체적인 지반 침하 거동을 파악할 수 있지만, 계측지점 간 상호관련성을 분석하기에는 어려움이 있다. 따라서 계측지점 간의 상대적인 압밀침하 거동을 분석하기 위하여, 침하량과 속도를 가공하여 평균 침하량 차이 지수와 기울기 차이 지수로 정의한 후, 평균 침하량 차이 지수 - 기울기 차이 지수(AS_i,j-SDI_i,j) 좌표계에 도시하였다. 계측지점 간 상대적인 압밀침하 거동 분석결과 평균 침하량 차이 지수 - 기울기 차이 지수 좌표계에 나타낸 계측지점 간의 관계가 압밀이 완료됨에 따라 영역 1로 이동하였다. 관측점의 이동 경로를 해당 좌표계에 연속적으로 나타냄으로써 계측지점 간의 상대적인 압밀침하 거동관계를 분석하였으며, 이동경로 방향에 따라 두 계측지점의 압밀침하 거동관계가 안정한 상태인지 불안정한 상태인지 확인할 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.120-123
• /
• 2004

The bending phenomenon has been known to be occurred by the difference of velocity at the die exit. The difference of velocity at the die exit section can be obtained by the different velocity of billets inside die chamber after passing the multi-hole container. The curvature can be controlled by the two variables, the one of them is the different velocity of billets through the multi-hole container, the other is the difference of hole diameter. The bending phenomenon during extruding using four billets can be obtained by the difference of hole diameters in the multi-hole container or by the difference of relative velocity of billet inserted in the container. As results of DEFORM-3D analysis, it can be shown that bending can be obtained during extruding by the difference of relative velocity of two billets or by the difference of hole diameter, and the amount of curvature is increased by the difference of velocity and diameter. According to the shape of products, the curvature of rectangular section is bigger than the curvature of regular square section. And, it is estimated that, because the stress on the welding line is much higher than yield stress of material, the bonding of four billets can be obtained.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.57-65
• /
• 2012

PURPOSES: It is important to consider the long-term performance of concrete pavement, because concrete pavement is more exposed to the various environmental conditions than any other concrete structures. One of the several methods to evaluate the long-term performance of concrete during winter is KS F 2456. Relative dynamic modulus of elasticity shows the resistance to freezing and thawing. METHODS: To measure relative dynamic modulus of elasticity, ultra sonic is generally used. But in this study, to measure the relative dynamic modulus of elasticity, both ultra sonic and shear wave were used and then compared each other. RESULTS: The results from the measurement by ultrasonic wave and shear wave were divided into three types. Type 1 : Specimens are good and relative dynamic modulus of elasticity did not decrease until 300 cycle. Type 2 : The relative dynamic modulus of elasticity decreased from the late cycle.(about 150 cycle later) Type 3 : The relative dynamic modulus of elasticity consistently decreased from the beginning. As a result of ANOVA, there is no difference according to measuring method, in type 2 and 3. But there is a difference according to measuring method, in type 1's relative dynamic modulus of elasticity. CONCLUSIONS: It is proved that shear wave can be used to understand the damage tendency of relative freezing and thawing and to measure the relative dynamic modulus of elasticity.

• 한국어교육
• /
• 제29권4호
• /
• pp.93-112
• /
• 2018

The purpose of this study is to deal with vocabulary in KFL. As a result of this study, learners learned vocabulary on average 43 points through contextual inference and introduction of the class to activate background knowledge. In particular, the implicit method showed the highest learning rate of 52 points, and the thematic method had a 41 point-learning rate. In contrast, the semantic method was the lowest with a 25 point-learning rate. There was no significant difference in the improvement rate of upper vocabulary learners, but in the case of the lower learner, there was significant difference in the improvement rate. The difference was not significant in the post-test relative gain rate of upper learners, but there was significant in lower learners. In the delayed test relative gain rate, the difference was significant in all groups. There was correlation between vocabulary difficulty and score, but there was no correlation with the thematic method. And there was no correlation between vocabulary difficulty, improvement rate and relative gain rate in all three classes. However, content understanding, lexical grade, improvement rate, and relative gain rate showed a significant correlation.

• International journal of advanced smart convergence
• /
• 제12권2호
• /
• pp.167-172
• /
• 2023

In this study, the absolute and relative strength of six upper extremity resistance exercises were measured by classifying resistance exercise experts and non-experts. As a result, the skilled group showed higher absolute and relative muscle strength than the unskilled group in the 6 upper extremity resistance exercises. These results are judged to be the hypertrophy of fast-twith muscles, the mobilization of motor units, and the increase in the speed of nerve conduction while the skilled person consistently performs resistance exercise. Experts use intermuscular coordination efficiently to stably perform the load according to the movement and exercise intensity performed during exercise, whereas the inexperienced person uses relatively large muscle groups rather than efficiently using intermuscular coordination. It is considered that exercise motion and load were performed by mobilizing. In addition, as a result of comparing the absolute and relative muscle strength between the 6 types of upper limb resistance exercises, there was a difference between the 6 types of upper limb resistance exercises in the two groups. It can be judged that greater muscle strength and endurance were created through liver coordination.

• 한국통신학회논문지
• /
• 제41권12호
• /
• pp.1768-1770
• /
• 2016

본 논문에서 상대 차족을 이용하여 분산 저장 부호의 한 종류인 분할 반복 부호를 설계하는 방법을 제안한다. 제안하는 부호는 각 데이터 심볼마다 다른 반복 차수를 지원할 수 있다. 모의실험을 통하여 제안하는 부호가 랜덤 분할 반복 부호보다 더 많은 양의 데이터를 저장할 수 있음을 보인다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제9권1호
• /
• pp.91-98
• /
• 2005

The straight rectangular fin is analyzed using the one-dimensional analytic method and the finite difference method. For the finite difference method, the numbers of nodes vary from 20 to 100. The relative errors of heat loss and temperature between the analytic method and the finite difference method are represented as a function of Biot Number and dimensionless fin length. One of the results shows that the relative error between the analytic method and the finite difference method decreases as the numbers of nodes for finite difference method increase.